< Back ×
1998 Ford F-150 Driveline, Axles & 4WD
My Vehicle Change Vehicle
1998 Ford F-150
$240.36Product Specifications- Notes: 8.8" Ring Gear; w/4.10 Axle Ratio
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- UPC: 019495105503
- Part Description: 1998 Ford F-150 OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$14.96Product Specifications- Notes: COMPAT w/SPICER SERIES: 1480, 1550; BEARING ID / BORE: 1.5750 INCH / 40 MM;CENTERLINE: 2.48 INCH / 63 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;NOT PICTURED: TWO DUST SHIELDS;
- Centerline Length: 2.48"
- Inside Diameter: 1.575"
- Mount Width: 6.62"
- Shape: Round
- UPC: 081106060389
- Part Description: 1998 Ford F-150 Driveshaft Center Support Bearing
Vehicle Fitment- 1998 Ford F-150 | All Trims | 6 Cyl 4.2L
- 1998 Ford F-150 | All Trims | 8 Cyl 4.6L
- 1998 Ford F-150 | All Trims | 8 Cyl 5.4L
$253.32Product Specifications- Notes: 8.8" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- OE Part Number: 3L1Z4209AA, 5L3Z4209B, 8R3Z4209C, E3TZ-4209-J
- UPC: 019495105442
- Part Description: 1998 Ford F-150 OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$601.28Product Specifications- Notes: with 50-11/16" (1287 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Greasable: Yes
- Length: 50.687"
- Length (mm): 1287
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1998 Ford F-150 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1998 Ford F-150 | All Trims | 6 Cyl 4.2L
- 1998 Ford F-150 | All Trims | 8 Cyl 4.6L
$110.46Product Specifications- Notes: Bearing & Support
- Bolt Hole Center: 6.616"
- Inside Diameter: 1.575"
- OE Part Number: F75Z4800BB
- Outside Diameter: 4.687"
- UPC: 085311419017
- Width: 1.850"
- Part Description: 1998 Ford F-150 Driveshaft Center Support Bearing
Vehicle Fitment- 1998 Ford F-150 | All Trims | 8 Cyl 5.4L
- 1998 Ford F-150 | All Trims | 6 Cyl 4.2L
- 1998 Ford F-150 | All Trims | 8 Cyl 4.6L
$18.57 MSRP:$26.67You Save: $8.10 (31%)Product Specifications- Notes: F150; Standard Payload; 8.8" Ring Gear;F150; Standard Payload; 9.75" Ring Gear
- Other Names: Oil Seal, Pinion Gear Seal, Pinion Seal
- Item Dimensions: 9.2 x 7.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: E8TZ-4676-C, F89Z-4676-AA
- Part Description: 1998 Ford F-150 Pinion Gear Seal
Vehicle Fitment- 1998 Ford F-150 | Base, FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Lightning, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
$12.74Product Specifications- Notes: COMPAT w/SPICER SERIES: 1280, 1410; BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;COMPLETE MOUNT;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- Shape: Round
- UPC: 081106060563
- Part Description: 1998 Ford F-150 Driveshaft Center Support Bearing
Vehicle Fitment- 1998 Ford F-150 | All Trims | 6 Cyl 4.2L
- 1998 Ford F-150 | All Trims | 8 Cyl 4.6L
- 1998 Ford F-150 | All Trims | 8 Cyl 5.4L
$47.52Product Specifications- Notes: 9 3/4" RA; Fr 12/98
- UPC: 805890580072
- Part Description: 1998 Ford F-150 Premium™ Rear Axle Shaft Repair Bearing
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$230.78Product Specifications- Notes: 8.8" Ring Gear; w/4.56 Axle Ratio
- Gear Ratio: 4.56
- Item Grade: Standard Replacement
- UPC: 019495515678
- Part Description: 1998 Ford F-150 OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$127.93Product Specifications- Notes: Master Kit; 8.80" Ring Gear;Master; 8.80 " Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470964
- Width: 2.50"
- Part Description: 1998 Ford F-150 Rear Master Differential Rebuild Kit With Shims
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$14.19Product Specifications- Notes: with 8.800in Ring Gear;10 Bolt;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 10
