< Back ×
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2010 GMC Yukon Manifold
PartNumber: 12620308
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 28.4 x 18.3 x 12.8 inches
- Item Weight: 17.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12597598
- Part Description: 2010 GMC Yukon Manifold
Vehicle Fitment- 2010 GMC Yukon | Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$206.56 MSRP:$341.89You Save: $135.33 (40%)OEM (Genuine) 2010 GMC Yukon Manifold
PartNumber: 12638038
Product Specifications- Notes: Tahoe, Yukon, Escalade; 4.8L, 5.3L
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 29.4 x 18.4 x 12.2 inches
- Item Weight: 17.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Yukon Manifold
Vehicle Fitment- 2010 GMC Yukon | SLE, SLT | 8 Cyl 5.3 L FLEX
$166.36 MSRP:$275.35You Save: $108.99 (40%)OEM (Genuine) 2010 GMC Yukon Manifold
PartNumber: 12597600Product Specifications- Notes: Tahoe, Yukon, Escalade; 6.2L
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 29.5 x 19.2 x 13.3 inches
- Item Weight: 17.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Yukon Manifold
Vehicle Fitment- 2010 GMC Yukon | Denali | 8 Cyl 6.2 L FLEX
$176.82 MSRP:$292.66You Save: $115.84 (40%)
FAQ for Intake Manifold Repair
Q: What is the recommended torque for the engine harness retainer nut?
A:
The recommended torque is 5 Nm (44 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Upper Intake Manifold Sight Shield?
A:
You can position the intake manifold sight shield on top of the intake manifold, install the intake manifold sight shield retainer bolts, the intake manifold sight shield tabs into the slots in the retainer, align the intake manifold sight shield grommets with the studs, push down on the intake manifold sight shield over the grommets, seating the intake manifold sight shield, close the hood.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for throttle body bolts/nuts?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Upper Intake Manifold Cover?
A:
You can remove the intake manifold, reposition the brake booster vacuum hose clamp at the intake manifold, the brake booster vacuum hose from the intake manifold nipple, the upper intake manifold cover nut, and the upper intake manifold cover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the intake manifold sight shield retainer bolts?
A:
The recommended torque is 5 Nm (44 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Upper Intake Manifold Sight Shield?
A:
You can open the hood, grasp the front of the intake manifold sight shield, disengage the grommets from the studs, and remove the intake manifold sight shield from the retainer slots, the intake manifold sight shield retainer bolts, and the retainer, if required.
By Bob
GM Specialist
01/11/2022Q: How to install the Upper Intake Manifold Cover?
A:
You can install the upper intake manifold cover, the upper intake manifold cover nut until snug, the brake booster vacuum hose to the intake manifold nipple, and position the brake booster vacuum hose clamp at the intake manifold, the intake manifold.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel rail bolt?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (4)