< Back ×
1988 Nissan Stanza Alternators, Batteries & Starters
My Vehicle Change Vehicle
1988 Nissan Stanza
$85.35Product Specifications- Notes: w/AC; 70 Amps
- Amp Rating: 70
- Fan Type: Internal
- New or Remanufactured: Remanufactured
- OE Manufacturer: Mitsubishi
- One Wire Capable: NO
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 4
- Pulley Included: Yes
- Pulley Outside Diameter: 62
- Regulator Type: Internal
- Rotation Direction: Clockwise
- UPC: 090244148743
- Voltage [V]: 12
- Part Description: 1988 Nissan Stanza Remanufactured Alternator
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
$27.64Product Specifications- Notes: w/ Mitsubishi;w/Mitsubishi;w/ Hitachi;w/Hitachi
- Inner Diameter: 0.6693"
- Outer Diameter: 1.8504"
- UPC: 085311069526
- Width: 0.5512"
- Part Description: 1988 Nissan Stanza Alternator Bearing
Vehicle Fitment- 1988 Nissan Stanza | All Trims | All Engines
$42.98Product Specifications- Design: Permanent Magnet Gear Reduction
- Manufacturer: Mitsubishi
- Power Rating: 1.4 kW
- Rotation: Clockwise
- Teeth: 10
- Volts: 12 V
- Part Description: 1988 Nissan Stanza Starter Remanufactured
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
$13.35Product Specifications- Notes: w/Hitachi Alternator; w/50, 60 Amp Alternator
- Bore (Inch): 0.591
- Bore (mm): 15.000
- Design: Single Row Radial
- Inner Race Bore (Inch): 0.591
- Inner Race Bore (mm): 15.000
- Inner Race Radius (Inch): 0.024
- Inner Race Radius (mm): 0.610
- Inner Race Width (Inch): 0.433
- Inner Race Width (mm): 11.000
- Outer Race Outside Diameter (Inch): 1.378
- Outer Race Outside Diameter (mm): 35.000
- Outer Race Radius (Inch): 0.024
- Outer Race Radius (mm): 0.610
- Outer Race Width (Inch): 0.433
- Outer Race Width (mm): 11.000
- Outside Diameter (Inch): 1.378
- Outside Diameter (mm): 35.000
- Series: 200
- Type: A-3
- Width (Inch): 0.433
- Width (mm): 11.000
- Part Description: 1988 Nissan Stanza Generator Commutator End Bearing
Vehicle Fitment- 1988 Nissan Stanza | All Trims | All Engines
$70.46Product Specifications- Notes: 70 Amps
- Amp Rating: 70
- Fan Type: External
- New or Remanufactured: Remanufactured
- OE Manufacturer: Hitachi
- One Wire Capable: NO
- Part Status: Superseded to 14665
- Pulley Belt Type: V-Belt
- Pulley Groove Quantity: 1
- Pulley Included: Yes
- Pulley Outside Diameter: 74
- Regulator Type: Internal
- Rotation Direction: Clockwise
- Voltage [V]: 10
- Part Description: 1988 Nissan Stanza Remanufactured Alternator
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
$9.97 MSRP:$13.60You Save: $3.63 (27%)Product Specifications- Notes: Sedan Jan 1986 - 89,;Van/Wagon, Rod
- Item Dimensions: 8.1 x 0.8 x 0.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24425-89902, 24425-89906, 24423-J0100, 24425-0B000
- Part Description: 1988 Nissan Stanza Rod-Battery Fix
Vehicle Fitment- 1988 Nissan Stanza | GXE, SE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$74.48Product Specifications- Notes: w/Hitachi Starter
- Design: Offset Gear Reduction
- Manufacturer: Hitachi
- Power Rating: 1.2 kW
- Rotation: Clockwise
- Teeth: 8
- Volts: 12 V
- Part Description: 1988 Nissan Stanza Starter Remanufactured
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
$74.01Product Specifications- Notes: w/Hitachi Starter
- Mounting Bolt Hole Quantity: 2
- New or Remanufactured: Remanufactured
- Nose Cone Type: Open Nose
- OE Manufacturer: Hitachi, Mitsubishi
- Power Rating (kW): 1
- Rotation Direction: Clockwise
- Unit Design: Wound Field Offset Gear Reduction
- UPC: 090244168727
- Voltage [V]: 12
- Part Description: 1988 Nissan Stanza Remanufactured Starter
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
$57.40Product Specifications- Notes: wo/ AC
- Amps: 70 Amps
- Clock: 11:30
- Fan: Internal
- Manufacturer: Hitachi/Mitsubishi
- Pulley: 4 Groove/6Groove Serpentine
- Regulator: Internal
- Rotation: Clockwise
- Volts: 12 Volts
- Part Description: 1988 Nissan Stanza Alternator Remanufactured
