< Back ×
1994 GMC Sonoma Driveline, Axles & 4WD
My Vehicle Change Vehicle
1994 GMC Sonoma
$264.98Product Specifications- Notes: 8.5" Ring Gear; 8.625" Ring Gear; w/4.10 Axle Ratio
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- OE Part Number: 26009753, 3988515
- UPC: 019495105428
- Part Description: 1994 GMC Sonoma OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$31.94Product Specifications- Notes: BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: SQUARE FRAME;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- OE Part Number: 5014097AA
- Shape: Square
- UPC: 081106060792
- Part Description: 1994 GMC Sonoma Driveshaft Center Support Bearing
Vehicle Fitment- 1994 GMC Sonoma | All Trims | 4 Cyl 2.2L
- 1994 GMC Sonoma | All Trims | 6 Cyl 4.3L
$338.03Product Specifications- Notes: with Propshaft Code CLD;with 31" (787 mm) Long Driveshaft;Measurement is taken from end of input shaft to center of U-Joint
- Greasable: No
- Length: 31"
- Length (mm): 787,4
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1994 GMC Sonoma Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$249.80Product Specifications- Notes: 8.5" Ring Gear; w/3.73 Axle Ratio; 8.625" Ring Gear
- Gear Ratio: 3.73
- Item Grade: Standard Replacement
- OE Part Number: 12471280, 12479316, 1259441, 26035826, 26037712
- UPC: 019495105404
- Part Description: 1994 GMC Sonoma OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$12.74Product Specifications- Notes: COMPAT w/SPICER SERIES: 1280, 1310, 1410; BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;COMPLETE MOUNT;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- Shape: Round
- UPC: 081106060563
- Part Description: 1994 GMC Sonoma Driveshaft Center Support Bearing
Vehicle Fitment- 1994 GMC Sonoma | All Trims | 4 Cyl 2.2L
- 1994 GMC Sonoma | All Trims | 6 Cyl 4.3L
OEM (Genuine) 1994 GMC Sonoma Joint Kit-Front Axle Propeller Shaft Front Universal
PartNumber: 23104840$50.12 MSRP:$87.24You Save: $37.12 (43%)Product Specifications- Notes: S-Series
- Other Names: Universal Joints
- Item Dimensions: 5.8 x 5.3 x 2.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26042371, 12471502, 12479126
- Part Description: 1994 GMC Sonoma Joint Kit-Front Axle Propeller Shaft Front Universal
Vehicle Fitment- 1994 GMC Sonoma | Base, GT, SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$92.51Product Specifications- Notes: 1.375" I.D.; 2 Piece Drive Sh.
- Bolt Hole Center: 6.614"
- Inside Diameter: 1.377"
- Outside Diameter: 4.299"
- UPC: 085311391689
- Width: 1.889"
- Part Description: 1994 GMC Sonoma Driveshaft Center Support Bearing
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$97.72Product Specifications- Notes: with High Wider Package (ZR2);Option Codes are on the Service Parts Identification sticker
- ABS Ring Included: No
- Axle Nut Locking Type: Self Lock
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 21 3/8"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 27
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 36mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M24 x 2.0
- Part Description: 1994 GMC Sonoma Remanufactured CV Axle Assembly
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$240.53Product Specifications- Notes: 8.5" Ring Gear; w/3.42 Axle Ratio; 8.625" Ring Gear
- Gear Ratio: 3.42
- Item Grade: Standard Replacement
- OE Part Number: 1258710, 26037720
- UPC: 019495105398
- Part Description: 1994 GMC Sonoma OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$9.96Product Specifications- Notes: with 8.500in Ring Gear;10 Bolt;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 10
- Thickness (in): 0.032"
- UPC: 023913682606
- Part Description: 1994 GMC Sonoma Axle Housing Cover Gasket
Vehicle Fitment- 1994 GMC Sonoma | All Trims | 4 Cyl 2.2L
- 1994 GMC Sonoma | All Trims | 6 Cyl 4.3L
$217.97Product Specifications- Notes: 8.5" Ring Gear; 8.625" Ring Gear; w/3.23 Axle Ratio
- Gear Ratio: 3.23
- Item Grade: Standard Replacement
- UPC: 037495175821
- Part Description: 1994 GMC Sonoma Oe Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
OEM (Genuine) 1994 GMC Sonoma Joint Kit-Front Axle Propeller Shaft Front Universal
PartNumber: 23104840$50.12 MSRP:$87.24You Save: $37.12 (43%)Product Specifications- Notes: S-Series
- Other Names: Universal Joints
- Item Dimensions: 5.8 x 5.3 x 2.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26042371, 12471502, 12479126
- Part Description: 1994 GMC Sonoma Joint Kit-Front Axle Propeller Shaft Front Universal
Vehicle Fitment- 1994 GMC Sonoma | Base, GT, SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$196.85Product Specifications- Notes: 7.625" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 26.59"
- Material: Carbon Steel
- OE Part Number: 26009534
- Spline Quantity: 28 Spline
- UPC: 019495146704
- Wheel Lug Quantity: 5
- Part Description: 1994 GMC Sonoma OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$25.54Product Specifications- Notes: Std Grade; Grease Fitting in Cross; Press-On Slip Yoke Seal
- Bearing Cap Diameter Axis 1 (in): 1.0600
- Bearing Cap Diameter Axis 2 (in): 1.0600
- Bearing Cap Finish: Machined
- Greasable: Yes
- Grease Zerks Included: Yes
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Inside/Outside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (ISR) Inside Snap Ring Style/(OSR) Outside Snap Ring Style
