< Back ×
1991 Jeep Comanche Driveline, Axles & 4WD
My Vehicle Change Vehicle
1991 Jeep Comanche
$234.08Product Specifications- Notes: Dana 44 Axle
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Material: Carbon Steel
- OE Part Number: 4882350, 5083676AA, 83504960
- Spline Quantity: 30 Spline
- UPC: 019495452935
- Wheel Lug Quantity: 5
- Part Description: 1991 Jeep Comanche OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$433.22Product Specifications- Notes: with 242 Transfer Case;with Dana Model 30 Axle;with 30-1/2" (774 mm) Long Driveshaft;with 231 Transfer Case;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 30.5"
- Length (mm): 774
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1991 Jeep Comanche Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1991 Jeep Comanche | All Trims | 6 Cyl 4.0L
$236.10Product Specifications- Notes: Dana 44 Axle
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.24"
- Material: Carbon Steel
- OE Part Number: 4882351, 5083677AA, 83504961
- Spline Quantity: 30 Spline
- UPC: 019495452942
- Wheel Lug Quantity: 5
- Part Description: 1991 Jeep Comanche OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$166.64Product Specifications- Notes: Master Kit; Dana 35 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487122
- Width: 2.50"
- Part Description: 1991 Jeep Comanche Rear Master Differential Rebuild Kit
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$316.49Product Specifications- Notes: with 30-11/16" (779 mm) Long Driveshaft;with 231 Transfer Case;with Dana Model 30 Axle;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 30.687"
- Length (mm): 779,462
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1991 Jeep Comanche Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1991 Jeep Comanche | All Trims | 4 Cyl 2.5L
$42.89 MSRP:$63.90You Save: $21.01 (33%)Product Specifications- Notes: Jeep; Chrysler Axle; Outer; Bearing
- Item Dimensions: 1.2 x 2.6 x 2.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Jeep Comanche Bearing-Drive Pinion
Vehicle Fitment- 1991 Jeep Comanche | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
$64.66Product Specifications- Outer Yoke Dimension: 3.875"
- UPC: 083286607828
- Part Description: 1991 Jeep Comanche Double Cardan CV Centering Yoke
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$21.86Product Specifications- Notes: w/New Process 242J Transfer Case; 2Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 1991 Jeep Comanche Driveshaft Center Support Bearing
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$124.84Product Specifications- Notes: Standard Kit; Dana 44 Axle;Std; Dana 44 Axle:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470773
- Width: 2.50"
- Part Description: 1991 Jeep Comanche Front Differential Rebuild Kit
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$213.26Product Specifications- Notes: Dana 35 Axle
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.78"
- Material: Carbon Steel
- OE Part Number: 5252949
- Spline Quantity: 27 Spline
- UPC: 019495045878
- Wheel Lug Quantity: 5
- Part Description: 1991 Jeep Comanche OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$20.58Product Specifications- Notes: w/Spicer 35C Axle; w/7.59in Ring Gear
- Part Description: 1991 Jeep Comanche Front Inner Differential Pinion Bearing
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
- $55.99 MSRP:
$84.15You Save: $28.16 (34%)Product Specifications- Notes: Jeep; Chrysler Axle; Outer; Cup
- Item Dimensions: 1.6 x 3.0 x 3.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Jeep Comanche Cup-Drive PINION
Vehicle Fitment- 1991 Jeep Comanche | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
$191.95Product Specifications- Notes: w/4.10 Axle Ratio; Dana 30 Axle
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- OE Part Number: 83502353
- UPC: 019495515722
- Part Description: 1991 Jeep Comanche OE Solutions Front Differential Ring And Pinion
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$111.98Product Specifications- Notes: Std; Dana 35 Axle;Standard Kit; Dana 35 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470728
- Width: 2.50"
- Part Description: 1991 Jeep Comanche Rear Differential Rebuild Kit
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$33.36Product Specifications- Notes: Spicer 44 Axle
- Cone ID: 1.563"
- Outside Diameter: 2.876"
- UPC: 085311058643
- Width: 0.766"
- Part Description: 1991 Jeep Comanche Rear Axle Shaft Bearing Kit
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$12.30Product Specifications- Notes: w/Spicer 30-AF Axle; w/7.125in Ring Gear;w/Spicer 35C Axle; w/7.59in Ring Gear
- Part Description: 1991 Jeep Comanche Differential Bearing
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$13.65Product Specifications- Notes: Perf Grade; Sealed Unit
- Bearing Cap Diameter: 1.063"
- Lock Ring Type: Internal
- Lubrication Method: Sealed Unit
- UPC: 083286502604
- Part Description: 1991 Jeep Comanche Grade Performance™ Front U-Joint
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$116.54 MSRP:$176.00You Save: $59.46 (34%)Product Specifications- Notes: Jeep; Jeep; Dana Model 35 Axle; Package
- Other Names: Case Bearing, Side Bearings
- Item Dimensions: 1.1 x 3.4 x 3.3 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Jeep Comanche Bearing-Differential Side
Vehicle Fitment- 1991 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
$211.29Product Specifications- Notes: Dana 35 Axle
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.78"
- Material: Carbon Steel
- OE Part Number: 5252948
- Spline Quantity: 27 Spline
- UPC: 019495065258
- Wheel Lug Quantity: 5
- Part Description: 1991 Jeep Comanche OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$6.48Product Specifications- Notes: 8.25" Ring Gear; FAG Global# FC67148.5; .830" Wide Brg.
