< Back ×
2003 Jeep Grand Cherokee Driveline, Axles & 4WD
My Vehicle Change Vehicle
2003 Jeep Grand Cherokee
$344.85Product Specifications- Notes: Dana 44 Axle; Vari-Lok; Quadra Drive
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 32.36"
- Material: Carbon Steel
- OE Part Number: 5012873AA
- Spline Quantity: 30 Spline
- UPC: 019495147053
- Wheel Lug Quantity: 5
- Part Description: 2003 Jeep Grand Cherokee OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$174.41Product Specifications- Notes: Master Kit; Dana 35 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499446
- Width: 2.50"
- Part Description: 2003 Jeep Grand Cherokee Rear Master Differential Rebuild Kit
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$291.91Product Specifications- Notes: Dana 35 Axle
- ABS Tone Ring Installed: Yes
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 31.75"
- Material: Carbon Steel
- OE Part Number: 5012821AA
- Spline Quantity: 27 Spline
- UPC: 019495126157
- Wheel Lug Quantity: 5
- Part Description: 2003 Jeep Grand Cherokee OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2003 Jeep Grand Cherokee
PartNumber: 65-9767$564.05Product Specifications- Notes: with 33-1/2" (851 mm) Long Driveshaft;Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: Yes
- Length: 33.5"
- Length (mm): 851
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2003 Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | 6 Cyl 4.0L
$151.92Product Specifications- Notes: Master Kit; Dana 44 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487146
- Width: 2.50"
- Part Description: 2003 Jeep Grand Cherokee Rear Master Differential Rebuild Kit
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$9.65 MSRP:$14.10You Save: $4.45 (32%)Product Specifications- Item Dimensions: 9.1 x 7.1 x 5.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5010884AC, 5010884AA, 4318025, J8993317, MD997740
- Part Description: 2003 Jeep Grand Cherokee *SEALER-None
Vehicle Fitment- 2003 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8, Special Edition, Sport | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
$208.48Product Specifications- Notes: Dana 44 Axle; Vari-Lok; Quadra Drive
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.37"
- Material: Carbon Steel
- OE Part Number: 5012872AA
- Spline Quantity: 30 Spline
- UPC: 019495531982
- Wheel Lug Quantity: 5
- Part Description: 2003 Jeep Grand Cherokee OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$48.72Product Specifications- Type: A-1
- Part Description: 2003 Jeep Grand Cherokee Differential Bearing
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2003 Jeep Grand Cherokee
PartNumber: 65-9781$555.71Product Specifications- Notes: with 31-7/8" (810 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: Yes
- Length: 31.875"
- Length (mm): 810
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2003 Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | 8 Cyl 4.7L
Dorman® OE Solutions Front Rearward Propeller Shaft Cv Joint Kit for 2003 Jeep Grand Cherokee
PartNumber: 932-301$144.19Product Specifications- Notes: Propeller Shaft
- Additional Contents: Boot Clamp, Snap Ring
- Bolt Circle Diameter: 3.395"
- Bolt Diameter: 0.345"
- Bolt Hole Quantity: 6
- Bolt Thread Sizes: M8 X 1.25
- Color/Finish: Natural
- Grease Included: Yes
- Housing Outside Diameter (in): 3.93"
- Housing Thickness (in): 1.18"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Steel
- Spline Count: 25
- Spline Diameter (In): 1.015"
- Spline Length (In): 0.96"
- UPC: 019495272410
- Part Description: 2003 Jeep Grand Cherokee OE Solutions Front Rearward Propeller Shaft Cv Joint Kit
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$23.89Product Specifications- Notes: w/New Process 247J Transfer Case; 2Spd; Full Time 4WD;w/New Process 242J Transfer Case; 2Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2003 Jeep Grand Cherokee Driveshaft Center Support Bearing
