< Back ×
2007 Dodge Durango Driveline, Axles & 4WD
My Vehicle Change Vehicle
2007 Dodge Durango
$259.86Product Specifications- Notes: 9.25" Ring Gear; w/3.90 Axle Ratio
- Gear Ratio: 3.90
- Item Grade: Standard Replacement
- UPC: 019495515708
- Part Description: 2007 Dodge Durango OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$532.62Product Specifications- Notes: with 56-1/4" (1428 mm) Long Driveshaft;with 244 Transfer Case;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Greasable: No
- Length: 56.25"
- Length (mm): 1428
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Tubing Outer Diameter (in): 3.00"
- Part Description: 2007 Dodge Durango Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$181.76Product Specifications- Notes: Master Kit; 9.25" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487016
- Width: 2.50"
- Part Description: 2007 Dodge Durango Rear Master Differential Rebuild Kit
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$267.67Product Specifications- Notes: 9.25" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- UPC: 019495105473
- Part Description: 2007 Dodge Durango OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$392.88Product Specifications- Notes: with 28-3/4" (730 mm) Long Driveshaft;with 144 Transfer Case;Measurement taken from end of input shaft to end of flange face
- Greasable: No
- Length: 28.75"
- Length (mm): 730
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2007 Dodge Durango Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$6.11 MSRP:$9.15You Save: $3.04 (34%)Product Specifications- Notes: 4WD
- Other Names: Breather, Vent, Vent Hose Vent
- Item Dimensions: 1.8 x 0.8 x 0.8 inches
- Item Weight: 0.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Dodge Durango Vent-Axle
Vehicle Fitment- 2007 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Dorman® Oe Solution Differential Disc Kit Rear Differential for 2007 Dodge Durango
PartNumber: 697-782$158.70Product Specifications- Notes: w/Limited Slip Differential; w/Chrysler 9.25 Rear Axle
- Inside Diameter: 2.04"; 2.13"
- OE Part Number: 5252506
- Outside Diameter: 3.35"
- Package Contents: 1 Differential Clutch Kit
- Shim Material: Steel
- UPC: 037495175555
- Part Description: 2007 Dodge Durango Oe Solution Differential Disc Kit Rear Differential
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$9.11Product Specifications- Notes: 12 Bolt;with 9.250in Ring Gear;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 12
- Thickness (in): 0.030"
- UPC: 023913682705
- Part Description: 2007 Dodge Durango Axle Housing Cover Gasket
Vehicle Fitment- 2007 Dodge Durango | All Trims | 8 Cyl 4.7L
- 2007 Dodge Durango | All Trims | 6 Cyl 3.7L
- 2007 Dodge Durango | All Trims | 8 Cyl 5.7L
$138.29Product Specifications- Notes: with Chrysler Axle; with 9.25in Ring Gear
- UPC: 614046887015
- Part Description: 2007 Dodge Durango Rear Differential Master Bearing Kit
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$127.31Product Specifications- Notes: Master Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499392
- Width: 2.50"
- Part Description: 2007 Dodge Durango Rear Master Differential Rebuild Kit
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$330.41Product Specifications- Notes: with 62-11/16" (1592 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Greasable: No
- Length: 62.687"
- Length (mm): 1592
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Tubing Outer Diameter (in): 3.00"
- Part Description: 2007 Dodge Durango Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$6.94 MSRP:$10.10You Save: $3.16 (32%)Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Item Dimensions: 0.4 x 1.5 x 1.5 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Dodge Durango Snap Ring-Axle Shaft
Vehicle Fitment- 2007 Dodge Durango | Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, Sport, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Dorman® OE Solution Rear Ring And Pinion Bearing Installation Kit for 2007 Dodge Durango
PartNumber: 697-120$166.71Product Specifications- Notes: Std Design; 9.25" Ring Gear
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495825197
- Part Description: 2007 Dodge Durango OE Solution Rear Ring And Pinion Bearing Installation Kit
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$108.74Product Specifications- Notes: with Chrysler Axle; with 8.25in Ring Gear
- Part Description: 2007 Dodge Durango Rear Differential Master Bearing Kit
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$103.69Product Specifications- Notes: Std Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499255
- Width: 2.50"
