< Back ×
2004 Toyota MR2 Spyder Cooling Systems, Fans, Radiators & Components
My Vehicle Change Vehicle
2004 Toyota MR2 Spyder
$57.84Product Specifications- Housing: Cast Aluminum
- Impeller Material: Stamped Steel
- Rotation of Impeller: Reverse
- Timing Belt Driven: No
- UPC: 072053784923
- Part Description: Engine Coolant Standard Water Pump
$129.06Product Specifications- Color: Black
- Connector Quantity: 1
- Connector Type: Male
- Fan Blade Material: Plastic
- Fan Quantity: 2
- Mounting Bracket Included: No
- OE Part Number: 16361-22050, 16361-22060, 16363-22050, 16363-22060, 16711-22060
- Package Contents: Radiator Fan Assembly
- Shroud Included: Yes
- Shroud Material: Plastic
- Terminal Quantity: 2
- UPC: 019495037712
- Part Description: Engine Cooling Fan Assembly
$25.10Product Specifications- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Square
- Mounting Type: Threaded Nut
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 689604101254
- Wiring Harness Included: No
- Part Description: Coolant Temperature Sensor
$52.88Product Specifications- Notes: Serpentine Belt Driven
- UPC: 036687992536
- Part Description: Engine Coolant Water Pump
$174.17Product Specifications- Blade Material: Plastic
- Blade Material B : Plastic
- Blade Type: Rigid
- Connector B Gender: Female
- Connector B Type: Spade
- Connector Gender: Female
- Connector qty: 2
- Connector Type: 2 wire lead w/ Connector
- Electrical or Mechanical: Electrical
- Fan 1 Blade Quantity: 5
- Fan 2 Blade Quantity: 5
- Fan Clutch Mounted: Fan clutch not mounted within the assembly.
- Fan Quantity: 2
- Height IN: 18.750
- Housing Finish: Black
- Hub Bolt Hole Quantity: OE Mount
- Material: Plastic / Metal
- Motor Type A: Radiator Fan Assembly
- Mount Type: OE mount
- Mounting Hardware: Not Included
- O.E. Replacement: Yes
- Performance Rated: Yes
- Shroud Included: Included
- Shroud Material: Plastic
- Style: Radiator Fan, Condenser Fan
- Terminal Gender: Male
- Terminal Quantity: 2
- UPC: 096361756564
- Voltage: 12
- Width IN: 29.250
- Part Description: Dual Radiator And Condenser Fan Assembly
$6.27 MSRP:$9.02You Save: $2.75 (31%)Product Specifications- Notes: Mr2
- Other Names: Thermostat Housing Gasket; Water Inlet Seal; Gasket, Water Inlet Housing, NO.1
- Item Dimensions: 2.8 x 2.6 x 0.2 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16325-0H020
- Part Description: Water Inlet Seal
$20.14Product Specifications- Notes: 82 Deg C (180 Deg F) OE Temp Thermostat
- Part Description: Engine Coolant Thermostat
$10.34Product Specifications- Notes: Cover
- Air Vent (Bleeder Valve): No
- Bolt Hole Diameter: 0.313"
- Bolt Hole Quantity: 2
- Bolts Included: No
- Color/Finish: Black
- Gasket or Seal Included: No
- Housing Neck Angle (°): 15 Degree
- Material: Plastic
- O Rings Included: Not Required
- OE Part Number: 1632122070
- Outlet Diameter: 1.25"
- Thermostat Included: No
- UPC: 885484543829
- Part Description: Engine Coolant Thermostat Housing
$13.38Product Specifications- Notes: Pkg Quantity: 2
- Material: Rubber
- OE Part Number: 16523-74010
- Package Contents: 1 Radiator Mount Bushing
- UPC: 037495931137
- Part Description: Radiator Mount Bushing
$5.07Product Specifications- Notes: O-Ring
- Part Description: Engine Coolant Thermostat Seal
$14.84Product Specifications- Notes: Grade: Aftermarket; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
- Height [mm]: 19
- Housing Colour: Green
- Length [mm]: 60
- Number of Poles: 2
- Packaging Depth [cm]: 6,8
- Packaging height [cm]: 6,7
- Packaging width [cm]: 4
- Supplementary Article/Info 2: with seal ring
- Supplementary Article/Supplementary Info: with seal
- Thread Size: M12x1,5
- Weight [kg]: 0,03177
- Width [mm]: 19
- Part Description: Engine Coolant Temperature Sensor
$21.92 MSRP:$31.59You Save: $9.67 (31%)Product Specifications- Notes: Mr2; From 07-00
- Other Names: Water Inlet
- Item Dimensions: 2.2 x 0.9 x 1.9 inches
- Item Weight: 1.60 Pounds
- Replaces: 90916-03129, 90916-03084
- Part Description: Water Inlet
$10.46Product Specifications- Notes: Technology w/Vision
- Part Description: Engine Coolant Temperature Sensor
$33.17Product Specifications- Housing Material: Aluminum
- Hub Height: 2.76 in
- Hub Pilot Diameter: 3.54 in
- Impeller Material: Metal
- Impeller Rotation: Reverse
- Pulley Type: Serpentine Belt
- UPC: 826732757742
- Water Pump Drive Type: Serpentine Belt
- Part Description: Engine Coolant Water Pump
$98.15Product Specifications- Notes: Universal Fit Super Duty Electric Pusher Primary Fan. Incls mounting hardware. Controls not Incld.
