< Back ×
My Vehicle Change Vehicle
2010 GMC Terrain
< Back to View All
ABS & Parking Brake
- Department
- Prices
OEM (Genuine) 2010 GMC Terrain ABS Control Unit
PartNumber: 23156466
Product Specifications- Notes: Equinox, Terrain
- Other Names: ABS Control Unit, Modulator Valve
- Item Dimensions: 9.8 x 7.5 x 6.1 inches
- Item Weight: 5.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25926939
- Part Description: 2010 GMC Terrain ABS Control Unit
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$256.01 MSRP:$483.04You Save: $227.03 (48%)
OEM (Genuine) 2010 GMC Terrain Module
PartNumber: 20925650
Product Specifications- Notes: Reverse Sensing System
- Other Names: Control Module, Module
- Item Dimensions: 8.9 x 5.5 x 4.5 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 13308136, 20832809, 20895116
- Part Description: 2010 GMC Terrain Module
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$110.03 MSRP:$175.51You Save: $65.48 (38%)
OEM (Genuine) 2010 GMC Terrain Control Module
PartNumber: 25926937
Product Specifications- Notes: Equinox, Terrain
- Other Names: Control Module
- Item Dimensions: 6.2 x 4.1 x 4.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Terrain Control Module
Vehicle Fitment- 2010 GMC Terrain | SLE, SLT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
FAQ for Abs Control Module Repair
Q: What is the removal procedure for the Electronic Brake Control Module?
A:
The procedure is to place the ignition switch in the OFF position, remove the accessory wiring junction block, clean the electronic brake control module (EBCM) to brake pressure modulator valve (BPMV) area of any dirt or debris, disconnect the EBCM electrical connector, remove the 4 EBCM bolts, pull the EBCM from the BPMV and remove the 12 EBCM seals.
By Bob
GM Specialist
01/11/2022Q: How do you install the Electronic Brake Control Module?
A:
You can install the EBCM seals, the EBCM, the 4 EBCM bolts, and the accessory wiring junction block, program the EBCM, place the ignition switch in the ON position and perform the Diagnostic System Check - Vehicle.
By Bob
GM Specialist
01/11/2022