< Back ×
2000 Ford Explorer Driveline, Axles & 4WD
My Vehicle Change Vehicle
2000 Ford Explorer
$323.15Product Specifications- Drive Shaft Diameter (In): 1.75"
- Drive Shaft Wall Thickness (In): 0.095"
- Greaseable Drive Shaft: Yes
- Length: 30.75"
- Material: Steel
- OE Part Number: XL2Z-4A376-AA, ZZR0-25-100
- Outside Diameter: 1.75"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Automatic / Manual
- UPC: 037495119252
- Wall Thickness: 0.095"
- Part Description: 2000 Ford Explorer OE Solutions Front Driveshaft
Vehicle Fitment- 2000 Ford Explorer | All Trims | 6 Cyl 4.0L
$127.93Product Specifications- Notes: Master Kit; 8.80" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470964
- Width: 2.50"
- Part Description: 2000 Ford Explorer Rear Master Differential Rebuild Kit With Shims
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$429.59Product Specifications- Notes: with 28-3/8" (721 mm) Long Driveshaft;Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: No
- Length: 28.375"
- Length (mm): 721
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2000 Ford Explorer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2000 Ford Explorer | All Trims | 8 Cyl 5.0L
$240.36Product Specifications- Notes: 8.8" Ring Gear; w/4.10 Axle Ratio
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- UPC: 019495105503
- Part Description: 2000 Ford Explorer OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$99.66Product Specifications- Notes: Std Kit; 8.80" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470483
- Width: 2.50"
- Part Description: 2000 Ford Explorer Rear Differential Rebuild Kit
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$14.56 MSRP:$21.27You Save: $6.71 (32%)Product Specifications- Notes: 4WD; Explorer, Mountaineer; Left
- Location: Driver Side
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: F57Z-3254-BA
- Part Description: 2000 Ford Explorer Axle Seal
Vehicle Fitment- 2000 Ford Explorer | Base, Eddie Bauer, Expedition, Limited, NBX, Platinum, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$394.77Product Specifications- Notes: with 29-3/8" (746 mm) Long Driveshaft;Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: No
- Length: 29.375"
- Length (mm): 746
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2000 Ford Explorer Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2000 Ford Explorer | All Trims | 6 Cyl 4.0L
$14.19Product Specifications- Notes: with 8.800in Ring Gear;10 Bolt;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 10
- Thickness (in): 0.031"
- UPC: 023913682552
- Part Description: 2000 Ford Explorer Axle Housing Cover Gasket
Vehicle Fitment- 2000 Ford Explorer | All Trims | 8 Cyl 5.0L
- 2000 Ford Explorer | All Trims | 6 Cyl 4.0L
$253.32Product Specifications- Notes: 8.8" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- OE Part Number: 3L1Z4209AA, 5L3Z4209B, 8R3Z4209C, E3TZ-4209-J
- UPC: 019495105442
- Part Description: 2000 Ford Explorer OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$111.31Product Specifications- Notes: Std Kit; w/Ford Axle; w/8.8in Ring Gear
- Part Description: 2000 Ford Explorer Front Differential Master Bearing Kit
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$230.78Product Specifications- Notes: 8.8" Ring Gear; w/4.56 Axle Ratio
- Gear Ratio: 4.56
- Item Grade: Standard Replacement
- UPC: 019495515678
- Part Description: 2000 Ford Explorer OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$18.57 MSRP:$26.67You Save: $8.10 (31%)Product Specifications- Notes: Explorer, Mountaineer
- Other Names: Oil Seal, Pinion Gear Seal, Pinion Seal
- Item Dimensions: 9.2 x 7.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: E8TZ-4676-C, F89Z-4676-AA
- Part Description: 2000 Ford Explorer Pinion Gear Seal
Vehicle Fitment- 2000 Ford Explorer | Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$29.93Product Specifications- Notes: w/Borg-Warner 4403 Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2000 Ford Explorer Driveshaft Center Support Bearing
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$31.60Product Specifications- Notes: Mazda Trans.