- Depth IN: 2.56"
- Dia. IN: 12.000
- Fan Quantity: 1
- Material: Plastic
- Mounting Hardware: Included
- Performance Rated: Yes
- SDS Required: No (135233618)
- UPC: 096361089938
- Part Description: Auxiliary Engine Cooling Fan
$23.89Product Specifications- Notes: Cut to fit
- Branch Quantity: 0
- Contains Spring: No
- End 1 Inside Diameter: 1.19 in
- End 2 Inside Diameter: 1.19 in
- Material: EPDM
- Modular Hose: No
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 32541
- UPC: 072053135503
- Part Description: Engine Coolant Molded Radiator Hose
$86.32Product Specifications- Notes: Universal Fit Super Duty Electric Puller Primary Fan. Incls mounting hardware. Controls not Incld.
- Material: Plastic
- Performance Rated: Yes
- SDS Required: No (135233618)
- UPC: 096361089921
- Part Description: Auxiliary Engine Cooling Fan
- $21.92 MSRP:
$31.59You Save: $9.67 (31%)Product Specifications- Notes: Mr2; From 07-00
- Other Names: Water Inlet
- Item Dimensions: 2.2 x 0.9 x 1.9 inches
- Item Weight: 1.60 Pounds
- Replaces: 90916-03129, 90916-03084
- Part Description: Water Inlet
$23.76Product Specifications- Notes: 180 Degree; OE Temperature
- By-Pass Flange Diameter: 1.2"
- Depth from Flange: 1.7"
- Design: Bottom By-Pass
- Flange Diameter: 2.2"
- Height from Flange: 0.74"
- Includes Installation Tool: No
- Jiggle Pin/Check Valve: No
- Material: Steel, Copper
- Number of Gaskets: 0
- Number of Seals: 0
- OE Comparison Rating: OE Performance
- OE Part Number: 32498
- Temperature (C): 82
- Temperature (F): 180
- Total Height: 2.44"
- Type: OE Type Thermostat
- UPC: 072053062816
- Part Description: OE Type Engine Coolant Thermostat
$21.32Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1 3/16
- End 2 Inside Diameter: 1 3/16
- Hose Type: Single I.D. Hose
- Material: EPDM
- OE Part Number: 1657203031, 1657274180, 1657203070, 1657422010, 1657274290, 1657322010
- SAE Specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Trunk Height: 17
- UPC: 038244237869
- Part Description: Engine Coolant Curved Radiator Hose
$59.58Product Specifications- Notes: Universal Fit Primary cooling fan. Reversible for push or pull operation. Includes mounting hardware. Controls not included.
- Blade Color A : Black
- Blade Material: Plastic; Reinforced Nylon
- Blade Quantity: 8
- Blade Type: Curved 'S' Blade
- CFM Free Air High: 800
- CFM Free Air Low: 800
- CFM Rad Mnt High: 675
- CFM Rad Mnt Low: 675
- Color: Black
- Depth IN: 2.56"
- Dia. IN: 12.000
- Dia. MM: 304.800
- Fan 1 Diameter: 12.000
- Fan Clutch Mounted: no
- Fan Quantity: 1
- Fan Type: Universal Electric fan
- Material: Reinforced Nylon
- Mounting Hardware: Included
- O.E. Replacement: No
- Performance Rated: Yes
- Rotation: Reversible
- SDS Required: No (135233618)
- Shroud Color: Black
- Shroud Included: Finger Guard on Fan
- Shroud Material: Plastic; reinforced nylon
- Style: Reversible Fan
- Universal Or Specific Fit: Universal Electric fan
- UPC: 096361368965
- Voltage: 12
- Volume (CFM): 800
- Wiring Harness Length: 36.000
- Part Description: Electric Fan Kit
$11.77Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1 1/4
- End 2 Inside Diameter: 1 5/16
- Hose Type: Dual I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Trunk Height: 10
- UPC: 038244135660
- Part Description: Engine Coolant Curved Radiator Hose
$72.57Product Specifications- Notes: Universal Fit Auxiliary Electric Fan. Add on fans used to supplement the primary Eng cooling fan.
