Notes: with 21" Long Driveshaft;with 33-1/2" (851 mm) Long Driveshaft;Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new;Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
Greasable: Yes
Length: 33.5"
Length (mm): 851
Material: Steel
Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 2004 Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
Part Description: 2004 Jeep Grand Cherokee *SEALER-None
More Info
Vehicle Fitment
2004 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8, Special Edition, Sport | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
Notes: w/New Process 247J Transfer Case; 2Spd; Full Time 4WD;w/New Process 147J Transfer Case; 1Spd; Full Time 4WD;w/New Process 242J Transfer Case; 2Spd; Full Time 4WD
Bore (Inch): 1.378
Bore (mm): 35.00
Design: Single Row Radial
Inner Race Bore (Inch): 1.378
Inner Race Bore (mm): 35.00
Inner Race Radius (Inch): 0.040
Inner Race Radius (mm): 1.020
Inner Race Width (Inch): 0.669
Inner Race Width (mm): 17.00
Outer Race Outside Diameter (Inch): 2.835
Outer Race Outside Diameter (mm): 72.00
Outer Race Radius (Inch): 0.040
Outer Race Radius (mm): 1.020
Outer Race Width (Inch): 0.669
Outer Race Width (mm): 17.00
Outside Diameter (Inch): 2.835
Outside Diameter (mm): 72.00
Series: 200
Type: A-1
Width (Inch): 0.669
Width (mm): 17.00
Part Description: 2004 Jeep Grand Cherokee Driveshaft Center Support Bearing
More Info
Vehicle Fitment
2004 Jeep Grand Cherokee | All Trims | All Engines
Part Description: 2004 Jeep Grand Cherokee *SEALER-None
More Info
Vehicle Fitment
2004 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8, Special Edition, Sport | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
Notes: Grease Fitting in Cross; Perf Grade; w/Selec-Trac Transfer Case;Grease Fitting in Cross; Perf Grade;Grease Fitting in Cross; Perf Grade; w/o Selec-Trac Transfer Case
Bearing Cap Diameter: 1.063"
Lock Ring Size: 3.220"
Lock Ring Type: External
Lubrication Method: Grease Fitting in Cross
UPC: 083286501539
Part Description: 2004 Jeep Grand Cherokee Grade Performance™ Rear U-Joint
More Info
Vehicle Fitment
2004 Jeep Grand Cherokee | All Trims | All Engines
Other Names: Axle Seal, Inner Seal, Seal, Slinger, Slinger Seal
Item Dimensions: 0.9 x 2.6 x 2.6 inches
Item Weight: 0.40 Pounds
Fitment Type: Direct Replacement
Part Description: 2004 Jeep Grand Cherokee Seal-Axle Drive Shaft
More Info
Vehicle Fitment
2004 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, Overland, SE, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
Notes: Grand Cherokee; Grand Cherokee; Dana Model 44
Item Dimensions: 11.4 x 7.6 x 2.2 inches
Item Weight: 2.10 Pounds
Fitment Type: Direct Replacement
Replaces: 5086780AB
Part Description: 2004 Jeep Grand Cherokee Bearing-Drive Pinion
More Info
Vehicle Fitment
2004 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
Notes: Grand Cherokee; Grand Cherokee; Dana Model 44
Item Dimensions: 11.4 x 7.6 x 2.2 inches
Item Weight: 2.10 Pounds
Fitment Type: Direct Replacement
Replaces: 5086780AB
Part Description: 2004 Jeep Grand Cherokee Bearing-Drive Pinion
More Info
Vehicle Fitment
2004 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS