< Back ×
My Vehicle Change Vehicle
2010 GMC Terrain
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2010 GMC Terrain Wiper Arm
PartNumber: 23104651
Product Specifications- Notes: Equinox, Terrain; Left
- Location: Driver Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 26.6 x 3.4 x 4.9 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22873208, 20903479, 25788758
- Part Description: 2010 GMC Terrain Wiper Arm
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$53.25 MSRP:$96.40You Save: $43.15 (45%)OEM (Genuine) 2010 GMC Terrain Wiper Arm
PartNumber: 23104650
Product Specifications- Notes: Equinox, Terrain; Right
- Location: Passenger Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 29.8 x 8.0 x 3.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22873207, 25788778
- Part Description: 2010 GMC Terrain Wiper Arm
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$69.17 MSRP:$125.22You Save: $56.05 (45%)
OEM (Genuine) 2010 GMC Terrain Rear Arm
PartNumber: 84059856
Product Specifications- Notes: Equinox, Terrain
- Other Names: Rear Arm, Wiper Arm
- Item Dimensions: 11.9 x 1.7 x 1.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 23125498, 20933734, 20999458, 25788782
- Part Description: 2010 GMC Terrain Rear Arm
Vehicle Fitment- 2010 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$33.96 MSRP:$61.48You Save: $27.52 (45%)
FAQ for Windshield Wiper Arms Repair
Q: What should you do to access the wiper arm nut?
A:
You should lift the wiper arm nut cover to access the wiper arm nut.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the rear wiper arm nut?
A:
You can tighten the nut to 8 Nm (71 lb in).
By Bob
GM Specialist
01/11/2022Q: What can be used to clean the knurls on the wiper motor pivot shaft?
A:
You can use a soft wire brush.
By Bob
GM Specialist
01/11/2022Q: What tools can be used to disengage the nut cap from the windshield wiper arm?
A:
You can use a small flat-bladed tool.
By Bob
GM Specialist
01/11/2022Q: What should you do when installing the new wiper arm onto the pivot shaft?
A:
You should align the wiper blade with the small line in the windshield's lower blackout area.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Windshield Wiper Arm (Terrain Driver Side)?
A:
You should open and suitably support the hood assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (1)