< Back ×
2000 Ford Ranger Wheel Hubs, Bearings, Seals & Components
My Vehicle Change Vehicle
2000 Ford Ranger
Dorman® OE Solutions Front Driver Side Wheel Bearing And Hub Assembly for 2000 Ford Ranger
PartNumber: 951-055$115.53Product Specifications- Notes: wo/Pulse Vac Locking Hubs
- Bolt Pattern_New: 5
- Inside Diameter: 1.11"
- Lug Pattern: 5
- Material: Steel
- Mounting Flange Material: Steel
- Outside Diameter: 5.88"
- Package Contents: Hub Bearing
- UPC: 885484605626
- Part Description: 2000 Ford Ranger OE Solutions Front Driver Side Wheel Bearing And Hub Assembly
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$118.26Product Specifications- Notes: w/ Pulse Vacuum Hub Locks
- Bolt Circle Diameter B: 4.10"
- Bolt Size: M12X1.5
- Flange Diameter: 5.8850"
- Inner Diameter: 1.2450"
- Sensor Ring: Yes
- UPC: 085311355643
- Part Description: 2000 Ford Ranger Front Driver Side Wheel Bearing And Hub Assembly
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$90.41Product Specifications- Notes: w/Pulse Vac Hub Locks; Wheel Hub Assy; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced.
- Flange Diameter (Inch): 5.88
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.94
- Material: Steel
- Product Condition: New
- Spline Quantity: 42
- Stud Quantity: 5
- UPC: 029175923396
- Wiring Harness Included: No
- Part Description: 2000 Ford Ranger WHEEL BEARING AND HUB ASSEMBLY
Vehicle Fitment- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
- 2000 Ford Ranger | All Trims | 6 Cyl 4.0L
$15.60Product Specifications- Notes: Centric Premium Oil & Grease Seal; Exc Vac Hubs;Centric Premium Oil & Grease Seal; Pulse Vac Hubs
- UPC: 805890575955
- Part Description: 2000 Ford Ranger Premium™ Front Wheel Seal
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$139.94Product Specifications- Notes: X-Tracker; w/o Pulse Vac Hub Locks
- Bolt Circle Diameter A: 4.470"
- Bolt Circle Diameter B: 4.10"
- Bolt Size: M12X1.5
- Flange Diameter: 5.8850"
- Flange Offset: 2.2170"
- Inner Diameter: 1.1110"
- Number of Bolts: 5
- Number of Holes: 3
- Number of Splines: 27
- Sensor Ring: No
- UPC: 085311355704
- Wheel Pilot Diameter: 2.770"
- Part Description: 2000 Ford Ranger Front Driver Side Wheel Bearing And Hub Assembly
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$14.81 MSRP:$21.27You Save: $6.46 (31%)Product Specifications- Notes: 4WD; Ranger; Left
- Location: Driver Side
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: F57Z-3254-BA
- Part Description: 2000 Ford Ranger Axle Seal
Vehicle Fitment- 2000 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$39.73Product Specifications- Bore: 42.0000 mm
- Cone Length: 39.0000 mm
- Cup Length: 1.5354"
- Design: GEN1
- Outer Diameter: 2.9921"
- Series: 513000
- Width: 1.5354"
- Part Description: 2000 Ford Ranger Rear Driver Side Wheel Bearing
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$96.84Product Specifications- Notes: w/Pulse Vac Hub Locks; Wheel Hub Assy; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced.
