< Back ×
2007 Dodge Dakota Driveline, Axles & 4WD
My Vehicle Change Vehicle
2007 Dodge Dakota
$291.80Product Specifications- Notes: 9.25" Ring Gear; w/3.90 Axle Ratio
- Gear Ratio: 3.90
- Item Grade: Standard Replacement
- UPC: 019495515708
- Part Description: 2007 Dodge Dakota OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$27.25Product Specifications- Notes: BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: SQUARE FRAME;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- OE Part Number: 5014097AA
- Shape: Square
- UPC: 081106060792
- Part Description: 2007 Dodge Dakota Driveshaft Center Support Bearing
Vehicle Fitment- 2007 Dodge Dakota | All Trims | 6 Cyl 3.7L
- 2007 Dodge Dakota | All Trims | 8 Cyl 4.7L
$604.60Product Specifications- Notes: without Electronic Shift;with 69-1/4" (1759 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: No
- Length (in): 69.25
- Length (mm): 1759
- Measurement Method: Measurement Taken from End of Input Shaft to End of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 3.95
- Tubing Outer Diameter (mm): 100
- Part Description: 2007 Dodge Dakota Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$181.76Product Specifications- Notes: Master Kit; 9.25" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487016
- Width: 2.50"
- Part Description: 2007 Dodge Dakota Rear Master Differential Rebuild Kit
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$278.85Product Specifications- Notes: 9.25" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- UPC: 019495105473
- Part Description: 2007 Dodge Dakota OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$23.66 MSRP:$35.25You Save: $11.59 (33%)Product Specifications- Notes: Dakota
- Location: Driver Side; Passenger Side
- Item Dimensions: 0.9 x 2.8 x 3.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Dodge Dakota Seal-Axle Drive Shaft
Vehicle Fitment- 2007 Dodge Dakota | Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, Sport, Sport Plus, ST, SXT, TRX, TRX4 | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
$555.27Product Specifications- Notes: with 24-1/4" (616 mm) Long Driveshaft;Before 01/24/2007;Measurement taken from end of CV Joint Flange Face to end of Flange Face; Supplied as new
- Greasable: Yes
- Length: 24.25"
- Length (mm): 616
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2007 Dodge Dakota Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Dodge Dakota | All Trims | 6 Cyl 3.7L
Dorman® Oe Solution Differential Disc Kit Rear Differential for 2007 Dodge Dakota
PartNumber: 697-782$178.85Product Specifications- Notes: w/Limited Slip Differential; w/Chrysler 9.25 Rear Axle
- Inside Diameter: 2.04"; 2.13"
- OE Part Number: 5252506
- Outside Diameter: 3.35"
- Package Contents: 1 Differential Clutch Kit
- Shim Material: Steel
- UPC: 037495175555
- Part Description: 2007 Dodge Dakota Oe Solution Differential Disc Kit Rear Differential
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$127.31Product Specifications- Notes: Master Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499392
- Width: 2.50"
- Part Description: 2007 Dodge Dakota Rear Master Differential Rebuild Kit
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$9.11Product Specifications- Notes: 12 Bolt;with 9.250in Ring Gear;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 12
- Thickness (in): 0.030"
- UPC: 023913682705
- Part Description: 2007 Dodge Dakota Axle Housing Cover Gasket
Vehicle Fitment- 2007 Dodge Dakota | All Trims | 8 Cyl 4.7L
- 2007 Dodge Dakota | All Trims | 6 Cyl 3.7L
$138.29Product Specifications- Notes: with Chrysler Axle; with 9.25in Ring Gear
- UPC: 614046887015
- Part Description: 2007 Dodge Dakota Rear Differential Master Bearing Kit
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$9.65 MSRP:$14.10You Save: $4.45 (32%)Product Specifications- Notes: Dakota; Use Rtv Sealant.
- Item Dimensions: 9.1 x 7.1 x 5.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5010884AC, 5010884AA, 4318025, J8993317, MD997740
- Part Description: 2007 Dodge Dakota *SEALER-None
Vehicle Fitment- 2007 Dodge Dakota | Base, Big Horn, Laramie, LE, Lone Star, R/T, S, SLT, SLT Plus, Sport, Sport Plus, ST, SXT, TRX4, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
Dorman® OE Solution Rear Ring And Pinion Bearing Installation Kit for 2007 Dodge Dakota
PartNumber: 697-120$187.17Product Specifications- Notes: Std Design; 9.25" Ring Gear
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495825197
- Part Description: 2007 Dodge Dakota OE Solution Rear Ring And Pinion Bearing Installation Kit
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$103.69Product Specifications- Notes: Std Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499255
- Width: 2.50"
- Part Description: 2007 Dodge Dakota Rear Differential Rebuild Kit
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$108.74Product Specifications- Notes: with Chrysler Axle; with 8.25in Ring Gear
- Part Description: 2007 Dodge Dakota Rear Differential Master Bearing Kit
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$84.12Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Length: 19.27"
- Material: Carbon Steel
- OE Part Number: 52069886AE
- Spline Quantity: 29 Spline
- UPC: 019495392941
- Wheel Lug Quantity: 0
- Part Description: 2007 Dodge Dakota OE Solutions Front Passenger Side Inner Axle Shaft
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$66.81Product Specifications- Notes: Bearing & Support
- Bolt Hole Center: 6.629"
- Inside Diameter: 1.378"
- Outside Diameter: 4.980"
- UPC: 085311493598
- Width: 1.941"
- Part Description: 2007 Dodge Dakota Driveshaft Center Support Bearing
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
- $9.65 MSRP:
$14.10You Save: $4.45 (32%)Product Specifications- Notes: Dakota; Use Rtv Sealant.
