< Back ×
2002 Ford Escape Driveline, Axles & 4WD
My Vehicle Change Vehicle
2002 Ford Escape
$37.62Product Specifications- Notes: BEARING ID / BORE: 1.1811 INCH / 30 MM;CENTERLINE: 1.50 INCH / 38 MM;MOUNT WIDTH: 7.00 INCH / 178 MM;STYLE: ROUND FRAME;w/WINGS;
- Inside Diameter: 1.181"
- OE Part Number: 2L8Z-4R602BA
- Shape: Round
- UPC: 081106060761
- Part Description: 2002 Ford Escape Driveshaft Center Support Bearing
Vehicle Fitment- 2002 Ford Escape | All Trims | 4 Cyl 2.0L
- 2002 Ford Escape | All Trims | 6 Cyl 3.0L
$224.30Product Specifications- Notes: Master Kit; Dana 28 Axle
- Inner Diameter: 11.50"
- Outer Diameter: 11.0"
- UPC: 085311543064
- Width: 2.50"
- Part Description: 2002 Ford Escape Rear Master Differential Rebuild Kit
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$87.55Product Specifications- ABS Ring Included: Yes
- ABS Ring Tooth Count: 44
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 23
- Length: 31 7/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 26
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2002 Ford Escape Remanufactured CV Axle Assembly
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$75.48Product Specifications- Bracket Material: Steel
- Inside Diameter: 1.181"
- Installation Hardware Included: Not Required
- Installation Instructions Included: No
- Mounting Bracket Included: Yes
- Mounting Hole Quantity: 2
- OE Part Number: 7L8Z-4R602-B, 2L8Z4R602BA, 3L8Z4R602BA, 5L8Z4R602BA, 6L8Z4R602B
- Support Bearing Type: Housing Mounted Bearing
- UPC: 019495296768
- Width: 6.75"
- Part Description: 2002 Ford Escape OE Solutions Driveshaft Center Support Bearing
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$157.22Product Specifications- Additional Contents: Gasket Maker, Boot Clamp, Snap Ring
- Bolt Circle Diameter: 3.383"
- Bolt Diameter: 0.346"
- Bolt Hole Quantity: 6
- Bolt Thread Sizes: M8 X 1.25
- Color/Finish: Natural
- Grease Included: Yes
- Housing Outside Diameter (in): 3.931"
- Housing Thickness (in): 1.653"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Steel
- Spline Count: 26
- Spline Diameter (In): 1.06"
- Spline Length (In): 1.528"
- UPC: 019495272403
- Part Description: 2002 Ford Escape OE Solutions Propeller Shaft Cv Joint Kit
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$20.17 MSRP:$34.80You Save: $14.63 (43%)Product Specifications- Notes: 4 Wheel Drive, Drum Brakes
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly, Axle Nut
- Item Dimensions: 3.2 x 2.7 x 3.4 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: -W705967-S426, -W705967-S439
- Part Description: 2002 Ford Escape Axle Nut
Vehicle Fitment- 2002 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2002 Ford Escape Grade Performance™ Rear U-Joint
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$99.61Product Specifications- ABS Ring Included: No
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 34 + 1 Blank
- Length: 22 1/16" to 22 7/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2002 Ford Escape Remanufactured CV Axle Assembly
Vehicle Fitment- 2002 Ford Escape | All Trims | 4 Cyl 2.0L
$22.04Product Specifications- Notes: Uni-Fit; Joint Dia 3.3"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.3"
- Boot Color: Grey
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.3"
- Material: Silicone
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.87"
- Split Or Solid Type: Solid
- UPC: 019495615323
- Vented Boot: No
- Part Description: 2002 Ford Escape OE Solutions Inner Cv Joint Boot Kit
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$211.90Product Specifications- Notes: Bearing & Support
- Bolt Hole Center: 6.909"
- Inside Diameter: 1.181"
- Outside Diameter: 4.448"
- UPC: 085311522281
- Width: 2.795"
- Part Description: 2002 Ford Escape Driveshaft Center Support Bearing
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$16.19Product Specifications- Notes: Brute Force Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099226
- Part Description: 2002 Ford Escape Front Greaseable U Joint
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
- $20.17 MSRP:
$34.80You Save: $14.63 (43%)Product Specifications- Notes: 4 Wheel Drive, Drum Brakes
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly, Axle Nut
- Item Dimensions: 3.2 x 2.7 x 3.4 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: -W705967-S426, -W705967-S439
- Part Description: 2002 Ford Escape Axle Nut
Vehicle Fitment- 2002 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$9.48Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 2002 Ford Escape Spicer 1310 Series Grade Standard U-Joint
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$87.44Product Specifications- ABS Ring Included: No
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 23
- Length: 33 1/2"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 26
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2002 Ford Escape Remanufactured CV Axle Assembly
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$6.80Product Specifications- Notes: Fits {210-0153} C-clip;1/4-28 Bolts
- Bolt Length: 1/4-28"
- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 083286108196
- Width (Inch): 3.50
- Part Description: 2002 Ford Escape Universal Joint Strap Kit
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
- 2002 Ford Escape | All Trims | 6 Cyl 3.0L