- Flange Diameter (Inch): 5.88
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.94
- Material: Steel
- Product Condition: New
- Spline Quantity: 42
- Stud Quantity: 5
- UPC: 029175923402
- Wiring Harness Included: No
- Part Description: 2000 Ford Ranger WHEEL BEARING AND HUB ASSEMBLY
Vehicle Fitment- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
- 2000 Ford Ranger | All Trims | 6 Cyl 4.0L
$31.64Product Specifications- Notes: Sealed
- Cone ID: 1.6535"
- Cone Length: 1.5354"
- Cup Length: 1.5354"
- Outer Diameter: 2.9920"
- UPC: 085311064804
- Width: 1.5354"
- Part Description: 2000 Ford Ranger Rear Sealed Wheel Bearing Kit
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$32.64Product Specifications- Notes: Axle Repair Bearing; with 7.5in Ring Gear;Axle Repair Bearing;Axle Repair Bearing; with 8.8in Ring Gear; with 28 Splines
- Part Description: 2000 Ford Ranger Rear Passenger Side Repair Wheel Bearing
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
- 2000 Ford Ranger | All Trims | 6 Cyl 4.0L
- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
SKF® Rear Wheel Seal for 2000 Ford Ranger
PartNumber: 16404$2.93Product Specifications- Notes: w/ 8.80" Ring Gear
- Bore: 2.575"
- Boretite: Yes
- Outer Diameter: 2.579"
- Shaft: 1.6180"
- UPC: 085311455039
- Width: 0.5"
- Part Description: 2000 Ford Ranger Rear Wheel Seal
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$12.32 MSRP:$17.68You Save: $5.36 (31%)Product Specifications- Notes: W/8.8" Axle
- Location: Driver Side; Passenger Side
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: E3TZ-1225-A
- Part Description: 2000 Ford Ranger Axle Shaft Bearing
Vehicle Fitment- 2000 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$82.48Product Specifications- Notes: Exc Pulse Vac Hub Locks; Wheel Hub Assy; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced.
- Flange Diameter (Inch): 5.885
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.941
- Material: Steel
- Product Condition: New
- Spline Quantity: 27
- Stud Quantity: 5
- UPC: 029175923143
- Wiring Harness Included: No
- Part Description: 2000 Ford Ranger WHEEL BEARING AND HUB ASSEMBLY
Vehicle Fitment- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
- 2000 Ford Ranger | All Trims | 6 Cyl 4.0L
$1.79Product Specifications- Inner Diameter: 2.8385"
- Outer Diameter: 3.1810"
- UPC: 085311436151
- Width: 0.0930"
- Part Description: 2000 Ford Ranger Front Wheel Bearing Lock Ring
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
National® Rear Passenger Side Standard Replacement Wheel Bearing for 2000 Ford Ranger
PartNumber: 6408$17.29Product Specifications- Notes: Standard Replacement Bearing; with 8.8in Ring Gear; with 31 Splines
- Type: NS
- Part Description: 2000 Ford Ranger Rear Passenger Side Standard Replacement Wheel Bearing
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$78.72Product Specifications- Notes: Exc Pulse Vac Hub Locks; Wheel Hub Assy; Axle Nut Torque Spec: The wheel hub & bearing are non- serviceable or non-adjustable. If the retaining nut is removed, the hub & bearing must be replaced; Superseded to WH515052
- Flange Diameter (Inch): 5.885
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.94
- Material: Steel
- Product Condition: New
- Spline Quantity: 27
- Stud Quantity: 5
- UPC: 029175923532
- Wiring Harness Included: No
- Part Description: 2000 Ford Ranger WHEEL BEARING AND HUB ASSEMBLY
Vehicle Fitment- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
- 2000 Ford Ranger | All Trims | 6 Cyl 4.0L
$16.97Product Specifications- Notes: w/Borg-Warner 1354 Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2000 Ford Ranger Front Outer Transfer Case Output Shaft Bearing
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$15.39 MSRP:$22.10You Save: $6.71 (31%)Product Specifications- Notes: W/7.5" Axle; Ranger
- Location: Driver Side; Passenger Side
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: E5SZ-1225-A
- Part Description: 2000 Ford Ranger Axle Housing Bearing
