< Back ×
2008 Toyota Tacoma Driveline, Axles & 4WD
My Vehicle Change Vehicle
2008 Toyota Tacoma
$258.25Product Specifications- Connector Gender: Female
- Connector Shape: Eliptical
- Four Wheel on Demand Conversion: No
- Housing Material: Steel
- Mounting Hardware Included: No
- OE Part Number: 41400-35031, 41400-35032, 4140035033
- Package Contents: 4WD Actuator
- Package Quantity: 1
- Packaging Type: Box
- Terminal Gender: Male
- Terminal Quantity: 6
- Terminal Type: Blade
- UPC: 019495548256
- Wiring Harness Included: No
- Part Description: 2008 Toyota Tacoma OE Solutions 4Wd Actuator
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$45.65Product Specifications- Notes: BEARING ID / BORE: 1.1811" / 30 MM;CENTERLINE: 0.50" / 13 MM;MOUNT WIDTH: 6.00" / 152 MM;
- Inside Diameter: 1.181"
- OE Part Number: 37230-35130
- UPC: 081106060747
- Part Description: 2008 Toyota Tacoma Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | 4 Cyl 2.7L
- 2008 Toyota Tacoma | Pre Runner | 4 Cyl 2.7L
- 2008 Toyota Tacoma | All Trims | 6 Cyl 4.0L
- 2008 Toyota Tacoma | Pre Runner | 6 Cyl 4.0L
- 2008 Toyota Tacoma | SR5 Prerunner | 6 Cyl 4.0L
- 2008 Toyota Tacoma | TRD Sport Prerunner | 6 Cyl 4.0L
$403.15Product Specifications- Notes: Master Kit; w/ 8.4" Ring Gear w/o Locking Diff.:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311550611
- Width: 2.50"
- Part Description: 2008 Toyota Tacoma Rear Master Differential Rebuild Kit
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$67.73Product Specifications- Bracket Material: Steel
- Inside Diameter: 1.181"
- Installation Hardware Included: Not Required
- Installation Instructions Included: No
- Mounting Bracket Included: Yes
- Mounting Hole Quantity: 2
- OE Part Number: 37230-35130
- Support Bearing Type: Housing Mounted Bearing
- UPC: 019495300069
- Width: 6"
- Part Description: 2008 Toyota Tacoma OE Solutions Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$404.02Product Specifications- UPC: 030915587600
- Part Description: 2008 Toyota Tacoma Rear Differential Lock Actuator
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$16.50 MSRP:$23.76You Save: $7.26 (31%)Product Specifications- Notes: Tacoma; Right
- Other Names: Tube Seal; Oil Seal, Front Drive Shaft, Right Hand; Oil Seal, Front Drive Shaft, Left Hand
- Item Dimensions: 13.3 x 11.2 x 2.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Toyota Tacoma Tube Oil Seal
Vehicle Fitment- 2008 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5, S-Runner, TRD Pro, X-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS
$21.52Product Specifications- Notes: Uni-Fit; Joint Dia 3.5"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.5"
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.75"
- Material: Silicone
- Number of Clamps: 2
- Rib Quantity: 6
- Shaft End Inside Diameter: 1.15"
- Split Or Solid Type: Solid
- UPC: 019495800804
- Part Description: 2008 Toyota Tacoma OE Solutions Front Inner Cv Joint Boot Kit
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | 6 Cyl 4.0L
$37.15Product Specifications- Notes: BEARING ID / BORE: 1.1811" / 30 MM;CENTERLINE: 0.50" / 13 MM;MOUNT WIDTH: 6.00" / 152 MM;
- Inside Diameter: 1.181"
- OE Part Number: 37230-35120
- UPC: 081106060730
- Part Description: 2008 Toyota Tacoma Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Toyota Tacoma | Base | 4 Cyl 2.7L
- 2008 Toyota Tacoma | Base | 6 Cyl 4.0L
$319.33Product Specifications- Notes: Standard Kit; w/ 8.4" Ring Gear w/o Locking Diff.:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311550598
- Width: 2.50"
- Part Description: 2008 Toyota Tacoma Rear Differential Rebuild Kit
