121 products about 2005 Toyota Land Cruiser A/C & Heating found
Filter Results 
Sort
View by
 Product Specifications- Clutch Maximum Diameter: 115.0 mm
 - Compressor Mount Hole Quantity: 3
 - Mounting Type: Bolt Tangent
 - OE Part Number: 8832060680, 8832050060, 8832050061, 8832050080, 8831060851, 8831050120, 8832060681, 8831060850, 8831050081, 8831050121
 - Pulley Belt Type: Serpentine
 - Refrigerant Type: R134A
 - UPC: 042511165953
 - Part Description: A/C Compressor with Clutch
 
More Info   Product Specifications- Notes: W/Aux. Heater; Cut to Length, 4"
 - Centerline Length: 50 ft
 - End 1 Inside Diameter: .625 in
 - End 2 Inside Diameter: .625 in
 - Material: EPDM
 - OE Part Number: 8990
 - UPC: 072053066319
 - Weight Per Length: 11.70 lbs./Carton
 - Working Pressure: 60 PSI
 - Part Description: Safety Stripe Hvac Heater Hose
 
More Info   Product Specifications- Notes: w/ 10PA20C Compressor; Reman w/ Clutch; May Require use of OE Manifold
 - Clutch Included: Yes
 - Clutch Maximum Diameter: 4.500
 - Coil Clock Position: Wire Lead
 - Coil Voltage: 12
 - Compatible Refrigerant Oil Type: PAG 46
 - Compressor Type: 10PA20C
 - Discharge Port Type: Pad Mount
 - Distance From Clutch To Mounting Flange: 1.59375
 - Mount Distance MM: 40.640
 - Mounting Hardware: Not Included
 - Mounting Type: Tangent Mount
 - New or Reman: Remanufactured
 - O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
 - O-Ring A Quantity: 1
 - O-Ring B Number/Desc: Not Required
 - O-Ring B Quantity: NR
 - Printed Foot Note: May Require use of OE Manifold
 - Pulley Belt Type: Serpentine
 - Pulley Diameter MM: 114.300
 - Pulley Groove Quantity: 6
 - Pulley Lip Diameter: 4.500
 - Pulley Outside Diameter: 4.500
 - Pulley Ridge Diameter: 4.500
 - Refrigerant Type: R134a
 - Suction Port Type: Pad Mount
 - Switch Included: Speed Sensor
 - Terminal Type: Pin
 - UPC: 096361773974
 - Part Description: Remanufactured A C Compressor With Clutch
 
More Info   Product Specifications- Notes: W/Aux. Heater; Cut to Length, 8";Cut to Length, 6"
 - Centerline Length (in): 600"
 - Inside Diameter 1 (in): 0.5"
 - OE Part Number: 8989
 - UPC: 072053066302
 - Weight Per Length: 8.25 lbs./Carton
 - Working Pressure (psi): 60
 - Part Description: Engine Coolant Molded Bypass Hose
 
More Info   Product Specifications- Notes: Rear AC; DENSO is OE supplier for this application
 - Depth: 90.0 mm
 - Height: 200.0 mm
 - New or Remanufactured: New
 - UPC: 042511192102
 - Width: 159.0 mm
 - Part Description: A/C Evaporator Core
 
More Info  $92.08 MSRP: $133.78
You Save: $41.70 (32%)
Product Specifications- Notes:  Land Cruiser
 - Other Names:  Dehydrator; Drier
 - Item Dimensions:  13.0 x 5.2 x 2.6 inches
 - Item Weight:  0.90 Pounds
 - Fitment Type:  Direct Replacement
 - Replaces:  88474-08030
 - Part Description:  Drier Desiccant Bag
 