- UPC: 083286109261
- Part Description: 1994 GMC Sonoma Grade Standard U-Joint
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$208.75Product Specifications- Notes: 8.5" Ring Gear; 8.625" Ring Gear; w/2.73 Axle Ratio
- Gear Ratio: 2.73
- Item Grade: Standard Replacement
- UPC: 037495175845
- Part Description: 1994 GMC Sonoma OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$31.99Product Specifications- Notes: Incls Bearing & Support; w/1.378in Bearing ID; w/35mm Bearing ID; Slip Yoke Style; w/Spicer 1280,1310,1330,1410 U-Joint(s)
- Bolt Holes (Inch): 6.6240
- Centerline Height: 2.28"
- Inside Diameter: 1.378"
- Outside Diameter: 2.834"
- Type: 2
- Width: 6.624"
- Part Description: 1994 GMC Sonoma Driveshaft Center Support Bearing
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$167.54Product Specifications- Notes: Propeller Shaft
- Additional Contents: 2 Snap Rings, Boot Clamp
- Bolt Hole Quantity: 0
- Color/Finish: Natural
- Grease Included: Yes
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Steel
- Spline Count: 0
- Spline Length (In): 7"
- UPC: 019495272373
- Part Description: 1994 GMC Sonoma OE Solutions Front Propeller Shaft Cv Joint Kit
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$14.61 MSRP:$24.17You Save: $9.56 (40%)Product Specifications- Notes: S-Series
- Other Names: Cover Gasket, Gasket, Housing Cover Gasket
- Item Dimensions: 24.5 x 12.5 x 3.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26016662, 26066456
- Part Description: 1994 GMC Sonoma Housing Cover Gasket
Vehicle Fitment- 1994 GMC Sonoma | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; Press-On Slip Yoke Seal
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 1994 GMC Sonoma Grade Performance™ Rear U-Joint
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$21.86Product Specifications- Notes: w/New Process 233C Transfer Case; 2Spd; w/Part Time 4WD; w/32 Splines;w/New Process 231C Transfer Case; 2Spd; w/Part Time 4WD; w/32 Splines
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 1994 GMC Sonoma Driveshaft Center Support Bearing
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$145.30Product Specifications- Notes: 28 Spline; 7.625" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.03"
- Material: Carbon Steel
- OE Part Number: 26013882
- Spline Quantity: 28 Spline
- UPC: 019495045748
- Wheel Lug Quantity: 5
- Part Description: 1994 GMC Sonoma OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$29.39Product Specifications- Notes: Repair; 7.625" Ring Gear & Stamping Code K;Repair; 7.625" Ring Gear & Stamping Code C
- Inside Diameter: 1.399"
- Outside Diameter: 2.294"
- UPC: 085311066280
- Width: 1.211"
- Part Description: 1994 GMC Sonoma Front Driver Side Axle Shaft Bearing Assembly
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$28.59Product Specifications- Notes: Bearing Only; w/o 2 Piece Drive Sh.
- Inside Diameter: 1.378"
- Outside Diameter: 2.834"
- UPC: 085311067119
- Width: 0.984"
- Part Description: 1994 GMC Sonoma Driveshaft Center Support Bearing
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
- $18.22 MSRP:
$34.10You Save: $15.88 (47%)Product Specifications- Notes: S-Series
- Other Names: Pinion Seal
- Item Dimensions: 3.8 x 3.8 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1994 GMC Sonoma Pinion Seal
Vehicle Fitment- 1994 GMC Sonoma | Base, GT, SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$12.77Product Specifications- Notes: Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade; Inside Lock Rings;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade; Inside Lock Rings
- Bearing Cap Diameter: 1.125"
- Lock Ring Type: Internal
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286531055
- Part Description: 1994 GMC Sonoma Grade Performance™ Rear U-Joint
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$13.01Product Specifications- Notes: with GMC Axle; with 7.625in Ring Gear;with GMC Axle; with 7.5in Ring Gear
- Part Description: 1994 GMC Sonoma Rear Inner Differential Pinion Race
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
Dorman® OE Solution Rear Ring And Pinion Bearing Installation Kit for 1994 GMC Sonoma
PartNumber: 697-100$139.21Product Specifications- Notes: Std Design; 8.5" Ring Gear
- Bearing Type: Carrier
- Material: Steel
- UPC: 019495104872
- Part Description: 1994 GMC Sonoma OE Solution Rear Ring And Pinion Bearing Installation Kit
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$17.07Product Specifications- Notes: with GMC Axle; with 8.5in Ring Gear
- UPC: 724956020683
- Part Description: 1994 GMC Sonoma Front Outer Differential Pinion Bearing
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
$5.80Product Specifications- Notes: Press-On Slip Yoke Seal; 5/16-24 Bolts
- Bolt Length: 5/16-24"
- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 031447983038
- Width (Inch): 3.50
- Part Description: 1994 GMC Sonoma Universal Joint Strap Kit
Vehicle Fitment- 1994 GMC Sonoma | All Trims | All Engines
- $18.22 MSRP:
$34.10You Save: $15.88 (47%)Product Specifications- Notes: S-Series
- Other Names: Pinion Seal
- Item Dimensions: 3.8 x 3.8 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1994 GMC Sonoma Pinion Seal
Vehicle Fitment- 1994 GMC Sonoma | Base, GT, SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
1-30 of 231 Results
< Previous
12345
Next >