< Back ×
2010 GMC Terrain Liftgate Hinge
My Vehicle Change Vehicle
2010 GMC Terrain
< Back to View All
Trunks & Tailgates
- Department
- Prices
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Hinge
- Item Dimensions: 5.4 x 2.7 x 2.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25803445
- Part Description: 2010 GMC Terrain Hinge
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Liftgate Hinge Repair
Q: What tools can be used to mark the liftgate hinge position to the body before removing the Liftgate Hinge?
A:
You can use a grease pencil.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the striker bolts?
A:
You can tighten the bolts to 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Liftgate Hinge?
A:
You should remove the liftgate.
By Bob
GM Specialist
01/11/2022Q: How do you adjust the Liftgate Lock Striker?
A:
You can close the liftgate onto the striker, note if the liftgate drags on the striker, mark around the striker with a grease pencil, loosen striker bolts, move the striker to eliminate drag on the striker and liftgate latch and achieve proper liftgate position within the liftgate opening, align the left/right liftgate position, position the striker to achieve proper alignment to liftgate opening, align the in/out adjustment for proper liftgate seal engagement, verify correct alignment of the striker and tighten striker bolts.
By Bob
GM Specialist
01/11/2022Q: How many nuts does the liftgate hinge have?
A:
The liftgate hinge has a total of 4 nuts.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Liftgate Lock Striker have?
A:
The Liftgate Lock Striker has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What should you do to ensure proper alignment throughout the installation procedure for the liftgate lock striker?
A:
You should mark the location of the striker with a grease pencil to ensure proper alignment during installation.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Liftgate Lock Striker?
A:
You should remove the rear-end trim finish panel.
By Bob
GM Specialist
01/11/2022See more FAQs (3)