< Back ×
My Vehicle Change Vehicle
2010 GMC Terrain
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Terrain King Pin Screw
PartNumber: 11570339
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 1.4 x 1.0 x 0.6 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11515720
- Part Description: 2010 GMC Terrain King Pin Screw
Vehicle Fitment- 2010 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$5.05 MSRP:$7.99You Save: $2.94 (37%)
Dorman® OE Solutions Front Wheel Hub Bolt for 2010 GMC Terrain
PartNumber: 917-503Product Specifications- Material: Steel
- Package Contents: 3 Bolts
- UPC: 889245012166
- Part Description: 2010 GMC Terrain OE Solutions Front Wheel Hub Bolt
Vehicle Fitment- 2010 GMC Terrain | All Trims | All Engines
$13.82
OEM (Genuine) 2010 GMC Terrain Hub & Bearing Wheel Stud
PartNumber: 11588811
Product Specifications- Notes: W/O AWD; W/AWD
- Location: Passenger Side; Driver Side
- Other Names: Hub & Bearing Wheel Stud, Wheel Stud
- Item Dimensions: 3.1 x 3.1 x 2.8 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 92171058, 15027048
- Part Description: 2010 GMC Terrain Hub & Bearing Wheel Stud
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$5.78 MSRP:$9.16You Save: $3.38 (37%)
OEM (Genuine) 2010 GMC Terrain Bolt/Screw-Rear Brake Rotor
PartNumber: 96626041
Product Specifications- Notes: W/AWD;W/O AWD
- Location: Driver Side; Passenger Side
- Other Names: Rotor Bolt
- Item Dimensions: 1.2 x 1.1 x 0.6 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Terrain Bolt/Screw-Rear Brake Rotor
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Wheel Hub Bolt Repair
Q: What is the removal procedure for the Wheel Stud?
A:
The procedure is to raise the vehicle, remove the tire and wheel assembly, remove the wheel bearing/hub assembly and press out the wheel stud from the wheel bearing/hub assembly.
By Bob
GM Specialist
01/11/2022Q: How do you install the Wheel Stud?
A:
You can install the wheel stud, place flat washers over the wheel stud being installed, install the wheel nut or a hex head nut, tighten the nut, remove the nut and flat washers, install the wheel bearing/hub assembly to the steering knuckle, install the tire and wheel assembly and lower the vehicle.
By Bob
GM Specialist
01/11/2022