Vehicle Fitment- 2000 Ford Ranger | Base, Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$24.88Product Specifications- Notes: Wheel Bearing; Axle Nut Torque Spec: 240 ft-lbs / 325Nm
- Gasket or Seal Included: No
- Greaseable: No
- Hub Pilot Diameter (Inch): 2.992
- Material: Steel
- Product Condition: New
- UPC: 029175920128
- Part Description: 2000 Ford Ranger WHEEL BEARING
Vehicle Fitment- 2000 Ford Ranger | EV | All Engines
National® Rear Passenger Side Standard Replacement Wheel Bearing for 2000 Ford Ranger
PartNumber: 5707$16.46Product Specifications- Notes: Standard Replacement Bearing; with 7.5in Ring Gear;Standard Replacement Bearing; with 8.8in Ring Gear; with 28 Splines;w/Spicer 35-SLA Axle; w/7.59in Ring Gear
- Bore: 1.4016"
- Cylindrical inner Race: Non-separable
- Outer Diameter: 2.252"
- Type: NS
- Width: 0.698"
- Part Description: 2000 Ford Ranger Rear Passenger Side Standard Replacement Wheel Bearing
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$6.61Product Specifications- Notes: with Ford Axle; with 8.8in Ring Gear;with Ford Axle; with 7.5in Ring Gear
- Part Description: 2000 Ford Ranger Front Transfer Case Output Shaft Race
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$10.66Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone
- Part Description: 2000 Ford Ranger Front Passenger Side Inner Wheel Bearing and Race Set
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$5.65Product Specifications- Notes: w/Spicer 35-SLA Axle; w/7.59in Ring Gear
- Part Description: 2000 Ford Ranger Front Transfer Case Output Shaft Race
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$17.42 MSRP:$28.20You Save: $10.78 (39%)Product Specifications- Notes: Ranger
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.3 x 1.3 x 3.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: F67Z-1177-AC
- Part Description: 2000 Ford Ranger Axle Housing Seal
Vehicle Fitment- 2000 Ford Ranger | Base, Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$7.12Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone
- Part Description: 2000 Ford Ranger Front Driver Side Outer Wheel Bearing and Race Set
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
Centric® C-Tek™ Front Passenger Side Standard Driven Axle Bearing and Hub Assembly for 2000 Ford Ranger
PartNumber: 400.65007E$68.20Product Specifications- Notes: Pulse Vac Hubs
- UPC: 805890595540
- Part Description: 2000 Ford Ranger C-Tek™ Front Passenger Side Standard Driven Axle Bearing and Hub Assembly
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
SKF® Rear Wheel Seal for 2000 Ford Ranger
PartNumber: 13992$2.35Product Specifications- Notes: w/o Spicer 30 Axle
- Bore: 2.292"
- Boretite: Yes
- Outer Diameter: 2.296"
- Shaft: 1.3990"
- UPC: 826732651613
- Width: 0.469"
- Part Description: 2000 Ford Ranger Rear Wheel Seal
Vehicle Fitment- 2000 Ford Ranger | All Trims | 4 Cyl 2.5L
- 2000 Ford Ranger | All Trims | 6 Cyl 3.0L
- 2000 Ford Ranger | All Trims | 6 Cyl 4.0L
SKF® Front Wheel Seal for 2000 Ford Ranger
PartNumber: 19223$8.57Product Specifications- Bore: 2.578"
- Boretite: No
- Outer Diameter: 2.582"
- Shaft: 1.9380"
- UPC: 826732651071
- Width: 0.294"
- Part Description: 2000 Ford Ranger Front Wheel Seal
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
National® Wheel Seal for 2000 Ford Ranger
PartNumber: 330385$5.60Product Specifications- Notes: w/Borg-Warner 1354 Transfer Case; 2Spd; w/Part Time 4WD
- Type: 33
- UPC: 724956093410
- Part Description: 2000 Ford Ranger Wheel Seal
Vehicle Fitment- 2000 Ford Ranger | All Trims | All Engines
$19.79 MSRP:$28.42You Save: $8.63 (31%)Product Specifications- Notes: 2WD; Ranger; Outer; Bearing
- Location: Driver Side; Passenger Side
- Item Dimensions: 2.5 x 1.3 x 2.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Ford Ranger Outer Bearing
Vehicle Fitment- 2000 Ford Ranger | Base, Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
1-30 of 63 Results
< Previous
123
Next >