- Item Dimensions: 9.1 x 7.1 x 5.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5010884AC, 5010884AA, 4318025, J8993317, MD997740
- Part Description: 2007 Dodge Dakota *SEALER-None
Vehicle Fitment- 2007 Dodge Dakota | Base, Big Horn, Laramie, LE, Lone Star, R/T, S, SLT, SLT Plus, Sport, Sport Plus, ST, SXT, TRX4, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
$15.40Product Specifications- Notes: Grease Fitting in Cross; Perf Grade;Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 2007 Dodge Dakota Grade Performance™ Rear U-Joint
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$48.72Product Specifications- Type: A-1
- Part Description: 2007 Dodge Dakota Differential Bearing
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$56.06Product Specifications- Notes: w/9.25" Chrysler Rear Axle
- Color/Finish: Black
- Differential Cover Bolt Count: 12
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: Yes
- Differential Cover/Case Material: Steel
- Gasket or Seal Included: No
- OE Part Number: 4384293AC, 53007762
- UPC: 037495174978
- Part Description: 2007 Dodge Dakota OE Solutions Rear Differential Cover
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$29.26Product Specifications- Notes: Repair
- Inside Diameter: 1.618"
- OE Part Number: 9759R1559, ZZL126175
- Outside Diameter: 2.577"
- UPC: 085311066273
- Width: 1.303"
- Part Description: 2007 Dodge Dakota Rear Axle Shaft Bearing Assembly
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$6.68Product Specifications- Notes: FAG Global# FC67148.5; .830" Wide Brg.
- UPC: 670774196836
- Part Description: 2007 Dodge Dakota Rear Axle Shaft Bearing
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$11.88 MSRP:$17.65You Save: $5.77 (33%)Product Specifications- Notes: Dakota
- Item Dimensions: 0.9 x 1.9 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Dodge Dakota SPACER-Drive PINION Bearing
Vehicle Fitment- 2007 Dodge Dakota | Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, Sport, Sport Plus, ST, SXT, TRX, TRX4 | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2007 Dodge Dakota Grade Performance™ Rear U-Joint
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$50.41Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Length: 6.26"
- Material: Carbon Steel
- OE Part Number: 52069887AE
- Spline Quantity: 29 Spline
- UPC: 019495392958
- Wheel Lug Quantity: 0
- Part Description: 2007 Dodge Dakota OE Solutions Front Driver Side Inner Axle Shaft
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$24.65Product Specifications- Notes: 9.25" Ring Gear
- Cone ID: 1.875"
- Cone Length: 1"
- Cone Radius: 0.14"
- UPC: 085311057615
- Width: 1"
- Part Description: 2007 Dodge Dakota Rear Outer Axle Shaft Bearing
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$10.55Product Specifications- Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft;Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft;Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Type: Plain
- Greasable: Yes
- Length Axis 1: 3.62
- Length Axis 2: 3.62
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Style: 4 Round Plain Bearings
- Universal Joint Style: Spicer 1330
- UPC: 083286002135
- Width: 3.622" Overall Axis
- Part Description: 2007 Dodge Dakota Grade Standard U-Joint
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$21.86Product Specifications- Notes: w/New Process 233D Transfer Case; 2Spd; w/Part Time 4WD;w/New Process 243D Transfer Case; 2Spd; w/Part Time 4WD;w/New Process 244HD Transfer Case; 2Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2007 Dodge Dakota Driveshaft Center Support Bearing
Vehicle Fitment- 2007 Dodge Dakota | All Trims | All Engines
$29.56 MSRP:$44.30You Save: $14.74 (34%)Product Specifications- Notes: 8.25 Axle; 9.25 Axle; Dakota
- Item Dimensions: 0.8 x 3.3 x 3.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52070427AA
- Part Description: 2007 Dodge Dakota Seal-Axle Drive Shaft
Vehicle Fitment- 2007 Dodge Dakota | Base, Big Horn, Laramie, LE, Lone Star, R/T, S, SE, Shelby, SLT, SLT Plus, Sport, Sport Plus, ST, SXT, TRX, TRX4, WS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
1-30 of 213 Results
< Previous
12345
Next >