< Back ×
My Vehicle Change Vehicle
2010 GMC Terrain
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2010 GMC Terrain Weatherstrip Pillar Trim
PartNumber: 23187203
Product Specifications- Location: Driver Side
- Other Names: Weatherstrip Pillar Trim
- Item Dimensions: 36.0 x 9.9 x 5.6 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20864716, 20812679, 20985747
- Part Description: 2010 GMC Terrain Weatherstrip Pillar Trim
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$159.97 MSRP:$241.35You Save: $81.38 (34%)OEM (Genuine) 2010 GMC Terrain Weatherstrip Pillar Trim
PartNumber: 23187204Product Specifications- Location: Passenger Side
- Other Names: Weatherstrip Pillar Trim
- Item Dimensions: 9.8 x 5.4 x 35.0 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20985748, 20864717, 20812680
- Part Description: 2010 GMC Terrain Weatherstrip Pillar Trim
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$159.97 MSRP:$241.35You Save: $81.38 (34%)
FAQ for Pillar Panels Repair
Q: What is the recommended torque when you tighten the quarter window trim finish panel fasteners?
A:
You can tighten the fasteners to 3 Nm (27 lb in).
By Bob
GM Specialist
02/11/2022Q: What should you snap into the liftgate lower trim finish panel when replacing the Liftgate Upper Trim Finish Panel?
A:
You should snap the left and right outboard lower ends of the trim finish panel into the liftgate lower trim finish panel.
By Bob
GM Specialist
02/11/2022Q: What should you remove before replacing the Center Pillar Upper Trim Panel?
A:
You should remove the seat belt from the seat anchor and the center pillar lower trim panel.
By Bob
GM Specialist
02/11/2022Q: What should you remove before replacing the Left Side Body Side Trim Panel?
A:
You should remove the rear compartment front carpet opening cover, the rear end trim finish panel and the rear side door opening floor carpet retainer.
By Bob
GM Specialist
02/11/2022Q: What should you remove before replacing the Center Pillar Lower Trim Panel?
A:
You should remove the rear side door opening floor carpet retainer and the body hinge pillar trim panel.
By Bob
GM Specialist
02/11/2022Q: How do you release the integral retaining clips?
A:
You should grasp and gently pull up on the rear end trim finish panel to release the integral retaining clips.
By Bob
GM Specialist
02/11/2022Q: How many retainer clips does the center pillar lower trim panel have?
A:
The center pillar lower trim panel has a total of 6 retainer clips.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when you tighten the center pillar upper trim panel fastener?
A:
You can tighten the fastener to 2 Nm (18 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when you tighten the cargo tie-down loop fasteners?
A:
You can tighten the fasteners to 13 Nm (9 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How many fasteners does the cargo tie-down loop have?
A:
The cargo tie-down loop has a total of 2 fasteners.
By Bob
GM Specialist
02/11/2022See more FAQs (23)