- Blade Color A : Black
- Blade Material: Plastic; Reinforced Nylon
- Blade Quantity: 8
- Blade Type: curved 'S' blade
- CFM Free Air High: 650
- CFM Free Air Low: 650
- CFM Rad Mnt High: 500
- CFM Rad Mnt Low: 500
- Color: Black
- Depth IN: 2.57"
- Dia. IN: 10.000
- Dia. MM: 254.000
- Fan 1 Diameter: 10.000
- Fan Clutch Mounted: no
- Fan Quantity: 1
- Fan Type: Universal Electric fan
- Material: Reinforced Nylon
- Mounting Hardware: Included
- O.E. Replacement: No
- Performance Rated: Yes
- Rotation: Reversible
- SDS Required: No (135233618)
- Shroud Color: Black
- Shroud Included: finger guard on fan
- Shroud Material: Plastic; reinforced nylon
- Style: Reversible Fan
- Universal Or Specific Fit: Universal Electric fan
- UPC: 096361368958
- Voltage: 12
- Volume (CFM): 650
- Wiring Harness Length: 36.000
- Part Description: Electric Fan Kit
$61.24 MSRP:$88.98You Save: $27.74 (32%)Product Specifications- Notes: Engine Room; Mr2
- Other Names: Sensor, Water Temperature (For E.F.I.)
- Item Dimensions: 13.8 x 11.1 x 2.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: Temperature Sending Unit
$23.56Product Specifications- Notes: 170 Degree; Alternate Temperature
- By-Pass Flange Diameter: 1.2"
- Depth from Flange: 1.74"
- Design: Bottom By-Pass
- Flange Diameter: 2.2"
- Height from Flange: 0.70"
- Includes Installation Tool: No
- Jiggle Pin/Check Valve: No
- Material: Steel, Copper
- Number of Gaskets: 0
- Number of Seals: 0
- OE Comparison Rating: OE Performance
- OE Part Number: 17, 32497
- Temperature (C): 77
- Temperature (F): 170
- Total Height: 2.44"
- Type: OE Type Thermostat
- UPC: 072053062809
- Part Description: OE Type Engine Coolant Thermostat
$11.69Product Specifications- Notes: Cut to Fit
- Color: Black
- Contains Heat Shield: N
- Contains Protective Sleeve: N
- End 1 Inside Diameter: 1 1/4
- End 2 Inside Diameter: 1 1/4
- Hose Type: Single I.D. Hose
- Material: EPDM
- SAE Specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Trunk Height: 12
- UPC: 036687442406
- Part Description: Engine Coolant Curved Radiator Hose
$25.01Product Specifications- Notes: Cut to fit
- Branch Quantity: 0
- Contains Spring: No
- End 1 Inside Diameter: 1.34 in
- End 2 Inside Diameter: 1.34 in
- Material: EPDM, Plastic
- Modular Hose: No
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 47563
- UPC: 072053194951
- Part Description: Engine Coolant Molded Radiator Hose
$83.42Product Specifications- Notes: Universal Fit Super Duty Electric Puller Auxiliary Fan. Add on fans used to supplement the primary Eng cooling fan. Incls mounting hardware. Controls not Incld.
- Blade Material: Plastic
- Color: Black
- Dia. IN: 9.000
- Material: Plastic
- Mounting Hardware: Included
- O.E. Replacement: No
- Performance Rated: Yes
- SDS Required: No (135233618)
- Shroud Included: Finger Guard on Fan
- UPC: 096361089907
- Part Description: Auxiliary Engine Cooling Fan
$53.79Product Specifications- Notes: Radiator Fan Motor
- Bolt Quantity: 3
- Color: Black
- Connector Quantity: Connector not Included
- Motor Diameter: 2.75
- Motor Type: 2 Pole
- Mount Type: OE Mount
- Number of Speeds: OE Equivlent
- O.E. Replacement: Yes
- Performance Rated: Yes
- Power Requirement: 12 volt
- Shroud: No
- Style: Radiator Fan, Condenser Fan
- Terminal Gender: Wire Leads
- Terminal Quantity: 0
- UPC: 096361352544
- Vented: Radiator Fan, Condenser Fan
- Wire Quantity: 2 lead wires
- Part Description: A C Condenser Fan Motor
- $61.24 MSRP:
$88.98You Save: $27.74 (32%)Product Specifications- Notes: Engine Room; Mr2
- Other Names: Sensor, Water Temperature (For E.F.I.)
- Item Dimensions: 13.8 x 11.1 x 2.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: Temperature Sending Unit
1-30 of 98 Results
< Previous
1234
Next >