< Back ×
2001 Chevrolet Suburban 2500 Driveline, Axles & 4WD
My Vehicle Change Vehicle
2001 Chevrolet Suburban 2500
$32.86Product Specifications- Notes: BEARING ID / BORE: 1.5750 INCH / 40 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;w/o PLATE;w/o STUDS;Extd DUST SHIELD;
- Inside Diameter: 1.575"
- OE Part Number: 37520-ZL60A
- Plate: No
- Studs: No
- UPC: 081106060716
- Part Description: 2001 Chevrolet Suburban 2500 Driveshaft Center Support Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 8.1L
- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 6.0L
$208.40Product Specifications- Notes: Std Kit; 9.25" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311471206
- Width: 2.50"
- Part Description: 2001 Chevrolet Suburban 2500 Front Differential Rebuild Kit
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$95.60Product Specifications- Housing Material: Plastic
- OE Part Number: 26060073, 8-26060-073-0
- Package Contents: 4wd Actuator Assembly
- Terminal Quantity: 5
- Terminal Type: Blade
- UPC: 019495058922
- Wiring Harness Included: No
- Part Description: 2001 Chevrolet Suburban 2500 OE Solutions 4Wd Actuator
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
Dorman® OE Solutions Rear Passenger Side Axle Shaft for 2001 Chevrolet Suburban 2500
PartNumber: 630-149$229.74Product Specifications- Notes: 10.5" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 8
- Length: 38.98"
- Material: Carbon Steel
- OE Part Number: 12471329
- Spline Quantity: 30 Spline
- UPC: 019495227465
- Wheel Lug Quantity: 8
- Part Description: 2001 Chevrolet Suburban 2500 OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2001 Chevrolet Suburban 2500
PartNumber: 65-9306$338.03Product Specifications- Notes: with 37-3/8" (950 mm) Long Driveshaft;Measurement is taken from end of input shaft to center of U-Joint
- Greasable: No
- Length: 37.375"
- Length (mm): 950
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2001 Chevrolet Suburban 2500 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$12.23 MSRP:$22.22You Save: $9.99 (45%)Product Specifications- Notes: 8.6" Ring Rear; All Models; 8.50, 8.625
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.6 x 3.7 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26037309, 15522060
- Part Description: 2001 Chevrolet Suburban 2500 Axle Seal
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | Base, LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
$12.74Product Specifications- Notes: COMPAT w/SPICER SERIES: 1280, 1310, 1410;STYLE: SLIP YOKE; BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;COMPLETE MOUNT;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- Shape: Round
- UPC: 081106060563
- Part Description: 2001 Chevrolet Suburban 2500 Driveshaft Center Support Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 6.0L
$34.53Product Specifications- Notes: w/RPO Code NP8 (2Spd, Push Button Shift, Transfer Case); w/Push Button Control
- Attached Lead Wires: No Lead Wires Required
- Mounting Location: Dash
- OE Part Number: 15709327, 19168767
- Package Contents: 1 Switch
- Terminal Type: 12 Blade
- UPC: 019495214281
- Wiring Harness Included: No
- Part Description: 2001 Chevrolet Suburban 2500 OE Solutions 4Wd Switch
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$110.46Product Specifications- Notes: U-Shaped Bracket w/Mounting Block; w/ Studs In Bracket
- Bolt Hole Center: 6.616"
- Inside Diameter: 1.575"
- OE Part Number: F75Z4800BB
- Outside Diameter: 4.687"
- UPC: 085311419017
- Width: 1.850"
- Part Description: 2001 Chevrolet Suburban 2500 Driveshaft Center Support Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$43.30Product Specifications- Notes: Small Connector is 6 Way & Large Connector is 8 Way; w/RPO Code NP1 (2Spd, Electronic Shift, Transfer Case)
- Attached Lead Wires: No
- Large Connector: 8 Way
- Mounting Location: Dash
- OE Part Number: 15067877, 19168769
- Package Contents: 1 Switch
- Small Connector: 6 Way