More Info  Product Specifications- Notes: w/ 10PA20C Compressor; New w/ Clutch
 - Clutch Included: Yes
 - Clutch Maximum Diameter: 4.500
 - Coil Clock Position: Wire Lead
 - Coil Voltage: 12
 - Compatible Refrigerant Oil Type: PAG 46
 - Compressor Type: 10PA20C
 - Discharge Port Type: Pad Mount
 - Distance From Clutch To Mounting Flange: 1.59375
 - Mount Distance MM: 40.640
 - Mounting Hardware: Not Included
 - Mounting Type: Tangent Mount
 - New or Reman: New
 - O-Ring A Number/Desc: [24156] / Compressor Manifold Port Gasket
 - O-Ring A Quantity: 1
 - O-Ring B Number/Desc: Not Required
 - O-Ring B Quantity: NR
 - O-Ring C Number/Desc: Not Required
 - O-Ring C Quantity: NR
 - Printed Foot Note: May Require use of OE Manifold
 - Pulley Belt Type: Serpentine
 - Pulley Diameter MM: 114.300
 - Pulley Groove Quantity: 6
 - Pulley Lip Diameter: 4.500
 - Pulley Outside Diameter: 4.500
 - Pulley Ridge Diameter: 4.500
 - Refrigerant Type: R134a
 - Suction Port Type: Pad Mount
 - Terminal Type: Pin
 - UPC: 096361783973
 - Part Description: A C Compressor With Clutch
 
More Info   Product Specifications- Centerline Length (in): 13.9"
 - Inside Diameter 1 (in): 0.5"
 - Number of Branches: 0
 - UPC: 072053488173
 - Part Description: Hvac Heater Molded Hose
 
More Info   Product Specifications- Notes: Desiccant Bag Replacement Kit; May Req Use Of Original Drier Plug
 - UPC: 671607198355
 - Part Description: A/C Accumulator
 
More Info   Product Specifications- Notes: Front AC; DENSO is OE supplier for this application
 - Depth: 90.0 mm
 - Height: 266.2 mm
 - New or Remanufactured: New
 - UPC: 042511192041
 - Width: 295.0 mm
 - Part Description: A/C Evaporator Core
 
More Info   Product Specifications- Notes: Front AC; DENSO is the OE supplier for this vehicle; OE-specified O-rings Incld.
 - OE Part Number: 8851548040, 8851547020, 8851560120, MR500662, 8851528160
 - Type: Block valve
 - UPC: 042511072671
 - Part Description: A/C Expansion Valve
 
More Info  $92.08 MSRP: $133.78
You Save: $41.70 (32%)
Product Specifications- Notes:  Land Cruiser
 - Other Names:  Dehydrator; Drier
 - Item Dimensions:  13.0 x 5.2 x 2.6 inches
 - Item Weight:  0.90 Pounds
 - Fitment Type:  Direct Replacement
 - Replaces:  88474-08030
 - Part Description:  Drier Desiccant Bag
 
More Info  Product Specifications- Connector Gender: Female / Female
 - Connector Shape: Rectangle
 - Meets / Exceeds OEM: Yes
 - Number of Terminals: 3 / 2
 - Speed: Variable
 - Terminal Type: Spade
 - UPC: 096361203310
 - Part Description: Hvac Blower Motor Resistor
 
More Info   Product Specifications- Notes: W/Aux. Heater; Cut to fit
 - Centerline Length (in): 12.3"
 - Inside Diameter 1 (in): 0.52"
 - Number of Branches: 0
 - OE Part Number: 2234
 - UPC: 072053191240
 - Part Description: Hvac Heater Molded Hose
 
More Info   Product Specifications- Notes: DENSO is the OE supplier for this vehicle; OE-specified O-rings Incld.
 - Material: Cloth
 - OE Part Number: 8847408010, 8847417010, 8847450020, 7812A125, 8847447010, 8847447020, 8847408030, 8847422010
 - UPC: 042511093515
 - Part Description: A/C Receiver Drier
 
More Info   Product Specifications- Notes: W/Aux. Heater; Cut to fit
 - Angle: 90
 - Arm Length: 152 mm
 - Centerline Length: 254 mm
 - End 1 Inside Diameter: 16 mm
 - End 2 Inside Diameter: 16 mm
 - Material: EPDM
 - OE Part Number: 8915
 - UPC: 072053062007
 - Part Description: 90 Degree Hvac Heater Molded Hose
 