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
$99.75Product Specifications- Notes: wo/ AC; 70 Amps
- Amp Rating: 70
- Fan Type: Internal
- New or Remanufactured: Remanufactured
- OE Manufacturer: Mitsubishi
- One Wire Capable: NO
- Pulley Belt Type: Serpentine
- Pulley Included: Yes
- Pulley Outside Diameter: 62
- Regulator Type: Internal
- Rotation Direction: Clockwise
- UPC: 090244148750
- Voltage [V]: 12
- Part Description: 1988 Nissan Stanza Remanufactured Alternator
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
$23.21Product Specifications- Notes: w/Hitachi Alternator; w/70, 80 Amp Alternator
- Type: A-5
- Part Description: 1988 Nissan Stanza Generator Commutator End Bearing
Vehicle Fitment- 1988 Nissan Stanza | All Trims | All Engines
- $9.97 MSRP:
$13.60You Save: $3.63 (27%)Product Specifications- Notes: Sedan Jan 1986 - 89,;Van/Wagon, Rod
- Item Dimensions: 8.1 x 0.8 x 0.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24425-89902, 24425-89906, 24423-J0100, 24425-0B000
- Part Description: 1988 Nissan Stanza Rod-Battery Fix
Vehicle Fitment- 1988 Nissan Stanza | GXE, SE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- $9.97 MSRP:
$13.60You Save: $3.63 (27%)Product Specifications- Notes: Sedan Jan 1986 - 89,;Van/Wagon, Rod
- Item Dimensions: 8.1 x 0.8 x 0.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24425-89902, 24425-89906, 24423-J0100, 24425-0B000
- Part Description: 1988 Nissan Stanza Rod-Battery Fix
Vehicle Fitment- 1988 Nissan Stanza | GXE, SE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$21.52 MSRP:$29.42You Save: $7.90 (27%)Product Specifications- Notes: Sedan Jan 1986 - 89,;Van/Wagon,
- Item Dimensions: 8.1 x 2.4 x 0.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Nissan Stanza Battery Frame
Vehicle Fitment- 1988 Nissan Stanza | E, GXE, SE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- $21.52 MSRP:
$29.42You Save: $7.90 (27%)Product Specifications- Notes: Sedan Jan 1986 - 89,;Van/Wagon,
- Item Dimensions: 8.1 x 2.4 x 0.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Nissan Stanza Battery Frame
Vehicle Fitment- 1988 Nissan Stanza | E, GXE, SE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$232.45 MSRP:$328.30You Save: $95.85 (30%)Limited AvailabilityProduct Specifications- Notes: Pulsar; Fuel Inj; W/Se; Hitachi; W/AC;Pulsar; Fuel Inj; W/Se; Mitsubishi; W/AC
- Other Names: Alternator
- Item Dimensions: 8.9 x 7.2 x 7.2 inches
- Item Weight: 11.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 23100-D4405R
- Part Description: 1988 Nissan Stanza Reman Alternator Assembly
Vehicle Fitment- 1988 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- $52.60 MSRP:
$71.87You Save: $19.27 (27%)Limited AvailabilityProduct Specifications- Notes: Sedan Jan 1986 - 89,;Van/Wagon,
- Replaces: 99996-00089, 99996-00090
- Part Description: 1988 Nissan Stanza Group 35F BATTE
Vehicle Fitment- 1988 Nissan Stanza | E, GXE, SE, XE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Switch-to-Starter 4GA 24in; Switch-to-Starter;4 GA 24in. Red
- Color: RED
- Conductor Material: COPPER
- Gauge: 4
- Length: 24 IN
- Lug Hole Size: 3/8 IN
- Nominal OD: 0.360
- UPC: 083996002883
- Part Description: 1988 Nissan Stanza Switch-to-Starter Battery Cable
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
Denso® Alternator for 1988 Nissan Stanza
PartNumber: 210-4116Product Specifications- Notes: 70 Amp; w/AC, Mitsubishi Unit; OE Equivalent
- Amperage Rating: 70
- Family: MITSUBISHI OE
- Fan Type: Internal
- New or Remanufactured: Remanufactured
- Plug Type: 300
- Regulator Type: Internal
- Rotation Direction: Clockwise
- UPC: 042511082625
- Voltage: 12.0
- Part Description: 1988 Nissan Stanza Alternator
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: 1.4 kW; OE Equivalent
- Family: MITSUBISHI OE
- Internet Product Code (IPC): FF07517C426
- Item Grade: Standard Replacement
- Item has MSDS (SDS): N