- Terminal Type: 12 Blade
- UPC: 037495701174
- Wiring Harness Included: No
- Part Description: 2001 Chevrolet Suburban 2500 OE Solutions 4Wd Switch
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$113.70Product Specifications- Notes: Supplied with Standard Neoprene Outboard Boot
- ABS Ring Included: No
- Axle Nut Locking Type: Self Lock
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 21 11/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 33
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 36mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M24 x 2.0
- Part Description: 2001 Chevrolet Suburban 2500 Remanufactured CV Axle Assembly
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$386.98 MSRP:$703.62You Save: $316.64 (46%)Product Specifications- Other Names: Front Hub, Hub & Bearing
- Item Dimensions: 9.3 x 8.5 x 7.3 inches
- Item Weight: 18.20 Pounds
- Replaced by: 19419501
- Part Description: 2001 Chevrolet Suburban 2500 Front Hub
$92.51Product Specifications- Notes: Flat Bracket; w/ Studs In Bracket
- Bolt Hole Center: 6.614"
- Inside Diameter: 1.377"
- Outside Diameter: 4.299"
- UPC: 085311391689
- Width: 1.889"
- Part Description: 2001 Chevrolet Suburban 2500 Driveshaft Center Support Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$35.85Product Specifications- Notes: 9.5" Ring Gear
- Color/Finish: Black/Epoxy E-coat
- Differential Cover Bolt Count: 14
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: No Plug Required
- Differential Cover/Case Material: Low Carbon Steel
- Gasket Material: Not Applicable
- Gasket or Seal Included: No
- OE Part Number: 19133288
- UPC: 019495388210
- Part Description: 2001 Chevrolet Suburban 2500 OE Solutions Differential Cover
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 6.0L
$63.32Product Specifications- Notes: Incls Bearing & Support; w/1.5748in Bearing ID; w/40mm Bearing ID; Center To Center 2.228in; Center To Center 56.6mm; w/Spicer 1410 U-Joint(s)
- Part Description: 2001 Chevrolet Suburban 2500 Driveshaft Center Support Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
GMB® Grade Aluminum Coated Bearing Caps U-Joint for 2001 Chevrolet Suburban 2500
PartNumber: 219-0160$19.12Product Specifications- Notes: Grease Fitting in Cross; Coated for Alum Driveshaft
- Dimension: 1.188" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 4.0
- Lube Fitting Location: Grease Fitting in Cross
- UPC: 083286110779
- Weight (Gross Pounds): 1.80
- Width (Inch): 4.0
- Part Description: 2001 Chevrolet Suburban 2500 Grade Aluminum Coated Bearing Caps U-Joint
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 8.1L
$53.55Product Specifications- Notes: Repair; 9.50" Ring Gear
- Inside Diameter: 1.708"
- Outside Diameter: 3.088"
- UPC: 085311153201
- Width: 1.320"
- Part Description: 2001 Chevrolet Suburban 2500 Rear Axle Shaft Bearing Assembly
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
OEM (Genuine) 2001 Chevrolet Suburban 2500 Boot Kit, Front Wheel Drive Shaft Cv Joint
PartNumber: 19256071$104.98 MSRP:$182.69You Save: $77.71 (43%)Product Specifications- Notes: All Models; 1/2 Ton; W/O Crew Cab
- Item Dimensions: 6.4 x 6.3 x 5.7 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26069246, 15868187
- Part Description: 2001 Chevrolet Suburban 2500 Boot Kit, Front Wheel Drive Shaft Cv Joint
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | Base, LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
$4.68Product Specifications- Notes: 8 Bolt;Size- 2-23/32in x 4-7/16in;Rear
- Bolt Hole Quantity: 8
- Complete: Y
- Contains Applications: Y
- Meets or Exceeds OEM Specs: Y
- Release Wave: 12/15/2017
- Shape: Round
- Thickness: 0.025
- UPC: 023913681265
- Part Description: 2001 Chevrolet Suburban 2500 Rear Axle Shaft Flange Gasket
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 6.0L
- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 8.1L
