< Back ×
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Cigarette Lighters
- Department
- Prices
OEM (Genuine) 2010 GMC Yukon Lighter Housing
PartNumber: 25774623
Product Specifications- Notes: Tahoe & Yukon; Chevrolet & Gmc; Tahoe & Yukon W/O Denali; Yukon W/Denali; Center Seat, 2008-14
- Item Dimensions: 2.8 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999477, 12450044, 01999477
- Part Description: 2010 GMC Yukon Lighter Housing
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$6.85 MSRP:$10.32You Save: $3.47 (34%)
OEM (Genuine) 2010 GMC Yukon Receptacle Asm, Cigarette Lighter
PartNumber: 25776667
Product Specifications- Notes: Right Side
- Location: Passenger Side
- Item Dimensions: 2.8 x 1.6 x 1.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12450043
- Part Description: 2010 GMC Yukon Receptacle Asm, Cigarette Lighter
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
$12.25 MSRP:$18.22You Save: $5.97 (33%)
FAQ for Cigarette Lighters Repair
Q: What tools do I need in Cigar Lighter Receptacle or 12-Volt Accessory Power Receptacle replacement?
A:
You need J 42059 Cigar Lighter Socket Remover.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the tire inflator bracket nuts?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
29/10/2022Q: How to install the Cigar Lighter Receptacle or 12-Volt Accessory Power Receptacle?
A:
You can route the connector through the retainer, align the accessory power receptacle retainer to the slot in the opening, install the retainer by pressing into place fully seated, connect the electrical connector to the receptacle, align the tabs on the receptacle to the slots in the retainer, install the accessory power receptacle by pressing into place until fully seated, the accessory power receptacle fuse.
By Bob
GM Specialist
29/10/2022Q: How to remove the Cigar Lighter Receptacle or 12-Volt Accessory Power Receptacle?
A:
You can remove the auxiliary power outlet fuse from the fuse block, the receptacle. If J 42059 tool fails to release the lighter socket from the retainer, you insert a small grinding tool with a cutoff wheel into the socket and remove the plastic latches in the 3 mm (0.11 in) square windows, use the J 42059 as directed above to remove the socket.
By Bob
GM Specialist
29/10/2022Q: How many tire inflator bracket nuts does Accessory AC and DC Power Control Module have?
A:
It has a total of 3 tire inflator bracket nuts.
By Bob
GM Specialist
29/10/2022Q: What tools do I need in using Fused Jumper Wires?
A:
You need J 36169-A Fused Jumper Wire.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the accessory AC and DC power control module nut?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
29/10/2022Q: What should I notice in using Fused Jumper Wires?
A:
Afused jumper may not protect solid-state components from being damaged. The J 36169-A includes small clamp connectors that provide adaptation to most connectors without damage. This fused jumper wire is supplied with a 20-A fuse which may not be suitable for some circuits. You do not use a fuse with a higher rating than the fuse that protects the circuit being tested.
By Bob
GM Specialist
29/10/2022See more FAQs (3)