- Cone ID: 1.571"
- Cone Length: 0.851"
- Cone Radius: 0.09"
- Cup Length: 0.627"
- Cup Radius: 0.09"
- Outside Diameter: 2.875"
- UPC: 085311190367
- Width: 0.831"
- Part Description: 2000 Ford Explorer Center Axle Shaft Bearing Kit
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$178.21Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 27.62"
- Material: Carbon Steel
- OE Part Number: 3L2Z4234AA, F5TZ4234-A
- Spline Quantity: 31 Spline
- UPC: 019495146957
- Wheel Lug Quantity: 5
- Part Description: 2000 Ford Explorer OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$198.08Product Specifications- Notes: 8.8" Ring Gear; w/3.73 Axle Ratio
- Gear Ratio: 3.73
- Item Grade: Standard Replacement
- UPC: 037495175883
- Part Description: 2000 Ford Explorer Oe Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$15.40Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 2000 Ford Explorer Grade Performance™ Rear U-Joint
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
- $18.57 MSRP:
$26.67You Save: $8.10 (31%)Product Specifications- Notes: Explorer, Mountaineer
- Other Names: Oil Seal, Pinion Gear Seal, Pinion Seal
- Item Dimensions: 9.2 x 7.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: E8TZ-4676-C, F89Z-4676-AA
- Part Description: 2000 Ford Explorer Pinion Gear Seal
Vehicle Fitment- 2000 Ford Explorer | Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
$21.86Product Specifications- Notes: w/Borg-Warner 4403 Transfer Case; 2Spd; w/Part Time 4WD;w/Borg-Warner 4405 Transfer Case; 2Spd; w/Part Time 4WD;w/Borg-Warner 4404 Transfer Case; 2Spd; w/Part Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2000 Ford Explorer Driveshaft Center Support Bearing
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$29.39Product Specifications- Notes: Repair Bearing
- Inside Diameter: 1.399"
- Outside Diameter: 2.294"
- UPC: 085311066280
- Width: 1.211"
- Part Description: 2000 Ford Explorer Front Driver Side Axle Shaft Bearing Assembly
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$161.66Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 30.53"
- Material: Carbon Steel
- OE Part Number: 3L2Z4234AB, F5TZ4234-B
- Spline Quantity: 31 Spline
- UPC: 019495146933
- Wheel Lug Quantity: 5
- Part Description: 2000 Ford Explorer OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
Dorman® OE Solution Rear Ring And Pinion Bearing Installation Kit for 2000 Ford Explorer
PartNumber: 697-101$138.77Product Specifications- Notes: Std Design; 8.8" Ring Gear
- Bearing Type: Carrier
- Material: Steel
- UPC: 019495104889
- Part Description: 2000 Ford Explorer OE Solution Rear Ring And Pinion Bearing Installation Kit
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2000 Ford Explorer Grade Performance™ Rear U-Joint
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$15.17 MSRP:$22.17You Save: $7.00 (32%)Product Specifications- Notes: Explorer, Mountaineer
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: E3TZ-1225-A
- Part Description: 2000 Ford Explorer Axle Shaft Bearing
Vehicle Fitment- 2000 Ford Explorer | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
$29.26Product Specifications- Notes: Repair
- Inside Diameter: 1.618"
- OE Part Number: 9759R1559, ZZL126175
- Outside Diameter: 2.577"
- UPC: 085311066273
- Width: 1.303"
- Part Description: 2000 Ford Explorer Rear Axle Shaft Bearing Assembly
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$10.55Product Specifications- Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Type: Plain
- Greasable: Yes
- Length Axis 1: 3.62
- Length Axis 2: 3.62
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Style: 4 Round Plain Bearings
- Universal Joint Style: Spicer 1330
- UPC: 083286002135
- Width: 3.622" Overall Axis
- Part Description: 2000 Ford Explorer Grade Standard U-Joint
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$32.75Product Specifications- Notes: Axle Repair Bearing
- Part Description: 2000 Ford Explorer Rear Axle Shaft Bearing
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
- 2000 Ford Explorer | All Trims | 6 Cyl 4.0L
- 2000 Ford Explorer | All Trims | 8 Cyl 5.0L
$121.24Product Specifications- Notes: Propeller Shaft
- Additional Contents: Boot Clamp, Snap Ring
- Bolt Circle Diameter: 3.596"
- Bolt Diameter: 0.347"
- Bolt Hole Quantity: 6
- Bolt Thread Sizes: M8 X 1.25
- Color/Finish: Natural
- Grease Included: Yes
- Housing Outside Diameter (in): 4.206"
- Housing Thickness (in): 1.394"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Steel
- Spline Count: 26
- Spline Diameter (In): 1.051"
- Spline Length (In): 1.297"
- UPC: 019495272397
- Part Description: 2000 Ford Explorer OE Solutions Front Propeller Shaft Cv Joint Kit
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$6.48Product Specifications- Notes: FAG Global# FC67148.5; .830" Wide Brg.
- UPC: 670774196836
- Part Description: 2000 Ford Explorer Rear Axle Shaft Bearing
Vehicle Fitment- 2000 Ford Explorer | All Trims | All Engines
$16.83 MSRP:$24.17You Save: $7.34 (31%)Product Specifications- Notes: Explorer, Mountaineer
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: E5SZ-1225-A
- Part Description: 2000 Ford Explorer Axle Housing Bearing
Vehicle Fitment- 2000 Ford Explorer | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
1-30 of 160 Results
< Previous
12345
Next >