BMW 1 Series M Valve Stem Oil Seal

The BMW 1 Series M made its debut at the 2007 Tokyo Auto Show. It also received the "Richard Hammond's Car of the Year 2011" award in Top Gear magazine. Classic parts like the valve stem oil seal parts contribute to the success of 1 Series M. The valve stem oil seal maintains the stem and valve guide lubricated to lessen friction. A worn-out 1 Series M valve stem oil seal can lead to an increase in engine emission, friction, and poor fuel efficiency.

1 Series M offers reliability and practicality to customers. But there will be several problems after valve stem oil seal parts have been used for years. A 1 Series M valve stem oil seal should be replaced every 150,000 miles. The removal process for 1 Series M valve stem oil seal parts is as follows. Drain the coolant. Remove the cylinder head parts from the engine block. And attach a compressor check tool and used compressed air to hold the valve in place. Then the compressed air will allow for the removal of the spring and not let the valve drop. Next place the cylinder parts on top dead center. Use a valve spring compressor tool to compress the valve springs. And remove the valve spring. Finally, pull the 1 Series M valve stem oil seal parts out of place with some pliers. Whatever you need for the 1 Series M car and its upgrades, a modern look, or excellent performance, we will try our best to meet your demands. There are lots of inexpensive and quality parts online on our site.