< Back ×
My Vehicle Change Vehicle
2011 Buick Enclave
< Back to View All
Relays, Wiring & Connectors
- Department
- Prices
OEM (Genuine) 2011 Buick Enclave Connector
PartNumber: 12191503
Product Specifications- Notes: 2008-2012
- Item Dimensions: 4.2 x 4.3 x 4.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Buick Enclave Connector
Vehicle Fitment- 2011 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$53.76 MSRP:$81.10You Save: $27.34 (34%)
FAQ for Trailer Hitch Connector Repair
Q: Can an all-wheel drive vehicle be dinghy towards the rear?
A:
No, all-wheel drive vehicles can only be dinghy towards the front of the vehicle, not the rear.
By Bob
GM Specialist
14/10/2021Q: How do you prepare a vehicle for dinghy towing?
A:
For dinghy towing, you must position the vehicle into tow and attach the vehicle being towed. Set the parking brake and turn the ignition into an accessory mode so you can shift the transmission into neutral. Remove the 15 amp ECU fuse to prevent the battery from draining. Once it is ready you can put the 15 amp fuse back in and release the parking brake.
By Omar
GM Specialist
14/10/2021Q: Is it necessary to modify the backup lamp circuit if the vehicle is used to tow a trailer with the trailer provisions?
A:
Yes, it is necessary to modify the backup lamp circuit if they are towing a trailer with the trailer provisions.
By Omar
GM Specialist
14/10/2021Q: How do you properly install a trailer hitch?
A:
Install the new trailer hitch with the new hardware and reconnect the trailer wire harness back on. Once the trailer wire is reconnected, you can reconnect the body harnesses and lower the vehicle.
By Omar
GM Specialist
14/10/2021Q: How do you properly remove the trailer hitch?
A:
The vehicle will need to be lifted and the trailer wire harness disconnected. Remove the bolts holding the trailer hitch on and pull the trailer hitch off.
By Bob
GM Specialist
14/10/2021