< Back ×
1996 Ford Windstar Ignition, Distributors & ECM
My Vehicle Change Vehicle
1996 Ford Windstar
< Back to View All
Engine & Drivetrain
- Department
- Part Type
- Brands
- Prices
$31.92Product Specifications- Coding: Coded
- Finish: Black
- Housing Material: Metal
- Installation Hardware Included: Not Required
- Key Programmable: No
- Key Quantity: 2
- Mounting Hardware Included: No
- UPC: 019495354062
- Wiring Harness Included: No
- Part Description: 1996 Ford Windstar Ignition Lock Cylinder
Vehicle Fitment- 1996 Ford Windstar | All Trims | All Engines
$86.06Product Specifications- Notes: OE Part
- Finish: Gray
- Tower Position: Vertical
- Tower Quantity: 6
- UPC: 042511179387
- Voltage: 12 VDC
- Part Description: 1996 Ford Windstar Ignition Coil
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- 1996 Ford Windstar | All Trims | 6 Cyl 3.8L
$61.53Product Specifications- Coil Type: Triple Coil Pack
- Mount Hole Quantity: 3
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Tower Position: Vertical
- UPC: 689604201190
- Part Description: 1996 Ford Windstar Ignition Coil
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- 1996 Ford Windstar | All Trims | 6 Cyl 3.8L
$17.45Product Specifications- Finish: Tan
- Key Programmable: No
- Keys: No
- Location: Steering Column
- Mounting Type: Bolt-on
- OE Part Number: F4DZ11572B
- Terminal Gender: Male
- Terminal Quantity: 15
- Terminal Type: Pin
- Tumbler: No
- UPC: 885484702806
- Part Description: 1996 Ford Windstar Ignition Switch
Vehicle Fitment- 1996 Ford Windstar | All Trims | All Engines
$49.48Product Specifications- Notes: Coil Pack
- Bracket: No
- Connector Gender: Female
- Finish: Black
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 874183002782
- Part Description: 1996 Ford Windstar Ignition Coil
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- 1996 Ford Windstar | All Trims | 6 Cyl 3.8L
$85.79 MSRP:$141.82You Save: $56.03 (40%)Product Specifications- Item Dimensions: 8.7 x 7.9 x 7.6 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1L3Z-11582-AB
- Part Description: 1996 Ford Windstar Warning Switch
Vehicle Fitment- 1996 Ford Windstar | 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
$38.01Product Specifications- Connector Gender: Female
- Ignition Type: Electronic
- Oil Filled: No
- Requires External Resistor: No
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Spade
- UPC: 724620078279
- Voltage: 12 Volts
- Part Description: 1996 Ford Windstar Ignition Coil
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- 1996 Ford Windstar | All Trims | 6 Cyl 3.8L
$161.73Product Specifications- Notes: This Unit is Pre-Programmed at the Factory;Correct VIN and OE Number Required When Ordering;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;with Calibration # 6-62J
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1996 Ford Windstar Remanufactured Engine Control Computer
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.8L
$99.43 MSRP:$164.36You Save: $64.93 (40%)Product Specifications- Notes: Windstar
- Other Names: Coil, Coil Assembly
- Item Dimensions: 8.3 x 4.4 x 5.9 inches
- Item Weight: 4.00 Pounds
- Replaces: F5SZ-12029-A, F1SZ-12029-A
- Part Description: 1996 Ford Windstar Coil Assembly
Vehicle Fitment- 1996 Ford Windstar | 3.0L, Base, GL, Limited, LX, SE, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
$601.20 MSRP:$832.27You Save: $231.07 (28%)Product Specifications- Notes: Windstar; 3.0L; Federal;Windstar; 3.8L; Federal
- Other Names: Control Module
- Item Dimensions: 10.5 x 6.6 x 2.4 inches
- Item Weight: 2.20 Pounds
- Part Description: 1996 Ford Windstar ECM
Vehicle Fitment- 1996 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- $601.20 MSRP:
$832.27You Save: $231.07 (28%)Product Specifications- Notes: Windstar; 3.0L; Federal;Windstar; 3.8L; Federal
- Other Names: Control Module
- Item Dimensions: 10.5 x 6.6 x 2.4 inches
- Item Weight: 2.20 Pounds
- Part Description: 1996 Ford Windstar ECM
Vehicle Fitment- 1996 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: This Unit is Pre-Programmed at the Factory;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;Correct VIN and OE Number Required When Ordering;with Calibration # 5-56P
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1996 Ford Windstar Remanufactured Engine Control Computer
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- Product Specifications
- Notes: Correct VIN and OE Number Required When Ordering;All Calibrations with Module ID ML1-311;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1996 Ford Windstar Remanufactured Engine Control Computer
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- Product Specifications
- Notes: with Calibration # 5-56K;Correct VIN and OE Number Required When Ordering;This Unit is Pre-Programmed at the Factory;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1996 Ford Windstar Remanufactured Engine Control Computer