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
- $9.65 MSRP:
$14.10You Save: $4.45 (32%)Product Specifications- Item Dimensions: 9.1 x 7.1 x 5.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5010884AC, 5010884AA, 4318025, J8993317, MD997740
- Part Description: 2003 Jeep Grand Cherokee *SEALER-None
Vehicle Fitment- 2003 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8, Special Edition, Sport | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
$106.95Product Specifications- Notes: Std; Dana 44 Axle:;Standard Kit; Dana 44 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470766
- Width: 2.50"
- Part Description: 2003 Jeep Grand Cherokee Rear Differential Rebuild Kit
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2003 Jeep Grand Cherokee
PartNumber: 65-3004$325.03Product Specifications- Notes: with 34" (864 mm) Long Driveshaft;Measurement taken from end of CV Joint Flange Face to end of Flange Face; Supplied as new
- Greasable: No
- Length: 34"
- Length (mm): 864
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2003 Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | 8 Cyl 4.7L
$23.06Product Specifications- Notes: Spicer 35 Axle
- Cone ID: 1.406"
- Outside Diameter: 2.844"
- UPC: 085311256551
- Width: 1.218"
- Part Description: 2003 Jeep Grand Cherokee Inner Axle Shaft Bearing Kit
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
Dorman® OE Solutions Front Forward Propeller Shaft Cv Joint Kit for 2003 Jeep Grand Cherokee
PartNumber: 932-302$146.07Product Specifications- Notes: Propeller Shaft
- Additional Contents: Boot Clamp, Snap Ring
- Bolt Circle Diameter: 3.402"
- Bolt Diameter: 0.347"
- Bolt Hole Quantity: 6
- Bolt Thread Sizes: M8 X 1.25
- Color/Finish: Natural
- Grease Included: Yes
- Housing Outside Diameter (in): 3.852"
- Housing Thickness (in): 1.573"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Steel
- Spline Count: 25
- Spline Diameter (In): 1.014"
- Spline Length (In): 1.653"
- UPC: 019495272427
- Part Description: 2003 Jeep Grand Cherokee OE Solutions Front Forward Propeller Shaft Cv Joint Kit
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$15.40Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; w/Selec-Trac Transfer Case
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 2003 Jeep Grand Cherokee Grade Performance™ Rear U-Joint
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | 8 Cyl 4.7L
$26.32 MSRP:$38.95You Save: $12.63 (33%)Product Specifications- Notes: 4WD, 2000-04
- Location: Driver Side; Passenger Side
- Other Names: Axle Seal, Inner Seal, Seal, Slinger, Slinger Seal
- Item Dimensions: 0.9 x 2.6 x 2.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2003 Jeep Grand Cherokee Seal-Axle Drive Shaft
Vehicle Fitment- 2003 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, Overland, SE, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
$20.58Product Specifications- Notes: w/Spicer 35 Axle; w/7.59in Ring Gear
- Part Description: 2003 Jeep Grand Cherokee Front Inner Differential Pinion Bearing
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
Dorman® OE Solutions U Bolt Type Differential End Yoke for 2003 Jeep Grand Cherokee
PartNumber: 697-544$159.31Product Specifications- Notes: U-Bolt Type; Dana 44 Axle; Dana 60 Axle; 1310 U-Joint; Dana 70 Axle; 29 Spline
- Color: Silver
- Inside Diameter: 1.18"
- Length: 3.63"
- Material: Carbon Steel
- Mounting Hardware Included: No
- Mounting Hole Diameter: 0.331"
- Mounting Hole Quantity: 4
- Package Contents: 1 Differential End Yoke
- Spline Quantity: 29
- U Bolt(s) Included: No
- Universal Joint(s) Included: No
- UPC: 037495173353
- Width: 3"
- Part Description: 2003 Jeep Grand Cherokee OE Solutions U Bolt Type Differential End Yoke
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$17.16Product Specifications- Cone ID: 1.375"
- Cone Length: 1"
- Cone Radius: 0.09"
