< Back ×
2008 Dodge Charger Driveline, Axles & 4WD
My Vehicle Change Vehicle
2008 Dodge Charger
$456.80Product Specifications- Length: 63.25"
- Material: Steel
- Outside Diameter: 2.5"
- UPC: 037495122191
- Wall Thickness: 0.083"
- Part Description: 2008 Dodge Charger OE Solutions Rear Driveshaft
Vehicle Fitment- 2008 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2008 Dodge Charger | All Trims | 8 Cyl 5.7L
$46.90Product Specifications- Notes: BEARING ID / BORE: 1.1811 INCH / 30 MM;CENTERLINE: 3.50 INCH / 89 MM;MOUNT WIDTH: 7.38 INCH / 187 MM;STYLE: TRADITIONAL;ELEVATED MOUNTING PLATFORM;
- Inside Diameter: 1.181"
- OE Part Number: 5161465AA
- Style: Traditional
- UPC: 081106060679
- Part Description: 2008 Dodge Charger Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2008 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2008 Dodge Charger | All Trims | 8 Cyl 6.1L
- 2008 Dodge Charger | All Trims | 8 Cyl 5.7L
$103.54Product Specifications- Attachment Method: Bolts
- Bolt Hole Quantity: 6
- Bolt Hole Size (mm): 12.1
- Bolt Pattern Diameter (mm): 99.75
- Color: Black
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Location: Rear Driveshaft at Transfer Case
- Material: Steel. Rubber
- Sleeve Length (mm): 32
- Universal Fit: No
- UPC: 885484426108
- Part Description: 2008 Dodge Charger OE Solutions Driveshaft Flex Joint
Vehicle Fitment- 2008 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2008 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2008 Dodge Charger | All Trims | 8 Cyl 5.7L
$17.13Product Specifications- Cup Length: 0.906"
- Cup Radius: 0.13"
- Outside Diameter: 3.500"
- UPC: 085311057561
- Width: 1.187"
- Part Description: 2008 Dodge Charger Rear Axle Shaft Bearing Race
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$59.65Product Specifications- Notes: with ZF Axle; with 198mm Ring Gear
- Part Description: 2008 Dodge Charger Driver Side Differential Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$328.89 MSRP:$505.00You Save: $176.11 (35%)Product Specifications- Notes: Charger, Magnum, 300; W/O Performance Suspension; W/O Touring Suspension; W/Performance Susp
- Location: Driver Side; Passenger Side
- Item Dimensions: 1.9 x 2.9 x 3.0 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 68045330AA, 68045330AB, 4782735AA
- Part Description: 2008 Dodge Charger Link-Tension
Vehicle Fitment- 2008 Dodge Charger | Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
$53.60Product Specifications- Notes: Bearings ID = 1.181" (30mm)
- UPC: 656591065005
- Part Description: 2008 Dodge Charger Driveshaft Center Support
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$115.34Product Specifications- Notes: Includes Rubber Coated ABS Ring
- ABS Ring Included: Yes
- ABS Ring Tooth Count: 96
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 27
- Length: 32 9/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 27
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2008 Dodge Charger Remanufactured CV Axle Assembly
Vehicle Fitment- 2008 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2008 Dodge Charger | All Trims | 8 Cyl 5.7L
$94.91Product Specifications- Attachment Method: Bolts
- Bolt Hole Quantity: 6
- Bolt Hole Size (mm): 10
- Bolt Pattern Diameter (mm): 148
- Color: Black
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Steel. Rubber
- OE Part Number: 5140311AA
- Sleeve Length (mm): 31.5
- Universal Fit: No
- UPC: 019495344629
- Part Description: 2008 Dodge Charger OE Solutions Front Driveshaft Flex Joint
Vehicle Fitment- 2008 Dodge Charger | All Trims | 6 Cyl 3.5L
$31.12Product Specifications- Notes: with ZF Axle; with 198mm Ring Gear
- UPC: 724956005932
- Part Description: 2008 Dodge Charger Rear Inner Differential Pinion Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$107.00Product Specifications- Notes: Includes Rubber Coated ABS Ring
- ABS Ring Included: Yes
- ABS Ring Tooth Count: 96
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 34
- Length: 22 13/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 27
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2008 Dodge Charger Remanufactured CV Axle Assembly
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
- $328.89 MSRP:
$505.00You Save: $176.11 (35%)Product Specifications- Notes: Charger, Magnum, 300; W/O Performance Suspension; W/O Touring Suspension; W/Performance Susp
- Location: Driver Side; Passenger Side
- Item Dimensions: 1.9 x 2.9 x 3.0 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 68045330AA, 68045330AB, 4782735AA
- Part Description: 2008 Dodge Charger Link-Tension
Vehicle Fitment- 2008 Dodge Charger | Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
$75.00Product Specifications- Attachment Method: Bolts
- Bolt Hole Quantity: 6
- Bolt Hole Size (mm): 12
- Bolt Pattern Diameter (mm): 152.4
- Finish: Black
- Installation Hardware Included: No
- Material: Rubber. Steel
- OE Part Number: 5166338AA, 5127291AA
- Sleeve Length (mm): 31.75
- Universal Fit: No
- UPC: 019495344650
- Part Description: 2008 Dodge Charger OE Solutions Front Driveshaft Flex Joint
Vehicle Fitment- 2008 Dodge Charger | All Trims | 8 Cyl 5.7L
$29.93Product Specifications- Notes: w/Borg-Warner 4440 Transfer Case; 1Spd; Full Time 4WD
- Type: A-1
- Part Description: 2008 Dodge Charger Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$72.72Product Specifications- Attachment Method: Bolts
- Bolt Hole Quantity: 8
- Bolt Hole Size (mm): 12
- Bolt Pattern Diameter (mm): 110
- Color: Black
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Steel. Rubber
- OE Part Number: 1294100115, 5142478AA