More Info   Product Specifications- Notes: Evaporator replacement for this application may require considerable time, specialty tools, and training.
 - Core Depth Fraction: 3-9/16
 - Core Depth MM: 90.487
 - Core Height Fraction: 11
 - Core Height MM: 279.400
 - Core Width Fraction: 11-1/2
 - Core Width MM: 292.100
 - Depth: 3.563
 - Height: 11.000
 - Inlet Fitting Outside Diameter: No. 8
 - Material: Aluminum
 - O-Ring A Number/Desc: [24661] / Green O-Ring
 - O-Ring A Quantity: 1
 - O-Ring B Number/Desc: [24681] / Green O-Ring
 - O-Ring B Quantity: 1
 - Outlet Fitting Outside Diameter: No. 10
 - UPC: 096361549418
 - Width: 11.500
 - Part Description: A C Evaporator Core
 
More Info  $92.08 MSRP: $133.78
You Save: $41.70 (32%)
Product Specifications- Notes:  Land Cruiser
 - Other Names:  Dehydrator; Drier
 - Item Dimensions:  13.0 x 5.2 x 2.6 inches
 - Item Weight:  0.90 Pounds
 - Fitment Type:  Direct Replacement
 - Replaces:  88474-08030
 - Part Description:  Drier Desiccant Bag
 
More Info  Product Specifications- Connector Gender: Female
 - Connector Shape: Rectangle
 - Meets / Exceeds OEM: Yes
 - Number of Terminals: 4
 - Speed: Variable
 - Terminal Type: Spade
 - UPC: 096361202283
 - Part Description: Hvac Blower Motor Resistor
 
More Info   Product Specifications- Notes: W/O Aux. Heater; Cut to fit
 - Angle: 90
 - Arm Length 1 (in): 4"
 - Arm Length 2 (in): 12"
 - Centerline Length (in): 16"
 - Inside Diameter 1 (in): 0.625"
 - UPC: 072053062014
 - Part Description: 90 Degree Hvac Heater Molded Hose
 
More Info   Product Specifications- Core Depth Fraction: 3-9/16
 - Core Depth MM: 90.487
 - Core Height Fraction: 6-1/16
 - Core Height MM: 153.988
 - Core Width Fraction: 9-1/4
 - Core Width MM: 234.950
 - Depth: 3.563
 - Height: 6.0625
 - Inlet Fitting Type: Block Fitting
 - Material: Aluminum
 - O-Ring A Number/Desc: [24610] / Green O-Ring
 - O-Ring A Quantity: 2
 - Outlet Fitting Type: Block Fitting
 - UPC: 096361549616
 - Width: 9.250
 - Part Description: A C Evaporator Core
 
More Info   Product Specifications- Notes: Cut to fit
 - Angle: 90
 - Arm Length 1 (in): 4"
 - Arm Length 2 (in): 6"
 - Centerline Length (in): 10"
 - Inside Diameter 1 (in): 0.5"
 - OE Part Number: 34586
 - UPC: 072053061949
 - Part Description: 90 Degree Hvac Heater Molded Hose
 
More Info   Product Specifications- Notes: w/ Wheel
 - Cage Wheel Included: w/ Wheel
 - Connector Gender: Female
 - Connector qty: 1
 - Flanged End: Yes
 - Material: Metal
 - Motor Diameter: 3.250
 - Motor Length: 4.000
 - Mount Type: OE Mount
 - New or Reman: New
 - Number of Terminals: 2
 - O.E. Replacement: Yes
 - Rotation: CCW
 - Shaft Diameter: 0.3125
 - Shaft Length: 1.500
 - Style: Flanged
 - Terminal Type: 2 Lead Wires w/ Connector
 - UPC: 096361758803
 - Vented: Vented
 - Voltage: 12
 - Wheel Dia. IN: 5.625
 - Wheel Height IN: 2.750
 - Part Description: Hvac Blower Motor With Wheel
 
More Info  $181.92 MSRP: $264.29
You Save: $82.37 (32%)
Product Specifications- Notes:  Front
 - Other Names:  Fan & Motor; Motor Sub-Assembly, Heater Blower, W/Fan; Motor Sub-Assembly, Blower W/Fan
 - Item Dimensions:  14.6 x 10.6 x 9.7 inches
 - Item Weight:  4.60 Pounds
 - Fitment Type:  Direct Replacement
 - Replaces:  87103-50050
 - Part Description:  Fan & Motor
 
