< Back ×
My Vehicle Change Vehicle
2011 Chevrolet Malibu
< Back to View All
Hoods
- Department
- Brands
- Prices
OEM (Genuine) 2011 Chevrolet Malibu Release Cable
PartNumber: 25868221
Product Specifications- Other Names: Release Cable
- Item Dimensions: 3.7 x 11.6 x 11.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Chevrolet Malibu Release Cable
Vehicle Fitment- 2011 Chevrolet Malibu | Classic LS, Classic LT, Hybrid, LS, LT, LTZ | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$46.83 MSRP:$70.66You Save: $23.83 (34%)
Dorman® OE Solutions Hood Release Cable for 2011 Chevrolet Malibu
PartNumber: 912-055Product Specifications- Handle Included: Yes
- OE Part Number: 25868221, 1350916
- Package Contents: Hood Release Cable
- UPC: 019495258254
- Part Description: 2011 Chevrolet Malibu OE Solutions Hood Release Cable
Vehicle Fitment- 2011 Chevrolet Malibu | All Trims | All Engines
$35.99
FAQ for Hood Release Cable Repair
Q: What parts need to be removed to replace the latch handle?
A:
To replace the latch cable, you will need to remove the driver's knee panel and the battery tray. Once those are removed you will need to disconnect the cable from the handle and remove the cable from the back of the latch which will release the handle so it can be replaced.
By Bob
GM Specialist
06/11/2021Q: What is the easiest way to install a new latch cable?
A:
Insert the new cable through the grommet on the firewall, install it onto the handle and tighten it into place using the 2 fasteners that were removed from the handle during removal. Install the cable on the back side of the latch by pushing it into the retainers. Make sure to tighten the latch bolts to 89 in/lbs. Re-install the knee bolster, side trim panel, and hush panel.
By Omar
GM Specialist
04/11/2021Q: What is the easiest way to remove the latch cable?
A:
You will need to mark the position of the current latch and remove the latch bolts. Continue by removing the cable from the latch itself by squeezing the retainer. Head inside the vehicle and remove the side trim panel, the hush panel, and the knee bolster panel. Remove the 2 bolts holding the handle in place and push the cable out through the grommet located on the firewall of the vehicle.
By Bob
GM Specialist
04/11/2021Q: How many bolts hold the cable handle in place?
A:
There are two bolts holding the handle in place.
By Bob
GM Specialist
04/11/2021