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- Product Specifications
- Notes: All Calibrations with Module ID ML2-441, ML2-351;Correct VIN and OE Number Required When Ordering;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1996 Ford Windstar Remanufactured Engine Control Computer
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.8L
- Product Specifications
- Notes: Correct VIN and OE Number Required When Ordering;with Calibration # 6-62S;Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood.;This Unit is Pre-Programmed at the Factory
- Connector/Terminal Configuration: Pin/Male
- E-Waste: Yes
- Housing Material: Metal
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 104
- Part Description: 1996 Ford Windstar Remanufactured Engine Control Computer
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.8L
Product Specifications- Other Names: Ignition Switch
- Item Dimensions: 4.3 x 4.2 x 3.3 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Ford Windstar Ignition Switch
Vehicle Fitment- 1996 Ford Windstar | 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
Product Specifications- Attachment Method: Bolt-On
- Coil Included: Yes
- Coil Type: Electronic
- Color: Black
- Connector Gender: Female (1)
- Connector Quantity: 1
- Connector Shape: Oval, Rectangular
- Connector Type: Plug-In
- Grease Pack: No
- Hardware Included: No
- Ignition Type: Dis
- Instructions Included: No
- Location: Upper Intake Manifold
- Mounting Location: Engine Bay
- Terminal Gender: Male (1)
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 841266012921
- Voltage: 12 Volts
- Part Description: 1996 Ford Windstar Ignition Coil
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- 1996 Ford Windstar | All Trims | All Engines
Product Specifications- Notes: Black Finish;;F1AZ-11582A;Black Finish
- Coding: Coded
- Finish: Black
- Key Quantity: 2
- Key Type: Operable
- Keys Included: Yes
- Location: At Steering Column
- Mounting Location: Steering Column
- UPC: 841266043130
- Part Description: 1996 Ford Windstar Ignition Lock Cylinder
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- 1996 Ford Windstar | All Trims | All Engines
Product Specifications- Notes: Chrome Finish;;Chrome Finish
- Coding: Coded
- Color: Gray, White
- Finish: Chrome
- Key Quantity: 2
- Key Type: Operable
- Keys Included: Yes
- Mounting Bracket Included: No
- Mounting Location: Steering Column
- Terminal Quantity: 0
- UPC: 841266070662
- Voltage: 12
- Part Description: 1996 Ford Windstar Ignition Lock Cylinder
Vehicle Fitment- 1996 Ford Windstar | All Trims | 6 Cyl 3.0L
- 1996 Ford Windstar | All Trims | All Engines
- Product Specifications
- Notes: Windstar; 3.8L; California
- Part Description: 1996 Ford Windstar Engine Control Module
Vehicle Fitment- 1996 Ford Windstar | Base, GL, LX | 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: 3.0 L, Federal
- Part Description: 1996 Ford Windstar Ignition Control Module
Vehicle Fitment- 1996 Ford Windstar | 3.0L, Base, GL | 6 Cyl 3.0 L GAS
- Product Specifications
- Notes: Windstar; 3.0L; California
- Part Description: 1996 Ford Windstar Engine Control Module
Vehicle Fitment- 1996 Ford Windstar | Base, GL | 6 Cyl 3.0 L GAS
- Product Specifications
- Notes: Windstar; With Anti-Theft; Without Immobilizer Alarm; With Illuminated Entry, With Anti Theft; Key set includes ignition, side door, sliding door, lift gate, and glove compartment.
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1996 Ford Windstar Cylinder & Keys
Vehicle Fitment- 1996 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: Windstar; With Anti-Theft; With Immobilizer Alarm; With Illuminated Entry, With Immobilizer; Key set includes ignition, side door, sliding door, lift gate, and glove compartment.
- Part Description: 1996 Ford Windstar Ignition Lock Cylinder
Vehicle Fitment- 1996 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: Windstar; Without Anti-Theft; All; With Illuminated Entry, Without Anti Theft; Key set includes ignition, side door, sliding door, lift gate, and glove compartment.
- Part Description: 1996 Ford Windstar Ignition Lock Cylinder
Vehicle Fitment- 1996 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: 3.8 L, Federal
- Item Dimensions: 11.1 x 7.3 x 2.7 inches
- Item Weight: 2.50 Pounds
- Part Description: 1996 Ford Windstar Control Module
Vehicle Fitment- 1996 Ford Windstar | Base, GL, Limited, LX | 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: 3.8 L, California
- Item Dimensions: 11.2 x 7.4 x 2.8 inches
- Item Weight: 2.30 Pounds
- Part Description: 1996 Ford Windstar Control Module
Vehicle Fitment- 1996 Ford Windstar | Base, GL, Limited, LX | 6 Cyl 3.8 L GAS
- Product Specifications
- Notes: 3.0 L, California
- Item Dimensions: 11.0 x 7.2 x 2.8 inches
- Item Weight: 2.30 Pounds
- Part Description: 1996 Ford Windstar Control Module
Vehicle Fitment- 1996 Ford Windstar | 3.0L, Base, GL | 6 Cyl 3.0 L GAS