- Thickness (in): 0.031"
- UPC: 023913682552
- Part Description: 1998 Ford F-150 Axle Housing Cover Gasket
Vehicle Fitment- 1998 Ford F-150 | All Trims | 6 Cyl 4.2L
- 1998 Ford F-150 | All Trims | 8 Cyl 4.6L
- 1998 Ford F-150 | All Trims | 8 Cyl 5.4L
- $18.57 MSRP:
$26.67You Save: $8.10 (31%)Product Specifications- Notes: F150; Standard Payload; 8.8" Ring Gear;F150; Standard Payload; 9.75" Ring Gear
- Other Names: Oil Seal, Pinion Gear Seal, Pinion Seal
- Item Dimensions: 9.2 x 7.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: E8TZ-4676-C, F89Z-4676-AA
- Part Description: 1998 Ford F-150 Pinion Gear Seal
Vehicle Fitment- 1998 Ford F-150 | Base, FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Lightning, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
$173.87Product Specifications- Notes: 8.8" Ring Gear; Locking Differential; Tag# 821C, 821D, 821DA, 821F, 821J, 825C, 825D, 825DA, 825F, or 825J;8.8" Ring Gear; Tag# 802C, 802D, 802DA, 802F, 802J, 820C, 820D, 820DA, 820F, or 820J; Exc Locking Differential
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 33.39"
- Material: Carbon Steel
- OE Part Number: F75Z4234KB
- Spline Quantity: 31 Spline
- UPC: 019495225355
- Wheel Lug Quantity: 5
- Part Description: 1998 Ford F-150 OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$111.31Product Specifications- Notes: Std Kit; w/Ford Axle; Independent Front Susp; w/8.8in Ring Gear;Std Kit; w/Ford Axle; w/8.8in Ring Gear
- Part Description: 1998 Ford F-150 Front Differential Master Bearing Kit
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$99.66Product Specifications- Notes: Std Kit; 8.80" Ring Gear;Std; 8.80 " Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470483
- Width: 2.50"
- Part Description: 1998 Ford F-150 Rear Differential Rebuild Kit
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$198.08Product Specifications- Notes: 8.8" Ring Gear; w/3.73 Axle Ratio
- Gear Ratio: 3.73
- Item Grade: Standard Replacement
- UPC: 037495175883
- Part Description: 1998 Ford F-150 Oe Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$99.16Product Specifications- ABS Ring Included: No
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 19 7/8"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 33
- Product Condition: Remanufactured
- Spindle Nut Included: No
- Part Description: 1998 Ford F-150 Remanufactured CV Axle Assembly
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$15.17 MSRP:$22.17You Save: $7.00 (32%)Product Specifications- Notes: F150
- Location: Driver Side; Passenger Side
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: E3TZ-1225-A
- Part Description: 1998 Ford F-150 Axle Shaft Bearing
Vehicle Fitment- 1998 Ford F-150 | Base, Custom, Eddie Bauer, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, Special, STX, XL, XLT, XLT Lariat | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 6.9 L DIESEL
$14.85Product Specifications- Notes: Spicer 1280, 1410; Bearings ID = 1.3780 - 1.3775";U-Shaped Bracket; w/o Studs; w/o Spacer Block; Bearings ID = 1.3780 - 1.3775"
- UPC: 656591060567
- Part Description: 1998 Ford F-150 Driveshaft Center Support
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$61.16Product Specifications- Notes: Short Bed
- Earhole Diameter: 1.0620"
- UPC: 085311556156
- Width: 3.469"
- Part Description: 1998 Ford F-150 Driveshaft End Yoke
Vehicle Fitment- 1998 Ford F-150 | All Trims | 8 Cyl 5.4L
$200.73Product Specifications- Notes: 8.8" Ring Gear; Locking Differential; Tag# 821C, 821D, 821DA, 821F, 821J, 825C, 825D, 825DA, 825F, or 825J;8.8" Ring Gear; Tag# 802C, 802D, 802DA, 802F, 802J, 820C, 820D, 820DA, 820F, or 820J; Exc Locking Differential
