Acura ILX Valve Stem Oil Seal

Known as Honda ILX internationally, the Acura ILX is based on the 9th generation Civic Sedan. It has a good fuel economy and is even better than other luxury sedans. Acura has manufactured plenty of quality vehicles and parts, such as the Acura ILX valve stem oil seal parts. The valve stem oil seal parts maintain the stem and valve guide lubricated to lessen friction. The valve stem oil seal regulates the amount of oil that is used to lubricate the engine by letting a certain amount of oil inside the valve stem.

During the development of ILX, many popular parts have been built. But maintenance and upgrades for Acura ILX valve stem oil seal parts are required after a long time of usage. The ILX valve stem oil seal parts should be replaced every 150,000 miles. The removal process for an ILX valve stem oil seal is as follows. Drain the coolant. Remove the cylinder heads off the engine block. And attach a compressor check tool and used compressed air to hold the valve in place. Then, the compressed air will allow for the removal of the spring and not let the valve drop. Next, place the cylinder on top dead center. Use a valve spring compressor tool to compress the springs, and remove the spring. Finally, pull the valve stem oil seal out of place with some pliers. We offer you a variety of auto parts at a reasonable price online. We put much emphasis on the quality of different parts and accessories.