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$50.11Product Specifications- UPC: 656591052272
- Part Description: 2008 Toyota Tacoma Driveshaft Center Support
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$18.24Product Specifications- Notes: Uni-Fit; Joint Dia 3.44";Uni-Fit; Joint Dia 3.44"; Packaging Type: Box; Pkg Quantity: 1
- Boot Color: Black
- Boot Material: Neoprene
- Joint End Inside Diameter: 4"
- Package Contents: 1 CV Joint Boot; 1 CV Joint Grease Pack; 2 Clamps
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.98"
- Split Or Solid Type: Solid
- UPC: 019495800798
- Vented Boot: No
- Part Description: 2008 Toyota Tacoma OE Solutions Front Outer Cv Joint Boot Kit
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | 6 Cyl 4.0L
$14.78 MSRP:$21.28You Save: $6.50 (31%)Product Specifications- Notes: W/Prerunner; 4 Wheel Drive; Tacoma
- Location: Driver Side; Passenger Side
- Other Names: Outer Seal; Seal, Oil (For Front Axle Hub Right Hand); Seal, Oil (For Front Axle Hub Left Hand); Wheel Seal
- Item Dimensions: 6.5 x 2.7 x 6.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Toyota Tacoma Axle Seal
Vehicle Fitment- 2008 Toyota Tacoma | Base, Limited, Nightshade, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
$15.86Product Specifications- Notes: w/Aisin VF2BM Transfer Case; 2Spd; w/Part Time 4WD
- Type: 72
- Part Description: 2008 Toyota Tacoma Differential Crankshaft Seal
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$40.73Product Specifications- UPC: 656591052258
- Part Description: 2008 Toyota Tacoma Driveshaft Center Support
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$8.38Product Specifications- Notes: Packaging Type: Box
- Filter/Vent Diameter (in): 0.2"
- Height: 1.2"
- Inlet Flange Diameter (in): 0.4"
- Inlet Flange Length (In): 0.04"
- Item Grade: Standard Replacement
- Material: Steel
- OE Part Number: 90930-03031
- UPC: 037495103701
- Part Description: 2008 Toyota Tacoma OE Solution Rear Axle Vent
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$15.40Product Specifications- Notes: Grease Fitting in Cross; Perf Grade;Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 2008 Toyota Tacoma Grade Performance™ Rear U-Joint
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$73.54Product Specifications- Notes: Locking Diff.;w/8" Ring Gear & Locking Diff.:
- Cone ID: 2.952"
- Cone Length: 0.809"
- Cone Radius: 1.75"
- Cup Length: 0.629"
- Cup Radius: 0.08"
- Outside Diameter: 4.133"
- UPC: 085311531719
- Width: 0.811"
- Part Description: 2008 Toyota Tacoma Rear Driver Side Axle Shaft Bearing Kit
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$5.25 MSRP:$7.56You Save: $2.31 (31%)Product Specifications- Notes: W/Prerunner; 4 Wheel Drive
- Location: Driver Side; Passenger Side
- Other Names: Wheel Bearing O-Ring
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 90301-92001
- Part Description: 2008 Toyota Tacoma Bearing O-Ring
Vehicle Fitment- 2008 Toyota Tacoma | Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
$54.56Product Specifications- Notes: Bearing & Support
- Bolt Hole Center: 5.774"
- Inside Diameter: 1.181"
- OE Part Number: 37230-35130, 9759HB238040, 372300K030
- Outside Diameter: 4.286"
- UPC: 085311228138
- Width: 2.308"
- Part Description: 2008 Toyota Tacoma Driveshaft Center Support Bearing
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$5.41Product Specifications- Notes: Packaging Type: Box
- Filter/Vent Diameter (in): 0.204 In.
- Height: 1.69 In.
- Inlet Flange Diameter (in): 0.36 In.
- Inlet Flange Length (In): 0.86 In.