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 31.75"
- Material: Carbon Steel
- OE Part Number: F75Z4234KA
- Spline Quantity: 31 Spline
- UPC: 019495225362
- Wheel Lug Quantity: 5
- Part Description: 1998 Ford F-150 OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$15.40Product Specifications- Notes: Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade; 1.063" Bearing Cap Dia;Grease Fitting in Cross; Perf Grade; 1.063" Bearing Cap Dia;Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade; 1.063" Bearing Cap Dia;Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 1998 Ford F-150 Grade Performance™ Rear U-Joint
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$174.94Product Specifications- Notes: Semi-Floating Axle; 9.75" Ring Gear; Tag# V916A, V916B, V916C, 916B, 916C, 918E, 918F, or 919F
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 10
- Length: 33.38"
- Material: Carbon Steel
- OE Part Number: YL3Z4234-CB
- Spline Quantity: 34 Spline
- UPC: 019495437482
- Wheel Lug Quantity: 10
- Part Description: 1998 Ford F-150 OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$10.90 MSRP:$15.66You Save: $4.76 (31%)Product Specifications- Notes: F150
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Ford F-150 Axle Tube Bearing
Vehicle Fitment- 1998 Ford F-150 | Base, FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, Limited, Platinum, Police Responder, Raptor, Raptor R, SSV, STX, THE 60TH ANNIVERSARY EDITION, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
$29.93Product Specifications- Notes: w/Borg-Warner 4406 Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 1998 Ford F-150 Driveshaft Center Support Bearing
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$13.41Product Specifications- Notes: Std Grade; 3 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Dia;Std Grade; Sealed Unit; 1.188" Bearing Cap Dia;Std Grade; 2 Joint Driveshaft; Sealed Unit; 1.188" Bearing Cap Dia
- Dimension: 1.188" Cap Diameter
- Height (Inch): 1.30
- Length (Inch): 4.0
- UPC: 031447983809
- Weight (Gross Pounds): 1.40
- Width (Inch): 4.0
- Part Description: 1998 Ford F-150 Grade Standard Non Greasable U-Joint
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$172.57Product Specifications- Notes: Semi-Floating Axle; 9.75" Ring Gear; Tag# V916A, V916B, V916C, 916B, 916C, 918E, 918F, or 919F
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 10
- Length: 31.72"
- Material: Carbon Steel
- OE Part Number: YL3Z4234-CA
- Spline Quantity: 34 Spline
- UPC: 019495437475
- Wheel Lug Quantity: 10
- Part Description: 1998 Ford F-150 OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$21.86Product Specifications- Notes: w/Borg-Warner 4406 Transfer Case; 2Spd; w/Part Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 1998 Ford F-150 Driveshaft Center Support Bearing
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade; 1.188" Bearing Cap Dia;Grease Fitting in Cross; Perf Grade; 1.188" Bearing Cap Dia;Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade; 1.188" Bearing Cap Dia
- Bearing Cap Diameter: 1.188"
- Lock Ring Size: 3.624"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501782
- Part Description: 1998 Ford F-150 Grade Performance™ Front U-Joint
Vehicle Fitment- 1998 Ford F-150 | All Trims | All Engines
- $10.90 MSRP:
$15.66You Save: $4.76 (31%)Product Specifications- Notes: F150
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1998 Ford F-150 Axle Tube Bearing
Vehicle Fitment- 1998 Ford F-150 | Base, FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, Limited, Platinum, Police Responder, Raptor, Raptor R, SSV, STX, THE 60TH ANNIVERSARY EDITION, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
1-30 of 188 Results
< Previous
12345
Next >