More Info  Product Specifications- Notes: Cut to fit
 - Branch Quantity: 0
 - Centerline Length (in): 6.5
 - Centerline Length (mm): 165
 - End 1 Inside Diameter: 0.28 in
 - End 2 Inside Diameter: 0.28 in
 - Material: EPDM
 - Molded: Yes
 - Number of Quick Connect Fittings: 0
 - OE Part Number: 1945
 - UPC: 072053178241
 - Part Description: Hvac Heater Molded Hose
 
More Info   Product Specifications- Color: Blue; Gray
 - Comp Open/Closed: Open
 - Connector Gender: Male
 - Connector Shape: Oval; Round
 - Fan Open/Closed: Open
 - Fitting Gender: Male
 - Fitting Thread Size: M11 x 1.00
 - Item Included A Desc: 23678
 - Item Included A Qty.: 1
 - Material: Steel
 - Meets / Exceeds OEM: YES
 - Mnt Sys Loc: Radiator Mount; System Mounted
 - Number of Terminals: 4
 - Operate Psi High Off: 455
 - Operate Psi High On: 350
 - Operate Psi Low Off: 28
 - Operate Psi Low On: 29; 30
 - Operate Psi Med Off: 180
 - Operate Psi Med On: 220
 - Style: Pressure
 - Terminal Type: Pin
 - UPC: 096361209442
 - Voltage: 12
 - Weather Pack: Yes
 - Part Description: A C Trinary Switch
 
More Info   Product Specifications- Notes: w/o Wheel
 - Cage Wheel Included: w/o Wheel
 - Connector Gender: Female
 - Connector qty: 1
 - Flanged End: Yes
 - Material: Metal
 - Motor Dia. MM: 82.550
 - Motor Diameter: 3.250
 - Motor Length: 4.000
 - Motor Length MM: 101.600
 - Mount Type: OE Mount
 - New or Reman: New
 - Number of Terminals: 2
 - O.E. Replacement: Yes
 - Rotation: CCW
 - Shaft Diameter: 0.3125
 - Shaft Length: 1.500
 - Shaft Shape: Round
 - Shaft Type: Round
 - Style: Flanged
 - Terminal Type: 2 Lead Wires w/ Connector
 - UPC: 096361353640
 - Vented: Vented
 - Voltage: 12
 - Wheel Dia. IN: Yes
 - Part Description: Hvac Blower Motor Without Wheel
 
More Info   Product Specifications- Notes: Discharge Line
 - Bracket: w/o Bracket
 - Component Type: Discharge Line
 - Fittings Included: Included
 - Gasket or Seal Included: Included
 - Muffler: w/o Muffler
 - O-Ring A Number/Desc: [24661] / Green O-Ring
 - O-Ring A Quantity: 2
 - O.E. Replacement: Yes
 - Refrigerant Type: R134a
 - Service Port: w/ Service Port
 - Service Port Qty: 1
 - Service Port Type: R134-A Quick Disconnect
 - Suction End Type: P-Nut Fitting
 - Svc Port High Side: High Side
 - Switch Included: Not Included
 - Switch Service Port: w/o Switch Port
 - UPC: 096361554238
 - Part Description: A C Discharge Line Hose Assembly
 
More Info   Product Specifications- Connector Pin Qty: 4
 - Connector Shape: Other design
 - Gender: Female
 - Style: Harness Connector
 - Terminal Gender: Female
 - Terminal Quantity: 4
 - UPC: 096361098336
 - Wire Length IN: 6.000
 - Part Description: A C Clutch Control Relay Harness Connector
 
More Info  $140.58 MSRP: $204.25
You Save: $63.67 (32%)
Product Specifications- Notes:  W/Rear AC
 - Other Names:  Clutch; Clutch Assembly, Magnet
 - Item Dimensions:  8.3 x 6.8 x 4.5 inches
 - Item Weight:  5.70 Pounds
 - Fitment Type:  Direct Replacement
 - Replaces:  88410-50100
 - Part Description:  Clutch & Pulley
 
More Info