170 products about 2000 Dodge Durango Driveline, Axles & 4WD found Filter Results
Sort
View by
Make sure this part fits, Select Vehicle Product Specifications Notes: 9.25" Ring Gear; w/3.90 Axle Ratio Gear Ratio: 3.90 Item Grade: Standard Replacement UPC: 019495515708 Part Description: 2000 Dodge Durango OE Solutions Rear Differential Ring And Pinion More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: COMPAT w/SPICER SERIES: 1260, 1410; BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;COMPLETE MOUNT; Centerline Length: 2.28" Inside Diameter: 1.378" Mount Width: 6.62" Shape: Round UPC: 081106060563 Part Description: 2000 Dodge Durango Driveshaft Center Support Bearing More Info Vehicle Fitment 2000 Dodge Durango | All Trims | 8 Cyl 5.2L 2000 Dodge Durango | All Trims | 8 Cyl 5.9L 2000 Dodge Durango | All Trims | 8 Cyl 4.7L Show More Make sure this part fits, Select Vehicle Product Specifications Notes: Master Kit; 9.25" Ring Gear Inner Diameter: 11.0" Outer Diameter: 11.50" UPC: 085311471404 Width: 2.50" Part Description: 2000 Dodge Durango Rear Master Differential Rebuild Kit With Bolts More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: 9.25" Ring Gear; w/3.55 Axle Ratio Gear Ratio: 3.55 Item Grade: Standard Replacement UPC: 019495105473 Part Description: 2000 Dodge Durango OE Solutions Rear Differential Ring And Pinion More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: 8.25" Ring Gear ABS Tone Ring Installed: Not Included Axle Type: Solid Shaft Axle Hole Quantity: 6 Length: 30.26" Material: Carbon Steel OE Part Number: 52069512AB Spline Quantity: 29 Spline UPC: 019495471561 Wheel Lug Quantity: 6 Part Description: 2000 Dodge Durango OE Solutions Rear Passenger Side Axle Shaft More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: with 25-5/8" (652 mm) Long Driveshaft;Supplied as new; Measurement is taken from center of U-joint to the end of flange on the opposite side Greasable: Yes Length: 25.625" Length (mm): 652 Material: Steel Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Product Condition: Remanufactured Part Description: 2000 Dodge Durango Remanufactured Driveshaft/ Prop Shaft More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: with 9.250in Ring Gear;12 Bolt;Rear Contains Applications: Y Material: Fiber Mount Hole Quantity: 12 Thickness (in): 0.030" UPC: 023913682705 Part Description: 2000 Dodge Durango Axle Housing Cover Gasket More Info Vehicle Fitment 2000 Dodge Durango | All Trims | 8 Cyl 5.2L 2000 Dodge Durango | All Trims | 8 Cyl 5.9L 2000 Dodge Durango | All Trims | 8 Cyl 4.7L Show More Make sure this part fits, Select Vehicle Product Specifications Notes: 8.25" Ring Gear ABS Tone Ring Installed: Not Included Axle Type: Solid Shaft Axle Hole Quantity: 6 Length: 33.27" Material: Carbon Steel OE Part Number: 52069513AB Spline Quantity: 29 Spline UPC: 019495471578 Wheel Lug Quantity: 6 Part Description: 2000 Dodge Durango OE Solutions Rear Driver Side Axle Shaft More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: with Chrysler Axle; with 9.25in Ring Gear UPC: 614046887015 Part Description: 2000 Dodge Durango Rear Differential Master Bearing Kit More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Std Kit; 9.25" Ring Gear Inner Diameter: 11.0" Outer Diameter: 11.50" UPC: 085311470469 Width: 2.50" Part Description: 2000 Dodge Durango Rear Differential Rebuild Kit More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications ABS Ring Included: No Input Shaft Connection Style: Spline Input Shaft Spline Count: 29 Length: 20 13/16" Output Shaft Connection Style: Spline Output Shaft Spline Count: 31 Product Condition: Remanufactured Spindle Nut Included: No Part Description: 2000 Dodge Durango Remanufactured CV Axle Assembly More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: with Chrysler Axle; with 8.25in Ring Gear Part Description: 2000 Dodge Durango Rear Differential Master Bearing Kit Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Std Kit; 8.25" Ring Gear: Inner Diameter: 11.0" Outer Diameter: 11.50" UPC: 085311499255 Width: 2.50" Part Description: 2000 Dodge Durango Rear Differential Rebuild Kit More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Chrysler Axle; 9.25" Ring Gear ABS Tone Ring Installed: Not Included Axle Type: Solid Shaft Axle Hole Quantity: 6 Length: 30.17" Material: Carbon Steel OE Part Number: 52069388AB Spline Quantity: 31 Spline UPC: 019495225461 Wheel Lug Quantity: 6 Part Description: 2000 Dodge Durango OE Solutions Rear Passenger Side Axle Shaft More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: 1.378" I.D. Bolt Hole Center: 6.629" Inside Diameter: 1.378" Outside Diameter: 4.980" UPC: 085311493598 Width: 1.941" Part Description: 2000 Dodge Durango Driveshaft Center Support Bearing More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Grease Fitting in Cross; Perf Grade Bearing Cap Diameter: 1.063" Lock Ring Size: 3.622" Lock Ring Type: External Lubrication Method: Grease Fitting in Cross UPC: 083286512030 Part Description: 2000 Dodge Durango Grade Performance™ Rear U-Joint More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Type: A-1 Part Description: 2000 Dodge Durango Differential