- UPC: 670774196836
- Part Description: 1991 Jeep Comanche Rear Axle Shaft Bearing
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$22.61Product Specifications- Notes: 35 & Spicer 35 Axles
- Cone ID: 1.406"
- Outside Diameter: 2.844"
- UPC: 085311256551
- Width: 1.218"
- Part Description: 1991 Jeep Comanche Inner Axle Shaft Bearing Kit
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$193.27Product Specifications- Notes: Dana 35 Axle; w/4.56 Axle Ratio; Carrier Break 3.31/3.54
- Gear Ratio: 4.56
- Item Grade: Standard Replacement
- OE Part Number: 83504377
- UPC: 019495515616
- Part Description: 1991 Jeep Comanche OE Solutions Front Differential Ring And Pinion
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$6.17Product Specifications- Notes: w/Spicer 35C Axle; w/7.59in Ring Gear;w/Spicer 30-AF Axle; w/7.125in Ring Gear
- Part Description: 1991 Jeep Comanche Differential Carrier Race
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
- $27.71 MSRP:
$40.00You Save: $12.29 (31%)Product Specifications- Notes: 2WD;4WD
- Location: Driver Side; Passenger Side
- Item Dimensions: 2.5 x 2.5 x 2.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Jeep Comanche BUSHING-Control Arm
Vehicle Fitment- 1991 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
$13.41Product Specifications- Notes: Std Grade; Grease Fitting in Bearing Cap
- Bearing Cap Diameter Axis 1 (in): 1.0600
- Bearing Cap Diameter Axis 2 (in): 1.0600
- Bearing Cap Finish: Machined
- Greasable: Yes
- Grease Zerks Included: Yes
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Inside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (ISR) Inside Snap Ring Style
- UPC: 083286110564
- Part Description: 1991 Jeep Comanche Universal Joint
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
Dorman® OE Solution Front Ring And Pinion Bearing Installation Kit for 1991 Jeep Comanche
PartNumber: 697-109$187.34Product Specifications- Notes: Std Design; Dana 44 Axle
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495105190
- Part Description: 1991 Jeep Comanche OE Solution Front Ring And Pinion Bearing Installation Kit
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$16.83Product Specifications- Notes: w/4 W/D:
- Cone ID: 1.375"
- Cone Length: 1"
- Cone Radius: 0.09"
- OE Part Number: 8970844670, 9036634019, 0019816905, C0DW4625A, 3156066, XW3706, 1549628, 926803, C0WD4625A, COWD4625A, 79192186, 5086690AA, 90368-34049, 9759HM88649, 33 12 1 468 894, 1-206-573, 2070079, 8729113, N058570, C0WD4630A, 2070070, 1L2Z1201AA, 1-204-304, 1458HM8
- UPC: 085311056199
- Width: 1"
- Part Description: 1991 Jeep Comanche Front Outer Axle Shaft Bearing
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$17.20Product Specifications- Notes: Brute Force Greaseable
- Inside Lock-Up 1: 2.188"
- Outer Diameter: 1.063"
- UPC: 085311099776
- Part Description: 1991 Jeep Comanche Greaseable U Joint
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 1991 Jeep Comanche Grade Performance™ Rear U-Joint
Vehicle Fitment- 1991 Jeep Comanche | All Trims | All Engines
- $80.02 MSRP:
$121.00You Save: $40.98 (34%)Product Specifications- Notes: Jeep; Chrysler Axle; Bearing
- Other Names: Bearing, Case Bearing, Side Bearings, Side Gear
- Item Dimensions: 1.2 x 4.5 x 4.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Jeep Comanche Bearing-Differential
Vehicle Fitment- 1991 Jeep Comanche | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
1-30 of 184 Results
< Previous
12345
Next >