- Sleeve Length (mm): 25.8
- Universal Fit: No
- UPC: 019495300441
- Part Description: 2008 Dodge Charger OE Solutions Rear Driveshaft Flex Joint
Vehicle Fitment- 2008 Dodge Charger | All Trims | 8 Cyl 6.1L
$21.86Product Specifications- Notes: w/Borg-Warner 4440 Transfer Case; 1Spd; Full Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2008 Dodge Charger Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
Dorman® OE Solutions Rear Driveshaft Center Support Bearing for 2008 Dodge Charger
PartNumber: 934-301$60.08Product Specifications- Bracket Material: Steel
- Inside Diameter: 30 mm
- Installation Hardware Included: No
- Installation Instructions Included: No
- Mounting Bracket Included: Yes
- Mounting Hole Quantity: 2
- OE Part Number: 5161435AA
- Support Bearing Type: Housing Mounted Bearing
- UPC: 019495374756
- Width: 7.38"
- Part Description: 2008 Dodge Charger OE Solutions Rear Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$22.59 MSRP:$33.65You Save: $11.06 (33%)Product Specifications- Notes: Lower
- Other Names: Differential Mount, Lower Mount
- Item Dimensions: 1.2 x 3.0 x 5.6 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Dodge Charger Mount-Differential
Vehicle Fitment- 2008 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
$26.39Product Specifications- Notes: Only Works w/Dorman Driveshaft 936-400
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Finish: Steel
- Coating Type: Grease
- Color/Finish: Silver
- Greasable: No
- Grease Type: Multi Purpose Bearing Grease
- Grease Zerks Included: No
- Length Between Inside Snap Rings Axis 1 (In): 2.438"
- Length Between Inside Snap Rings Axis 2 (In): 2.438"
- Package Contents: 1 Universal Joint, 4 Snap Rings
- Pre Greased: Yes
- Seal Material: Rubber
- Snap Ring Type: External
- Universal Joint Cross Material: Steel
- UPC: 885484839328
- Part Description: 2008 Dodge Charger Rear Driveshaft Repair Kit
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$8.03Product Specifications- Notes: FAG Global# 6206
- Bearing Inside Diameter: 1.181; 29.997
- Bearing Outside Diameter: 2.441; 62.001
- Length: 0.63; 16.002
- UPC: 670774196812
- Part Description: 2008 Dodge Charger Rear Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$19.56Product Specifications- Notes: with ZF Axle; with 198mm Ring Gear
- Part Description: 2008 Dodge Charger Front Inner Differential Pinion Race
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$8.60Product Specifications- Notes: with ZF Axle; with 198mm Ring Gear
- Part Description: 2008 Dodge Charger Front Inner Differential Pinion Race
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$17.96Product Specifications- Notes: with ZF Axle; with 198mm Ring Gear
- Part Description: 2008 Dodge Charger Front Inner Differential Pinion Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$272.15 MSRP:$410.00You Save: $137.85 (34%)Product Specifications- Notes: W/AWD; Charger, Magnum, 300
- Location: Driver Side; Passenger Side
- Item Dimensions: 6.7 x 7.7 x 7.6 inches
- Item Weight: 10.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 4779218AB, 4779328AA
- Part Description: 2008 Dodge Charger Wheel Bearing
Vehicle Fitment- 2008 Dodge Charger | Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
$303.35Product Specifications- Drive Shaft Diameter (In): 2"
- Drive Shaft Wall Thickness (In): 0.083"
- Greaseable Drive Shaft: Yes
- Length: 25.5"
- Material: Steel
- OE Part Number: 4593542AB
- Outside Diameter: 2"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Automatic
- UPC: 037495124652
- Wall Thickness: 0.083"
- Part Description: 2008 Dodge Charger OE Solutions Front Driveshaft
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$545.71Product Specifications- Notes: Measurement taken from end of flange face to end of flange face;with 25-1/8" (638 mm) Long Driveshaft;Supplied as new
- Greasable: No
- Length: 25.125"
- Length (mm): 638
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2008 Dodge Charger Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$114.67Product Specifications- Notes: Includes Rubber Coated ABS Ring
- ABS Ring Included: Yes
- ABS Ring Tooth Count: 96
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 27
- Length: 31 7/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 27
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2008 Dodge Charger Remanufactured CV Axle Assembly
Vehicle Fitment- 2008 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2008 Dodge Charger | All Trims | 6 Cyl 3.5L
$22.24Product Specifications- Notes: with ZF Axle; with 175mm Ring Gear
- Part Description: 2008 Dodge Charger Rear Inner Differential Pinion Bearing
Vehicle Fitment- 2008 Dodge Charger | All Trims | All Engines
$123.71Product Specifications- Notes: Includes Rubber Coated ABS Ring
- ABS Ring Included: Yes
- ABS Ring Tooth Count: 96
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 27
- Length: 33 1/8"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 27
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2008 Dodge Charger Remanufactured CV Axle Assembly
Vehicle Fitment- 2008 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2008 Dodge Charger | All Trims | 8 Cyl 5.7L
$51.12 MSRP:$76.40You Save: $25.28 (34%)Product Specifications- Notes: Charger, Magnum, 300
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.5 x 2.2 x 2.2 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 4895235AA
- Part Description: 2008 Dodge Charger BUSHING-Spring Link
Vehicle Fitment- 2008 Dodge Charger | Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
1-30 of 127 Results
< Previous
12345
Next >