- Part Description: 2007 Dodge Durango Rear Differential Rebuild Kit
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2007 Dodge Durango Grade Performance™ Rear U-Joint
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
Dorman® OE Solutions Front Passenger Side Inner Axle Shaft for 2007 Dodge Durango
PartNumber: 630-415$75.38Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Length: 19.27"
- Material: Carbon Steel
- OE Part Number: 52069886AE
- Spline Quantity: 29 Spline
- UPC: 019495392941
- Wheel Lug Quantity: 0
- Part Description: 2007 Dodge Durango OE Solutions Front Passenger Side Inner Axle Shaft
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$30.17 MSRP:$45.15You Save: $14.98 (34%)Product Specifications- Notes: 2WD; 4WD; Durango
- Location: Driver Side; Passenger Side
- Other Names: Axle Seal, Differential Cover Seal, Seal
- Item Dimensions: 0.8 x 3.2 x 3.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Dodge Durango Seal-Axle Drive Shaft
Vehicle Fitment- 2007 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
$24.65Product Specifications- Notes: 9.25" Ring Gear
- Cone ID: 1.875"
- Cone Length: 1"
- Cone Radius: 0.14"
- UPC: 085311057615
- Width: 1"
- Part Description: 2007 Dodge Durango Rear Outer Axle Shaft Bearing
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$314.27Product Specifications- Notes: with 59-1/4" (1505 mm) Long Driveshaft;with 144 Transfer Case;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Greasable: No
- Length: 59.25"
- Length (mm): 1505
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Tubing Outer Diameter (in): 3.00"
- Part Description: 2007 Dodge Durango Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$48.72Product Specifications- Type: A-1
- Part Description: 2007 Dodge Durango Differential Bearing
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$29.93Product Specifications- Notes: w/New Process 144 Transfer Case; 1Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2007 Dodge Durango Driveshaft Center Support Bearing
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; Inside Lock Rings
- Bearing Cap Diameter: 1.125"
- Lock Ring Type: Internal
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286531055
- Part Description: 2007 Dodge Durango Grade Performance™ Rear U-Joint
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$23.66 MSRP:$35.25You Save: $11.59 (33%)Product Specifications- Notes: 4WD; Durango
- Location: Driver Side; Passenger Side
- Item Dimensions: 0.9 x 2.8 x 3.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Dodge Durango Seal-Axle Drive Shaft
Vehicle Fitment- 2007 Dodge Durango | Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, Sport, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
$45.18Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Length: 6.26"
- Material: Carbon Steel
- OE Part Number: 52069887AE
- Spline Quantity: 29 Spline
- UPC: 019495392958
- Wheel Lug Quantity: 0
- Part Description: 2007 Dodge Durango OE Solutions Front Driver Side Inner Axle Shaft
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$18.59Product Specifications- Notes: w/9.25" Ring Gear;9.25" Ring Gear
- Cone ID: 1.968"
- Cone Length: 0.866"
- Cone Radius: 0.14"
- OE Part Number: 68003555AA, 68050211AB, 05072506AA, 9759JLM704649, 3723149, 5072506AA
- UPC: 085311057332
- Width: 0.861"
- Part Description: 2007 Dodge Durango Rear Axle Shaft Bearing
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$16.65Product Specifications- Notes: Brute Force Greaseable
- Inside Lock-Up 1: 2.557"
- Outer Diameter: 1.125"
- UPC: 085311099189
- Part Description: 2007 Dodge Durango Center Greaseable U Joint
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$21.86Product Specifications- Notes: w/New Process 244HD Transfer Case; 2Spd; Full Time 4WD;w/New Process 144 Transfer Case; 1Spd; w/Part Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2007 Dodge Durango Driveshaft Center Support Bearing
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$9.48Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 2007 Dodge Durango Spicer 1310 Series Grade Standard U-Joint
Vehicle Fitment- 2007 Dodge Durango | All Trims | All Engines
$9.65 MSRP:$14.10You Save: $4.45 (32%)Product Specifications- Notes: 4WD; Durango
- Item Dimensions: 9.1 x 7.1 x 5.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5010884AC, 5010884AA, 4318025, J8993317, MD997740
- Part Description: 2007 Dodge Durango *SEALER-None
Vehicle Fitment- 2007 Dodge Durango | Adventurer, Base, Limited, R/T, SLT, SLT Plus, Sport, ST, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
1-30 of 165 Results
< Previous
12345
Next >