< Back ×
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Dorman® OE Solutions Front Driveshaft for Jeep
PartNumber: 938-127Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 36"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic
- UPC: 037495353168
- Wall Thickness: 0.083"
- Part Description: Jeep OE Solutions Front Driveshaft
$480.27
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-3012Product Specifications- Greasable: No
- Length: 30.312"
- Length (mm): 770
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$425.72
Dorman® OE Solutions Front Driveshaft for Jeep
PartNumber: 938-124Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.12 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 29.625"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic
- UPC: 037495353137
- Wall Thickness: 0.12"
- Part Description: Jeep OE Solutions Front Driveshaft
$412.46
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9315Product Specifications- Greasable: Yes
- Length: 38.062"
- Length (mm): 967
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$409.61
Dorman® OE Solutions Rear Driveshaft for Jeep
PartNumber: 936-075Product Specifications- Drive Shaft Diameter (In): 2.5 In.
- Drive Shaft Wall Thickness (In): 0.065 In.
- Grade Type: Standard
- Greaseable Drive Shaft: No
- Length: 17.625"
- Material: Steel
- Outside Diameter: 2.5"
- Overall Length Adjustable: No
- Transmission Type: Automatic/Manual
- UPC: 037495121309
- Wall Thickness: 0.065"
- Part Description: Jeep OE Solutions Rear Driveshaft
$351.58
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9779Product Specifications- Greasable: Yes
- Length: 29.625"
- Length (mm): 753
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$415.75
Dorman® OE Solutions Front Driveshaft for Jeep
PartNumber: 938-138Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 31.5"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic/Manual
- UPC: 037495353274
- Wall Thickness: 0.083"
- Part Description: Jeep OE Solutions Front Driveshaft
$382.17
Dorman® OE Solutions Rear Driveshaft for Jeep
PartNumber: 936-070Product Specifications- Drive Shaft Diameter (In): 2.5 In.
- Drive Shaft Wall Thickness (In): 0.065 In.
- Grade Type: Standard
- Greaseable Drive Shaft: No
- Length: 16.75"
- Material: Steel
- Outside Diameter: 2.5"
- Overall Length Adjustable: No
- Transmission Type: Automatic/Manual
- UPC: 037495121255
- Wall Thickness: 0.065"
- Part Description: Jeep OE Solutions Rear Driveshaft
$293.79
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9313Product Specifications- Greasable: No
- Length: 32.875"
- Length (mm): 836
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$383.70
Dorman® OE Solutions Front Driveshaft for Jeep
PartNumber: 938-126Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 32.5"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic
- UPC: 037495353151
- Wall Thickness: 0.083"
- Part Description: Jeep OE Solutions Front Driveshaft
$200.61
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9767Product Specifications- Greasable: Yes
- Length: 33.5"
- Length (mm): 851
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$383.70
Dorman® OE Solutions Rear Driveshaft for Jeep
PartNumber: 936-073Product Specifications- Drive Shaft Diameter (In): 2.5 In.
- Drive Shaft Wall Thickness (In): 0.065 In.
- Grade Type: Standard
- Greaseable Drive Shaft: No
- Length: 19.25"
- Material: Steel
- Outside Diameter: 2.5"
- Overall Length Adjustable: No
- Transmission Type: Automatic/Manual
- UPC: 037495121286
- Wall Thickness: 0.065"
- Part Description: Jeep OE Solutions Rear Driveshaft
$254.00
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9781Product Specifications- Greasable: Yes
- Length: 31.875"
- Length (mm): 810
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$378.03
Dorman® OE Solutions Front Driveshaft for Jeep
PartNumber: 938-131Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.12 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 39.375"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic/Manual
- UPC: 037495353205
- Wall Thickness: 0.12"
- Part Description: Jeep OE Solutions Front Driveshaft
$244.76
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9324Product Specifications- Greasable: No
- Length: 27.875"
- Length (mm): 708
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$382.72
Dorman® OE Solutions Front Driveshaft for Jeep
PartNumber: 938-137Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 35.125"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic/Manual
- UPC: 037495353267
- Wall Thickness: 0.083"
- Part Description: Jeep OE Solutions Front Driveshaft
$243.27
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9326Product Specifications- Greasable: No
- Length: 30.375"
- Length (mm): 771
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$382.72
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9316Product Specifications- Greasable: Yes
- Length: 39.437"
- Length (mm): 1002
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$370.45
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9770Product Specifications- Greasable: Yes
- Length: 31.125"
- Length (mm): 790
- Material: Steel
- Measurement Method: Measurement is taken from the base of the bolt on the outer plate of the CV Joint to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$340.40
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9314Product Specifications- Greasable: No
- Length: 31.375"
- Length (mm): 796
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$334.39
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-3004Product Specifications- Greasable: No
- Length: 34"
- Length (mm): 864
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$337.08
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9776Product Specifications- Greasable: Yes
- Length: 30.5"
- Length (mm): 774
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$300.99
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-3005Product Specifications- Greasable: Yes
- Length: 30.375"
- Length (mm): 771
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$275.61
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9765Product Specifications- Greasable: Yes
- Length: 38.25"
- Length (mm): 972
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$275.03
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9773Product Specifications- Greasable: Yes
- Length: 32.375"
- Length (mm): 823
- Material: Steel
- Measurement Method: Measurement is taken from the base of the bolt on the outer plate of the CV Joint to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$261.29
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-3018Product Specifications- E-Waste: No
- Greasable: Yes
- Length: 30.5"
- Length (mm): 774
- Material: Steel
- Measurement Method: Flange face on one end of the prop shaft to the flange face on the oppsite end of the collapsed prop shaft.
- Outside Diameter: 1.75"
- Tubing Outer Diameter (mm): 44.00
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$241.91
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9668Product Specifications- Greasable: Yes
- Length: 30.687"
- Length (mm): 779,462
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$238.96
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-3007Product Specifications- Greasable: No
- Length: 33.625"
- Length (mm): 854
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$235.39
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-3003Product Specifications- Greasable: No
- Length: 26.5"
- Length (mm): 673
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$232.76
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for Jeep
PartNumber: 65-9766Product Specifications- Greasable: Yes
- Length: 39.187"
- Length (mm): 995
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Remanufactured Driveshaft/ Prop Shaft
$231.64
1-30 of 733 Results
< Previous
12345
Next >About Jeep Driveshaft
Jeep is not only an automobile manufacturer but also a registered trademark. This brand has been a leader in defining the sport utility car in the automotive sector. Jeep has built many popular driveshaft parts over the years. Due to the space and distance of some vehicles, there is a need for two driveshaft parts.
Jeep provides a large selection of high-performance parts. But after a long time, the worn Jeep driveshaft parts might cause huge problems. A Jeep driveshaft is a long propeller. It is designed to transmit torque from the output shaft of the transmission to the rear differential. However, a bad Jeep driveshaft can cause clicking, grinding, and difficult handling of the car at certain speeds. The driveshaft has the following important parts: flanges, slip yoke/tube yoke, end yoke, midship shaft, universal joint, center bearing, and tube. Prompt services are given to you with great hospitality online. We put much emphasis on the quality of different parts and accessories.