< Back ×
2008 Chrysler Aspen Driveline, Axles & 4WD
My Vehicle Change Vehicle
2008 Chrysler Aspen
$259.86Product Specifications- Notes: 9.25" Ring Gear; w/3.90 Axle Ratio
- Gear Ratio: 3.90
- Item Grade: Standard Replacement
- UPC: 019495515708
- Part Description: 2008 Chrysler Aspen OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$532.62Product Specifications- Notes: with 56-1/4" (1428 mm) Long Driveshaft;with 244 Transfer Case;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Greasable: No
- Length: 56.25"
- Length (mm): 1428
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Tubing Outer Diameter (in): 3.00"
- Part Description: 2008 Chrysler Aspen Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$181.76Product Specifications- Notes: Master Kit; 9.25" Ring Gear;Master Kit; 9.25'' Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487016
- Width: 2.50"
- Part Description: 2008 Chrysler Aspen Rear Master Differential Rebuild Kit
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | 8 Cyl 4.7L
- 2008 Chrysler Aspen | All Trims | 8 Cyl 5.7L
$267.67Product Specifications- Notes: 9.25" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- UPC: 019495105473
- Part Description: 2008 Chrysler Aspen OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$392.88Product Specifications- Notes: with 144 Transfer Case;with 28-3/4" (730 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face
- Greasable: No
- Length: 28.75"
- Length (mm): 730
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2008 Chrysler Aspen Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$6.11 MSRP:$9.15You Save: $3.04 (34%)Product Specifications- Notes: 4WD
- Other Names: Breather, Vent, Vent Hose Vent
- Item Dimensions: 1.8 x 0.8 x 0.8 inches
- Item Weight: 0.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chrysler Aspen Vent-Axle
Vehicle Fitment- 2008 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
$9.11Product Specifications- Notes: with 12 Bolt Holes;with 9.25in Ring Gear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 12
- Thickness (in): 0.030"
- UPC: 023913682705
- Part Description: 2008 Chrysler Aspen Axle Housing Cover Gasket
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | 8 Cyl 5.7L
$127.31Product Specifications- Notes: Master Kit; 8.25'' Ring Gear:;Master Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499392
- Width: 2.50"
- Part Description: 2008 Chrysler Aspen Rear Master Differential Rebuild Kit
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | 8 Cyl 4.7L
- 2008 Chrysler Aspen | All Trims | 8 Cyl 5.7L
$138.29Product Specifications- Notes: with Chrysler Axle; with 9.25in Ring Gear
- UPC: 614046887015
- Part Description: 2008 Chrysler Aspen Rear Differential Master Bearing Kit
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
Dorman® OE Solutions Front Passenger Side Inner Axle Shaft for 2008 Chrysler Aspen
PartNumber: 630-415$75.38Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Length: 19.27"
- Material: Carbon Steel
- OE Part Number: 52069886AE
- Spline Quantity: 29 Spline
- UPC: 019495392941
- Wheel Lug Quantity: 0
- Part Description: 2008 Chrysler Aspen OE Solutions Front Passenger Side Inner Axle Shaft
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$330.41Product Specifications- Notes: with 62-11/16" (1592 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Greasable: No
- Length: 62.687"
- Length (mm): 1592
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Tubing Outer Diameter (in): 3.00"
- Part Description: 2008 Chrysler Aspen Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$6.94 MSRP:$10.10You Save: $3.16 (32%)Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Item Dimensions: 0.4 x 1.5 x 1.5 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chrysler Aspen Snap Ring-Axle Shaft
Vehicle Fitment- 2008 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
$103.69Product Specifications- Notes: Std Kit; 8.25'' Ring Gear:;Std Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499255
- Width: 2.50"
- Part Description: 2008 Chrysler Aspen Rear Differential Rebuild Kit
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | 8 Cyl 4.7L
- 2008 Chrysler Aspen | All Trims | 8 Cyl 5.7L
$108.74Product Specifications- Notes: with Chrysler Axle; with 8.25in Ring Gear
- Part Description: 2008 Chrysler Aspen Rear Differential Master Bearing Kit
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$45.18Product Specifications- Notes: Includes Bearing
- ABS Tone Ring Installed: Not Included
- Length: 6.26"
- Material: Carbon Steel
