Fiat 500 Oil Filter

The Fiat 500 made its debut in 1957 and its production was eventually discontinued in 1975. The Fiat 500 is indeed a cost-effective and practical small car. Classic parts like oil filter parts contribute to the success of this car. The Fiat 500 oil filter has the bypass as a second filtration to recycle the oil and keep it free from any dirt or debris. A clogged oil filter can lead to overheating, weak engine performance, and damage to the engine.

Fiat 500 functions quite well in the beginning. However, the old oil filters might lead to poor functions and unpleasant driving experiences after years of usage. Here are the tools needed to change the engine oil or the Fiat 500 oil filter: an oil filter wrench, jack or jack stands, funnels, an oil container, engine oil and drain plug socket or wrench. The oil or the Fiat 500 oil filter replacement is as follows. Firstly, raise the front of the vehicle and secure it properly with jack stands. Then remove the drain plug using the correct size socket and position your oil container under the drain plug bolt location to catch all dirty oil. Remove the oil filter using the proper oil filter wrench. Then reinstall the oil drain plug with a new gasket and torque to spec. And install your new oil filter hand-tight. Fill the engine with the proper capacity and start the engine for a couple of minutes. Finally, recheck the oil level after a couple of minutes of running and top off if needed. Get Fiat 500 helpful parts at a low price with just a few clicks. Our large assortment covers the majority of classic Fiat 500 vehicles. And we are online for you 24/7.