< Back ×
1997 Land Rover Defender 90 Driveline, Axles & 4WD
My Vehicle Change Vehicle
1997 Land Rover Defender 90
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1997 Land Rover Defender 90
PartNumber: 65-9921$533.51Product Specifications- Notes: with 23-1/4" (590 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face
- Greasable: Yes
- Length: 23.25"
- Length (mm): 590
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1997 Land Rover Defender 90 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
$17.05Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 2.935"
- UPC: 085311099479
- Part Description: 1997 Land Rover Defender 90 Rear U Joint
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
$21.86Product Specifications- Notes: w/Rover LT230T Transfer Case; 2Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 1997 Land Rover Defender 90 Driveshaft Center Support Bearing
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
$10.78Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.94
- Length Axis 2: 2.94
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286011007
- Weight (Gross Pounds): 1.0
- Width (Inch): 3.50
- Part Description: 1997 Land Rover Defender 90 Grade Standard U-Joint
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
$14.28Product Specifications- Cone ID: 1.7812"
- Cone Length: 0.7812"
- Cone Radius: 0.1400"
- Cup Length: 0.5937"
- Cup Radius: 0.0300"
- Outer Diameter: 3.0625"
- UPC: 085311068840
- Width: 0.7812"
- Part Description: 1997 Land Rover Defender 90 Rear Differential Bearing
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
$8.44Product Specifications- Cup Length: 0.593"
- Cup Radius: 0.030"
- Outside Diameter: 3.063"
- UPC: 085311057219
- Width: 0.781"
- Part Description: 1997 Land Rover Defender 90 Rear Axle Shaft Bearing Race
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
$4.70Product Specifications- Notes: Centric Premium Oil & Grease Seal
- UPC: 805890720935
- Part Description: 1997 Land Rover Defender 90 Premium™ Axle Shaft Seal
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
$32.88Product Specifications- Notes: Only Works w/Dorman Driveshaft 938-210
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Finish: Steel
- Coating Type: Grease
- Color/Finish: Silver
- Greasable: No
- Grease Type: Multi Purpose Bearing Grease
- Grease Zerks Included: No
- Length Between Inside Snap Rings Axis 1: 3.219"
- Length Between Inside Snap Rings Axis 2: 3.219"
- Pre Greased: Yes
- Seal Material: Rubber
- Snap Ring Type: External
- Universal Joint Cross Material: Steel
- UPC: 885484839441
- Part Description: 1997 Land Rover Defender 90 OE Solutions Rear Driveshaft Repair Kit
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
Product Specifications- Notes: FAG Global# 401089
- Bearing Inside Diameter: 1.781; 45.242
- Length: 0.781; 19.842
- UPC: 670774290602
- Part Description: 1997 Land Rover Defender 90 Differential Bearing
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
Product Specifications- Notes: w/Salisbury 8HA Axle; w/8.589in Ring Gear;w/Salisbury 8HS Axle; w/8.589in Ring Gear
- Part Description: 1997 Land Rover Defender 90 Differential Bearing Race
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines
Product Specifications- Notes: w/Salisbury 8HA Axle; w/8.589in Ring Gear;w/Salisbury 8HS Axle; w/8.589in Ring Gear
- Part Description: 1997 Land Rover Defender 90 Differential Pinion Bearing
Vehicle Fitment- 1997 Land Rover Defender 90 | All Trims | All Engines