< Back ×
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Cameras & Driver Safety
- Department
- Prices
OEM (Genuine) 2010 GMC Yukon Reverse Sensor
PartNumber: 15239247
Product Specifications- Notes: Tahoe 2009-14 W/O Ltz, Yukon W/O Denali; Yukon W/Denali, Tahoe 2009-14 W/Ltz; Reverse Sensing System; Tahoe, Yukon, Escalade;Tahoe, Yukon, Escalade; Rear Object
- Other Names: Alarm, Park Sensor, Reverse Sensor, Sensor
- Item Dimensions: 4.8 x 2.3 x 1.9 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19116085
- Part Description: 2010 GMC Yukon Reverse Sensor
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$162.05 MSRP:$244.48You Save: $82.43 (34%)
OEM (Genuine) 2010 GMC Yukon Object Sensor
PartNumber: 20823460
Product Specifications- Notes: Side Object System; Tahoe, Yukon, Escalade; Side Object
- Location: Driver Side; Passenger Side
- Other Names: Module, Object Sensor, Sensor
- Item Dimensions: 5.6 x 4.6 x 1.4 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999430, 25978649, 25910830, 20759899, 01999430
- Part Description: 2010 GMC Yukon Object Sensor
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX
$422.21 MSRP:$636.96You Save: $214.75 (34%)
FAQ for Parking Sensors Repair
Q: How to install the Rear Object Sensor?
A:
You can paint the rear object sensor, ensure the paint does not exceed 6 mils, insert the sensor into the housing, connect the electrical connector to the rear object sensor, and install the rear bumper fascia.
By Bob
GM Specialist
02/11/2022Q: How to remove the Rear Object Sensor?
A:
You can remove the rear bumper fascia, disconnect the electrical from the rear object sensor, lift the locking tabs on the housing and remove the rear object sensor.
By Bob
GM Specialist
02/11/2022Q: How to remove the Rear Object Sensor Housing?
A:
You can remove the rear fascia, disconnect the sensor harness, remove the sensor from the sensor housing, sand/grind sonic weld plastic residue from the fascia, apply structural adhesive epoxy, Lord Fusor(TM) 127EZ or equivalent, to the fascia at the mating surface, install the sensor housing to the fascia, allow adhesive to cure according to manufacturer's directions, install the sensor to the sensor housing, connect the electrical harness, install the rear fascia.
By Bob
GM Specialist
02/11/2022Q: What is the preliminary procedure for the Rear Object Alarm Module removal?
A:
You can remove the front passenger bucket seat.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear object alarm module nuts?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How many rear object alarm module nuts does Rear Object Alarm Module have?
A:
It has a total of 3 rear object alarm module nuts.
By Bob
GM Specialist
01/11/2022See more FAQs (1)