- OE Part Number: 52069887AE
- Spline Quantity: 29 Spline
- UPC: 019495392958
- Wheel Lug Quantity: 0
- Part Description: 2008 Chrysler Aspen OE Solutions Front Driver Side Inner Axle Shaft
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2008 Chrysler Aspen Grade Performance™ Rear U-Joint
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$24.65Product Specifications- Notes: 9.25" Chrysler Axle
- Cone ID: 1.875"
- Cone Length: 1"
- Cone Radius: 0.14"
- UPC: 085311057615
- Width: 1"
- Part Description: 2008 Chrysler Aspen Rear Outer Axle Shaft Bearing
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$30.17 MSRP:$45.15You Save: $14.98 (34%)Product Specifications- Notes: 2WD; 4WD; Aspen
- Location: Driver Side; Passenger Side
- Other Names: Axle Seal, Differential Cover Seal, Seal
- Item Dimensions: 0.8 x 3.2 x 3.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chrysler Aspen Seal-Axle Drive Shaft
Vehicle Fitment- 2008 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
$314.27Product Specifications- Notes: with 59-1/4" (1505 mm) Long Driveshaft;with 144 Transfer Case;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Greasable: No
- Length: 59.25"
- Length (mm): 1505
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Tubing Outer Diameter (in): 3.00"
- Part Description: 2008 Chrysler Aspen Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$48.72Product Specifications- Notes: w/New Process 140 Transfer Case; 1Spd; Full Time 4WD
- Type: A-1
- Part Description: 2008 Chrysler Aspen Differential Bearing
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; Inside Lock Rings
- Bearing Cap Diameter: 1.125"
- Lock Ring Type: Internal
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286531055
- Part Description: 2008 Chrysler Aspen Grade Performance™ Rear U-Joint
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$21.86Product Specifications- Notes: w/New Process 244HD Transfer Case; 2Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2008 Chrysler Aspen Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$18.59Product Specifications- Notes: 9.25" Chrysler Axle
- Cone ID: 1.968"
- Cone Length: 0.866"
- Cone Radius: 0.14"
- OE Part Number: 68003555AA, 68050211AB, 05072506AA, 9759JLM704649, 3723149, 5072506AA
- UPC: 085311057332
- Width: 0.861"
- Part Description: 2008 Chrysler Aspen Rear Axle Shaft Bearing
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$23.66 MSRP:$35.25You Save: $11.59 (33%)Product Specifications- Notes: 4WD; Aspen
- Location: Driver Side; Passenger Side
- Item Dimensions: 0.9 x 2.8 x 3.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chrysler Aspen Seal-Axle Drive Shaft
Vehicle Fitment- 2008 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
$16.65Product Specifications- Notes: Brute Force Greaseable
- Inside Lock-Up 1: 2.557"
- Outer Diameter: 1.125"
- UPC: 085311099189
- Part Description: 2008 Chrysler Aspen Center Greaseable U Joint
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | 8 Cyl 4.7L
- 2008 Chrysler Aspen | All Trims | 8 Cyl 5.7L
- 2008 Chrysler Aspen | All Trims | All Engines
$18.17Product Specifications- Notes: with Chrysler Axle; with 9.25in Ring Gear
- Part Description: 2008 Chrysler Aspen Rear Inner Differential Pinion Race
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$9.48Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 2008 Chrysler Aspen Spicer 1310 Series Grade Standard U-Joint
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$17.07Product Specifications- Notes: with Chrysler Axle; with 8.25in Ring Gear
- UPC: 724956020683
- Part Description: 2008 Chrysler Aspen Front Outer Differential Pinion Bearing
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$15.97Product Specifications- Notes: 8.25" Chrysler Axle:
- Cone ID: 1.781"
- Cone Length: 0.781"
- Cone Radius: 0.14"
- Cup Length: 0.656"
- Cup Radius: 0.03"
- OE Part Number: ZZL127305, 9759BR36, BTC9001, 9739NO36SET, ZZL127307, 4864213, 5R3Z4220AA, 5135660AB
- Outside Diameter: 3.062"
- UPC: 085311068826
- Width: 0.843"
- Part Description: 2008 Chrysler Aspen Rear Axle Shaft Bearing Kit
Vehicle Fitment- 2008 Chrysler Aspen | All Trims | All Engines
$9.65 MSRP:$14.10You Save: $4.45 (32%)Product Specifications- Item Dimensions: 9.1 x 7.1 x 5.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5010884AC, 5010884AA, 4318025, J8993317, MD997740
- Part Description: 2008 Chrysler Aspen *SEALER-None
Vehicle Fitment- 2008 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
1-30 of 162 Results
< Previous
12345
Next >