- MFG Brand Name: DENSO Auto Parts
- MFG Model # (Series): 2804300
- MFG Name: DENSO
- New or Remanufactured: Remanufactured
- Over-Crank Protection: Non-Applicable
- Package Contents: Starter and installation instruction sheet
- Power Rating: 1.40
- Product Condition: Remanufactured
- Rated Kilowatts (kW): 0.7
- Starter Mounting Configuration: Bolt on
- Starter Rotation: Clockwise
- Starter Shims Included: No
- Starter Type: PMGR (Permanent Magnet Gear Reduction)
- Supplier Company Name: DENSO
- UPC: 042511172760
- Vehicle System Voltage: 12V
- Voltage: 12.0
- Part Description: 1988 Nissan Stanza Remanufactured Starter
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: Top Post Terminal;Replacement Terminal Top Post; Terminal
- Color: SILVER
- Polarity: UNIVERSAL
- Terminal Type: TOP (UNIV)
- UPC: 083996003507
- Part Description: 1988 Nissan Stanza Universal Battery Post Terminal
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Type: A-2
- Part Description: 1988 Nissan Stanza Generator Commutator End Ball Bearing
Vehicle Fitment- 1988 Nissan Stanza | All Trims | All Engines
- Product Specifications
- Notes: Pulsar; Fuel Inj; W/O Se;Sentra; Gas; Hitachi
- Other Names: Alternator
- Item Dimensions: 8.8 x 7.6 x 7.3 inches
- Item Weight: 13.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 23100-53A00R, 23100-53A00
- Part Description: 1988 Nissan Stanza Reman Alternator Assembly
Vehicle Fitment- 1988 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: 70 Amp; w/o AC, Mitsubishi Unit; OE Equivalent
- Amperage Rating: 70
- Family: MITSUBISHI OE
- Fan Type: Internal
- New or Remanufactured: Remanufactured
- Plug Type: 300
- Regulator Type: Internal
- Rotation Direction: Clockwise
- UPC: 042511172739
- Voltage: 12.0
- Part Description: 1988 Nissan Stanza Remanufactured First Time Fit Alternator
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Notes: w/Mitsubishi Alternator; w/70 Amp Alternator
- Type: A-5
- Part Description: 1988 Nissan Stanza Alternator Bearings
Vehicle Fitment- 1988 Nissan Stanza | All Trims | All Engines
Product Specifications- Notes: Top Post 4 GA 38in. Red 1 Lead;Top Post Red 4 GA 38in. w/1 Lead; Positive
- Color: RED
- Gauge: 4
- Leads: 1
- Length: 38 IN
- Nominal OD: 0.38
- Polarity: UNIVERSAL
- Terminal Type: TOP (UNIV)
- UPC: 083996002975
- Part Description: 1988 Nissan Stanza Post Terminal Battery Cable
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
- Product Specifications
- Notes: Top Post Red 4 GA 43in.w/1 Lead; Positive;Top Post 4 GA 43in. Red 1 Lead
- Color: RED
- Gauge: 4
- Leads: 1
- Length: 43 IN
- Nominal OD: 0.38
- Polarity: UNIVERSAL
- Terminal Type: TOP (UNIV)
- UPC: 083996002982
- Part Description: 1988 Nissan Stanza Post Terminal Battery Cable
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
Product Specifications- Amps: 70 Amps
- Clock: 9:30
- Fan: External
- Manufacturer: Hitachi
- Pulley: 1 Groove V-belt
- Regulator: Internal
- Rotation: Clockwise
- Volts: 12 Volts
- Part Description: 1988 Nissan Stanza Alternator Remanufactured
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
- Product Specifications
- Notes: Pulsar; Fuel Inj; W/Se; Hitachi; W/O AC
- Other Names: Alternator
- Item Dimensions: 8.5 x 6.6 x 5.5 inches
- Item Weight: 12.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 23100-D4400
- Part Description: 1988 Nissan Stanza Reman Alternator Assembly
Vehicle Fitment- 1988 Nissan Stanza | E, GXE, XE | 4 Cyl 2.0 L GAS
Product Specifications- Notes: Two Cables Reqd. Add 24in. Switch-To-Starter Cable To Complete Set; Top Post Black 4 GA 20in.
- Color: BLACK
- Conductor Material: COPPER
- Gauge: 4
- Length: 20 IN
- Lug Hole Size: 3/8 IN
- Nominal OD: 0.38
- Polarity: UNIVERSAL
- Terminal Type: TOP (UNIV)
- UPC: 083996008014
- Part Description: 1988 Nissan Stanza Post Terminal Battery Cable
Vehicle Fitment- 1988 Nissan Stanza | All Trims | 4 Cyl 2.0L
1-30 of 88 Results
< Previous
123
Next >