Bearing Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Chrysler Axle; 9.25" Ring Gear ABS Tone Ring Installed: Not Included Axle Type: Solid Shaft Axle Hole Quantity: 6 Length: 33.31" Material: Carbon Steel OE Part Number: 52069389AB Spline Quantity: 31 Spline UPC: 019495225454 Wheel Lug Quantity: 6 Part Description: 2000 Dodge Durango OE Solutions Rear Driver Side Axle Shaft More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Repair;Repair; w/8.25" & 9.25" Ring Gears Inside Diameter: 1.618" OE Part Number: 9759R1559, ZZL126175 Outside Diameter: 2.577" UPC: 085311066273 Width: 1.303" Part Description: 2000 Dodge Durango Rear Axle Shaft Bearing Assembly More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Grease Fitting in Cross; Perf Grade Bearing Cap Diameter: 1.063" Lock Ring Size: 3.220" Lock Ring Type: External Lubrication Method: Grease Fitting in Cross UPC: 083286501539 Part Description: 2000 Dodge Durango Grade Performance™ Rear U-Joint More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: 8.25",9.25" Ring Gear; FAG Global# FC67148.5; .830" Wide Brg.;FAG Global# FC67148.5; .830" Wide Brg. UPC: 670774196836 Part Description: 2000 Dodge Durango Rear Axle Shaft Bearing More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: w/9.25" Chrysler Rear Axle Color/Finish: Black Differential Cover Bolt Count: 12 Differential Cover Bolts/Studs Included: No Differential Cover Carrier Main Cap Support: No Differential Cover/Case Filler Plug Included: Yes Differential Cover/Case Material: Steel Gasket or Seal Included: No OE Part Number: 4384293AC, 53007762 UPC: 037495174978 Part Description: 2000 Dodge Durango OE Solutions Rear Differential Cover More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Incls Bearing & Support; w/1.378in Bearing ID; w/35mm Bearing ID; Slip Yoke Style; w/Spicer 1280,1310 U-Joint(s) Bolt Holes (Inch): 6.6240 Centerline Height: 2.28" Inside Diameter: 1.378" Outside Diameter: 2.834" Type: 2 Width: 6.624" Part Description: 2000 Dodge Durango Driveshaft Center Support Bearing More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: 9.25" Ring Gear Cone ID: 1.875" Cone Length: 1" Cone Radius: 0.14" UPC: 085311057615 Width: 1" Part Description: 2000 Dodge Durango Rear Outer Axle Shaft Bearing More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross Bearing Cap Diameter Axis 1: 1.063" Bearing Cap Diameter Axis 2: 1.063" Bearing Cap Type: Plain Greasable: Yes Length Axis 1: 3.62 Length Axis 2: 3.62 Lock Ring Location: External Lube Fitting Location: Grease Fitting in Cross Material: Steel With Black Oxide Coating Style: 4 Round Plain Bearings Universal Joint Style: Spicer 1330 UPC: 083286002135 Width: 3.622" Overall Axis Part Description: 2000 Dodge Durango Grade Standard U-Joint More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: 8.25" Ring Gear Color/Finish: Black/Epoxy E-coat Differential Cover Bolt Count: 10 Differential Cover Bolts/Studs Included: No Differential Cover Carrier Main Cap Support: No Differential Cover/Case Filler Plug Included: Yes Differential Cover/Case Material: Steel Gasket Material: Not Applicable Gasket or Seal Included: No OE Part Number: 3723681AC UPC: 019495365020 Part Description: 2000 Dodge Durango OE Solutions Differential Cover More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Axle Repair Bearing Part Description: 2000 Dodge Durango Rear Axle Shaft Bearing Vehicle Fitment 2000 Dodge Durango | All Trims | 8 Cyl 5.2L 2000 Dodge Durango | All Trims | 8 Cyl 5.9L 2000 Dodge Durango | All Trims | All Engines 2000 Dodge Durango | All Trims | 8 Cyl 4.7L Show More Make sure this part fits, Select Vehicle Product Specifications Notes: w/New Process 231DHD Transfer Case; 2Spd; w/Part Time 4WD;w/New Process 242D Transfer Case; 2Spd; Full Time 4WD Bore (Inch): 1.378 Bore (mm): 35.00 Design: Single Row Radial Inner Race Bore (Inch): 1.378 Inner Race Bore (mm): 35.00 Inner Race Radius (Inch): 0.040 Inner Race Radius (mm): 1.020 Inner Race Width (Inch): 0.669 Inner Race Width (mm): 17.00 Outer Race Outside Diameter (Inch): 2.835 Outer Race Outside Diameter (mm): 72.00 Outer Race Radius (Inch): 0.040 Outer Race Radius (mm): 1.020 Outer Race Width (Inch): 0.669 Outer Race Width (mm): 17.00 Outside Diameter (Inch): 2.835 Outside Diameter (mm): 72.00 Series: 200 Type: A-1 Width (Inch): 0.669 Width (mm): 17.00 Part Description: 2000 Dodge Durango Driveshaft Center Support Bearing More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: 1/4-28 Bolts Bolt Length: 1/4-28" Height (Inch): 1.30 Length (Inch): 3.50 UPC: 083286108196 Width (Inch): 3.50 Part Description: 2000 Dodge Durango Universal Joint Strap Kit More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines Make sure this part fits, Select Vehicle Product Specifications Notes: Uni-Fit; Joint Dia 3.3"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.3" Boot Color: Grey Grease Type: Non-synthetic Joint End Inside Diameter: 3.3" Material: Silicone Package Quantity: 1 Packaging Type: Box Rib Quantity: 6 Shaft End Inside Diameter: 0.87" Split Or Solid Type: Solid UPC: 019495615323 Vented Boot: No Part Description: 2000 Dodge Durango OE Solutions Inner Cv Joint Boot Kit More Info Vehicle Fitment 2000 Dodge Durango | All Trims | All Engines