Audi Q5 Valve Stem Oil Seal

The Audi Q5 is a series of compact luxury crossover SUVs produced by Audi from 2008. The car offers riders remarkable and exciting driving experience. During the development of Q5, many popular valve stem oil seal parts have been built. The valve stem oil seal parts are essential components that control the amount of lubricant oil that goes into the valve stem. Worn-out Q5 valve stem seal parts can lead to an increase in engine emission, friction, and poor fuel efficiency.

Q5 provides a lot of great parts. The valve stem oil seal is one of them. But after a long time, the worn Q5 valve stem oil seal parts might cause huge problems. The removal process for Q5 valve stem oil seal parts is as follows: Drain the coolant, remove the cylinder heads off the engine block, and attach a compressor check tool and used compressed air to hold the valve in place then the compressed air will allow for the removal of the spring and not let the valve drop, next place the cylinder on top dead center, use a valve spring compressor tool to compress the valve springs, and remove the valve spring, finally pull the valve stem oil seal out of place with some pliers. Signs of bad Q5 valve stem oil seal parts include: smoke coming out of the exhaust, engine misfiring, higher oil consumption and poor engine performance. Get helpful parts at a low price online with just a few clicks. We have nearly all types of Q5 parts in our catalogue to give you a better vehicle both inside and out.