$16.91Product Specifications- Notes: Uni-Fit; Joint Dia 3.85";Uni-Fit; Joint Dia 3.85"; Packaging Type: Box; Pkg Quantity: 1
- Grease Type: Non-synthetic
- Joint End Inside Diameter (In): 3.58"
- Material: Neoprene
- Number of Clamps: 2
- Shaft End Inside Diameter (In): 0.93"
- UPC: 019495615170
- Part Description: 2002 Ford Escape OE Solutions Front Outer Cv Joint Boot Kit
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$549.34Product Specifications- Notes: with 30-1/2" (774 mm) Long Driveshaft;Front Section of 2 Piece Driveshaft;Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: No
- Length: 30.5"
- Length (mm): 774
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2002 Ford Escape Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$43.77 MSRP:$69.82You Save: $26.05 (38%)Product Specifications- Notes: Escape, Mariner
- Location: Driver Side; Passenger Side
- Other Names: Bearing, Inner Bearing, Wheel Bearings
- Item Dimensions: 8.5 x 7.7 x 7.6 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Ford Escape Inner Bearing
Vehicle Fitment- 2002 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$14.98Product Specifications- Cone ID: 1.312"
- Cone Length: 0.875"
- Cone Radius: 0.03"
- Cup Length: 0.687"
- Cup Radius: 0.06"
- Outside Diameter: 2.687"
- UPC: 826732222462
- Width: 0.875"
- Part Description: 2002 Ford Escape Outer Axle Shaft Bearing Kit
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$21.60Product Specifications- Notes: Brute Force Non Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099219
- Part Description: 2002 Ford Escape Front Non Greaseable U Joint
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$99.61Product Specifications- ABS Ring Included: Yes
- ABS Ring Tooth Count: 44
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 34 + 1 Blank
- Length: 22 1/16" to 22 7/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2002 Ford Escape Remanufactured CV Axle Assembly
Vehicle Fitment- 2002 Ford Escape | All Trims | 4 Cyl 2.0L
SKF® Front U Joint for 2002 Ford Escape
PartNumber: UJ369$12.06Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099677
- Part Description: 2002 Ford Escape Front U Joint
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$94.07Product Specifications- ABS Ring Included: Yes
- ABS Ring Tooth Count: 44
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 34 + 1 Blank
- Length: 21 1/8" to 21 1/2"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 30mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M20 x 1.5
- Part Description: 2002 Ford Escape Remanufactured CV Axle Assembly
Vehicle Fitment- 2002 Ford Escape | All Trims | 4 Cyl 2.0L
- 2002 Ford Escape | All Trims | 6 Cyl 3.0L
$49.27 MSRP:$81.45You Save: $32.18 (40%)Product Specifications- Notes: 2 Wheel Drive, Drum Brakes; 4 Wheel Drive, Drum Brakes; Escape, Mariner
- Location: Driver Side; Passenger Side
- Other Names: Bearing Assembly, Wheel Bearings
- Item Dimensions: 3.2 x 2.7 x 3.4 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Ford Escape Bearing Assembly
Vehicle Fitment- 2002 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
$81.74Product Specifications- ABS Ring Included: Yes
- ABS Ring Tooth Count: 44
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 35
- Length: 26 1/16" to 26 7/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 30mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M20 x 1.5
- Part Description: 2002 Ford Escape Remanufactured CV Axle Assembly
Vehicle Fitment- 2002 Ford Escape | All Trims | 4 Cyl 2.0L
- 2002 Ford Escape | All Trims | 6 Cyl 3.0L
$87.26Product Specifications- ABS Ring Included: Yes
- ABS Ring Tooth Count: 44
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 23
- Length: 33 1/2"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 26
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2002 Ford Escape Remanufactured CV Axle Assembly
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$4.97Product Specifications- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 031447983007
- Width (Inch): 3.50
- Part Description: 2002 Ford Escape Universal Joint U-Bolt Kit
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
SKF® Axle Shaft Seal for 2002 Ford Escape
PartNumber: 13757$12.21Product Specifications- Bore: 2.282"
- Boretite: No
- Outside Diameter: 2.287"
- Shaft: 1.380"
- UPC: 085311283625
- Width: 0.354"
- Part Description: 2002 Ford Escape Axle Shaft Seal
Vehicle Fitment- 2002 Ford Escape | All Trims | All Engines
$87.55Product Specifications- ABS Ring Included: No
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 35
- Length: 26 1/16" to 26 7/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 30mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M20 x 1.5
- Part Description: 2002 Ford Escape Remanufactured CV Axle Assembly
Vehicle Fitment- 2002 Ford Escape | All Trims | 4 Cyl 2.0L
- 2002 Ford Escape | All Trims | 6 Cyl 3.0L
$245.16 MSRP:$364.83You Save: $119.67 (33%)Product Specifications- Notes: 2.0 Liter, Auto Trans, 4WD; 2.0 Liter, Auto Trans; 3.0 Liter, 4WD; 3.0 Liter; Escape, Mariner; 2.0l; Auto Trans; 4WD;Escape, Mariner; 3.0l; 4WD
- Location: Driver Side
- Item Dimensions: 4.9 x 4.9 x 22.5 inches
- Item Weight: 8.10 Pounds
- Replaces: 5L8Z-3A329-D, YL8Z-3A329-CA, YL8Z-3A329-EA, 6L8Z-3A329-A
- Part Description: 2002 Ford Escape Intermed Shaft
Vehicle Fitment- 2002 Ford Escape | Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
1-30 of 106 Results
< Previous
1234
Next >