$48.72Product Specifications- Notes: w/New Process 261C Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2001 Chevrolet Suburban 2500 Differential Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$33.39Product Specifications- Notes: w/RPO Code NP1 (2Spd, Electronic Shift, Transfer Case)
- Attached Lead Wires: No Lead Wires Required
- Mounting Location: Dash
- OE Part Number: 15063844, 15972170, 19168768
- Package Contents: 1 Switch
- Terminal Type: 12 Blade
- UPC: 019495229988
- Wiring Harness Included: No
- Part Description: 2001 Chevrolet Suburban 2500 OE Solutions 4Wd Switch
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$18.63Product Specifications- Notes: Grease Fitting in Cross; Coated for Alum Driveshaft
- Bearing Cap Diameter: 1.188"
- Bearing Cap Type: Plain
- Finish: Aluminum Coating
- Height: 1.3"
- Length: 4"
- Length Axis 1: 3.62"
- Length Axis 2: 3.62"
- Lock Ring Size: 3.624"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- Material: Steel
- Type: Greasable
- UPC: 083286110786
- Width: 4"
- Part Description: 2001 Chevrolet Suburban 2500 Grade Coated™ Rear U-Joint
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 6.0L
$63.01Product Specifications- Notes: U-Shaped Bracket w/o Mounting Block; w/ Studs In Bracket
- Bolt Hole Center: 6.622"
- Inside Diameter: 1.574"
- Mounting Block: No
- Outside Diameter: 7.756"
- UPC: 085311399555
- Width: 1.850"
- Part Description: 2001 Chevrolet Suburban 2500 Driveshaft Center Support Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$105.48 MSRP:$174.58You Save: $69.10 (40%)Product Specifications- Notes: Suburban, Yukon Xl; 1/2 Ton; 2WD
- Other Names: Universal Joints
- Item Dimensions: 4.1 x 4.2 x 1.6 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12476136, 15577432, 12543576, 12472402
- Part Description: 2001 Chevrolet Suburban 2500 Universal Joints
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
$26.80Product Specifications- Notes: 10.5" Ring Gear
- Color/Finish: Gray
- Differential Cover Bolt Count: 14
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: No
- Differential Cover/Case Material: Low Carbon Steel
- Gasket Material: Not Applicable
- Gasket or Seal Included: No
- OE Part Number: 12471311, 26067040
- UPC: 019495115991
- Part Description: 2001 Chevrolet Suburban 2500 OE Solutions Differential Cover
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$29.93Product Specifications- Notes: w/New Process 261C Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2001 Chevrolet Suburban 2500 Driveshaft Center Support Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$36.28Product Specifications- Notes: 8,600 lb GVW;9.50" Ring Gear
- Cone ID: 2.1654"
- Cone Length: 0.905"
- Cone Radius: 0.14"
- Cup Length: 0.807"
- Cup Radius: 0.02"
- Outside Diameter: 3.543"
- UPC: 085311885607
- Width: 0.984"
- Part Description: 2001 Chevrolet Suburban 2500 Rear Axle Shaft Bearing Kit
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
$15.06Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.188"
- Lock Ring Size: 4.185"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286351608
- Part Description: 2001 Chevrolet Suburban 2500 Grade Performance™ Front U-Joint
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | 8 Cyl 8.1L
$35.60Product Specifications- Notes: 9.50'' Ring Gear 2nd Design
- Cone ID: 1.875"
- Cone Length: 1.156"
- Cone Radius: 0.14"
- UPC: 085311071383
- Width: 1.187"
- Part Description: 2001 Chevrolet Suburban 2500 Rear Inner Axle Shaft Bearing
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | All Trims | All Engines
- $105.48 MSRP:
$174.58You Save: $69.10 (40%)Product Specifications- Notes: Suburban, Yukon Xl; 1/2 Ton; 2WD
- Other Names: Universal Joints
- Item Dimensions: 4.1 x 4.2 x 1.6 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12476136, 15577432, 12543576, 12472402
- Part Description: 2001 Chevrolet Suburban 2500 Universal Joints
Vehicle Fitment- 2001 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
1-30 of 208 Results
< Previous
12345
Next >