- OE Part Number: 8970844670, 9036634019, 0019816905, C0DW4625A, 3156066, XW3706, 1549628, 926803, C0WD4625A, COWD4625A, 79192186, 5086690AA, 90368-34049, 9759HM88649, 33 12 1 468 894, 1-206-573, 2070079, 8729113, N058570, C0WD4630A, 2070070, 1L2Z1201AA, 1-204-304, 1458HM8
- UPC: 085311056199
- Width: 1"
- Part Description: 2003 Jeep Grand Cherokee Front Outer Axle Shaft Bearing
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; w/o Selec-Trac Transfer Case;Grease Fitting in Cross; Perf Grade; w/Selec-Trac Transfer Case;Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2003 Jeep Grand Cherokee Grade Performance™ Rear U-Joint
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
- 2003 Jeep Grand Cherokee | All Trims | 6 Cyl 4.0L
- 2003 Jeep Grand Cherokee | All Trims | 8 Cyl 4.7L
$18.65Product Specifications- Notes: w/Spicer 44 Axle; w/8.5in Ring Gear
- UPC: 724956020683
- Part Description: 2003 Jeep Grand Cherokee Front Outer Differential Pinion Bearing
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$106.14 MSRP:$159.00You Save: $52.86 (34%)Product Specifications- Notes: Grand Cherokee; Grand Cherokee; Dana Model 44
- Item Dimensions: 11.4 x 7.6 x 2.2 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5086780AB
- Part Description: 2003 Jeep Grand Cherokee Bearing-Drive Pinion
Vehicle Fitment- 2003 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
$67.77Product Specifications- Notes: Dana 44 Axle; Sales Code DRK; 226 mm
- Color/Finish: Black/Epoxy E-coat
- Differential Cover Bolt Count: 10
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: Yes
- Differential Cover/Case Material: Steel
- Gasket Material: Not Applicable
- Gasket or Seal Included: No
- OE Part Number: 5012842AA
- UPC: 019495256250
- Part Description: 2003 Jeep Grand Cherokee OE Solutions Differential Cover
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$16.92Product Specifications- Notes: Dana 30 Axle;Dana 35 Axle
- Cone ID: 1.625"
- Cone Length: 0.78"
- Cone Radius: 0.14"
- Cup Length: 0.653"
- Cup Radius: 0.03"
- OE Part Number: 9759BR72
- Outside Diameter: 2.891"
- UPC: 085311281898
- Width: 0.843"
- Part Description: 2003 Jeep Grand Cherokee Rear Axle Shaft Bearing Kit
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$13.41Product Specifications- Notes: w/Spicer 30-SF Axle; w/7.125in Ring Gear;w/Spicer 35 Axle; w/7.59in Ring Gear
- Part Description: 2003 Jeep Grand Cherokee Differential Bearing
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
$10.55Product Specifications- Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross; w/Selec-Trac Transfer Case
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Type: Plain
- Greasable: Yes
- Length Axis 1: 3.62
- Length Axis 2: 3.62
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Style: 4 Round Plain Bearings
- Universal Joint Style: Spicer 1330
- UPC: 083286002135
- Width: 3.622" Overall Axis
- Part Description: 2003 Jeep Grand Cherokee Grade Standard U-Joint
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | 8 Cyl 4.7L
$57.46Product Specifications- Notes: Dana 35 Axle
- Color/Finish: Black/Epoxy E-coat
- Differential Cover Bolt Count: 10
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: Yes
- Differential Cover/Case Material: Steel
- Gasket Material: Not Applicable
- Gasket or Seal Included: No
- OE Part Number: 5012811AA
- UPC: 019495256243
- Part Description: 2003 Jeep Grand Cherokee OE Solutions Differential Cover
Vehicle Fitment- 2003 Jeep Grand Cherokee | All Trims | All Engines
- $106.14 MSRP:
$159.00You Save: $52.86 (34%)Product Specifications- Notes: Grand Cherokee; Grand Cherokee; Dana Model 44
- Item Dimensions: 11.4 x 7.6 x 2.2 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5086780AB
- Part Description: 2003 Jeep Grand Cherokee Bearing-Drive Pinion
Vehicle Fitment- 2003 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
1-30 of 169 Results
< Previous
12345
Next >