< Back ×
2010 GMC Sierra 3500 HD Steering Shaft
My Vehicle Change Vehicle
2010 GMC Sierra 3500 HD
< Back to View All
Steering Systems
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Sierra 3500 HD Intermed Shaft
PartNumber: 84370714$148.60 MSRP:$245.96You Save: $97.36 (40%)Product Specifications- Notes: Silverado, Sierra
- Other Names: Coupling, Intermed Shaft, Lower Shaft, Upper Shaft
- Item Dimensions: 25.2 x 6.3 x 6.2 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 23167615, 25809424, 23381952
- Replaced by: 85104192
- Part Description: 2010 GMC Sierra 3500 HD Intermed Shaft
Vehicle Fitment- 2010 GMC Sierra 3500 HD | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Product Specifications- Color: Black
- Diameter: 1.2
- End 1 Type: Internal Profile
- Installation Instructions Included: No
- Length: 16.4
- Material: Steel
- Mounting Hardware Included: No
- Package Contents: 1 Steering Shaft
- Spline Quantity: 0
- Universal Joint Quantity: 1
- Universal Joints Included: Yes
- UPC: 889245911896
- Part Description: 2010 GMC Sierra 3500 HD OE Solutions Steering Shaft
Vehicle Fitment- 2010 GMC Sierra 3500 HD | All Trims | All Engines
OEM (Genuine) 2010 GMC Sierra 3500 HD Lower Shaft
PartNumber: 25958108$45.42 MSRP:$114.32You Save: $68.90 (61%)Product Specifications- Notes: 3/4 & 1 Ton
- Other Names: Coupling, Coupling Shaft
- Item Dimensions: 24.7 x 6.4 x 6.2 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15772436
- Replaced by: 19420425
- Part Description: 2010 GMC Sierra 3500 HD Lower Shaft
Vehicle Fitment- 2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Product Specifications- Finish: Black/Epoxy E-coat
- Installation Instructions Included: No
- Material: Steel
- Mounting Hardware Included: No
- OE Part Number: 25809424, 15775842, 23167615, 23381952
- Shaft Diameter: 3.25"
- Shaft Length: 9.75"
- Spline Count: 0
- UPC: 019495432685
- Part Description: 2010 GMC Sierra 3500 HD Upper Intermediate Steering Shaft
Vehicle Fitment- 2010 GMC Sierra 3500 HD | All Trims | All Engines
FAQ for Steering Shaft Repair
Q: How to service the Steering Shaft Lower Bearing?
A:
You should release the plastic retaining tabs and slide the steering shaft lower bearing out of the steering column.
By Bob
GM Specialist
02/11/2022Q: How to remove the Steering Shaft Upper Bearing?
A:
You should remove the steering column, the inflatable restraint steering wheel module coil, the turn signal multifunction switch, the ignition lock cylinder case, the tilt spring, the automatic transmission control, the steering shaft lock plate retaining ring, the 2 pivot pins, the steering column tilt head assembly, anti-rotation pin J 42640, the tilt lever and the steering shaft upper bearing from the steering column tilt head assembly.
By Bob
GM Specialist
02/11/2022Q: How to remove the Steering Shaft Coupling?
A:
You should remove the engine shield, the steering shaft coupling bolt, the steering shaft coupling nut, the bolt, and the steering shaft coupling from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the steering shaft coupling bolt?
A:
The recommended torque is 47 Nm (35 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to install the Steering Shaft Coupling?
A:
You should install the steering shaft coupling nut and the bolt, the steering shaft coupling bolt, and the engine shield.
By Bob
GM Specialist
02/11/2022Q: How to install the Steering Shaft Upper Bearing?
A:
You should install the steering shaft upper bearing to the steering column tilt head assembly, the steering column shaft assembly, anti-rotation pin J 42640, the new steering shaft lock plate retaining ring, the automatic transmission control assembly, the tilt spring, the ignition lock cylinder case, the turn signal multifunction switch, the inflatable restraint steering wheel module coil, and the steering column.
By Bob
GM Specialist
02/11/2022See more FAQs (1)