< Back ×
2010 GMC Yukon Thermostat Housing
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Yukon Thermostat Unit
PartNumber: 12587395$9.72 MSRP:$17.58You Save: $7.86 (45%)Product Specifications- Notes: Tahoe, Yukon, Escalade
- Item Dimensions: 4.0 x 4.2 x 4.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Yukon Thermostat Unit
Vehicle Fitment- 2010 GMC Yukon | AT4, Denali, Denali Hybrid, Denali Ultimate, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Product Specifications- Notes: Thermostat Cover
- By-Pass Holes: No
- Material: Cast Aluminum
- Number of Bolt Holes: 2
- Number of Gaskets: 0
- Number of Seals: 0
- OE Exact: Yes
- Outlet Inside Diameter 1: 1.177"
- Outlet Outside Diameter 1: 1.548"
- Type: Coolant Outlet
- UPC: 770075733751
- Part Description: 2010 GMC Yukon Engine Coolant Water Outlet
Vehicle Fitment- 2010 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.0L
Product Specifications- Notes: Outlet
- Gasket or Seal Included: Not Included
- Inlet Dia. IN: 1.205
- Material: Aluminum
- Maximum Height: 2.425
- Meets / Exceeds OEM: Yes
- Mnt Flange Width IN: .378
- Style: w/o Thermostat
- Thermostat Included: Not Included
- UPC: 096361859456
- Part Description: 2010 GMC Yukon Engine Coolant Water Outlet W O Thermostat
Vehicle Fitment- 2010 GMC Yukon | All Trims | All Engines
FAQ for Thermostat Housing Repair
Q: How to install the Engine Coolant Thermostat Housing?
A:
You can install the air cleaner outlet duct, reposition the radiator outlet hose clamp at the water pump inlet, remove the radiator outlet hose from the water pump inlet, the water pump inlet bolts, the water pump inlet from the water pump, the water pump inlet seal, fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the water pump inlet bolts?
A:
The recommended torque is 15 Nm (11 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Coolant Thermostat Housing?
A:
You can drain the cooling system, remove the air cleaner outlet duct, reposition the radiator outlet hose clamp at the water pump inlet, remove the radiator outlet hose from the water pump inlet, the water pump inlet bolts, the water pump inlet from the water pump, the water pump inlet seal.
By Bob
GM Specialist
01/11/2022