- Installation Hardware Included: t Required
- Item Grade: Standard Replacement
- Material: Metal and Plastic
- OE Part Number: 90930-03136
- UPC: 019495451792
- Part Description: 2008 Toyota Tacoma OE Solution Front Axle Vent
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$10.55Product Specifications- Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross;Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft;Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Type: Plain
- Greasable: Yes
- Length Axis 1: 3.62
- Length Axis 2: 3.62
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Style: 4 Round Plain Bearings
- Universal Joint Style: Spicer 1330
- UPC: 083286002135
- Width: 3.622" Overall Axis
- Part Description: 2008 Toyota Tacoma Grade Standard U-Joint
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$87.51Product Specifications- Notes: Supplied with Standard Neoprene Outboard Boot
- ABS Ring Included: No
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 30
- Length: 25 1/2"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 30
- Product Condition: Remanufactured
- Spindle Nut Included: No
- Part Description: 2008 Toyota Tacoma Remanufactured CV Axle Assembly
Vehicle Fitment- 2008 Toyota Tacoma | Base | All Engines
$39.49Product Specifications- Notes: w/8.4" Ring Gear w/o Locking Diff.:
- Cone ID: 2"
- Cone Length: 0.826"
- Cone Radius: 0.078"
- Cup Length: 0.708"
- Cup Radius: 0.078"
- Outside Diameter: 3.385"
- UPC: 085311531689
- Width: 0.886"
- Part Description: 2008 Toyota Tacoma Rear Axle Shaft Bearing Kit
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
- 2008 Toyota Tacoma | All Trims | 6 Cyl 4.0L
$2.56 MSRP:$3.68You Save: $1.12 (31%)Product Specifications- Notes: 2 Wheel Drive, W/Prerunner; 4 Wheel Drive
- Location: Driver Side; Passenger Side
- Other Names: Gasket; Gasket, Brake Drum Oil Deflector, Right Hand; Gasket, Brake Drum Oil Deflector, Left Hand
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Toyota Tacoma Rotor Gasket
Vehicle Fitment- 2008 Toyota Tacoma | Base, Limited, Pre Runner, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
$9.67Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl Inside & Outside Lock Rings;Std Grade; Grease Fitting in Cross; Incl Inside & Outside Lock Rings;Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl Inside & Outside Lock Rings
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Grooved
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.66
- Length Axis 2: 2.66
- Lock Ring Location: External, Internal
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel
- Mounting Hardware Included: Yes
- Style: 4 Grooved Round Bearings
- UPC: 826732926728
- Weight (Gross Pounds): 1.30
- Width (Inch): 3.50
- Part Description: 2008 Toyota Tacoma Grade Standard U-Joint
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$569.54Product Specifications- Notes: with 79-5/16" (2015 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face;Supplied as new
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length (in): 79.312
- Length (mm): 2015
- Measurement Method: Measurement Taken from End of Flange Face to End of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 3.5
- Tubing Outer Diameter (mm): 89
- Part Description: 2008 Toyota Tacoma Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Toyota Tacoma | Base | 6 Cyl 4.0L
- 2008 Toyota Tacoma | X-Runner | 6 Cyl 4.0L
$26.87Product Specifications- Notes: 8.00" Ring Gear:;Locking Diff.
- Cone ID: 1.181"
- Cone Length: 0.905"
- Cone Radius: 0.059"
- Cup Length: 0.649"
- Cup Radius: 0.059"
- Outside Diameter: 2.834"
- UPC: 085311473323
- Width: 0.944"
- Part Description: 2008 Toyota Tacoma Rear Outer Axle Shaft Bearing Kit
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$823.45Product Specifications- Notes: with 92-7/8" (2358 mm) Long Driveshaft;Measurement taken from end of input shaft to end of flange face; Supplied as new
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length (in): 92.875
- Length (mm): 2358
- Measurement Method: Measurement Taken from End of Input Shaft to End of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 3
- Tubing Outer Diameter (mm): 76
- Part Description: 2008 Toyota Tacoma Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2008 Toyota Tacoma | Pre Runner | 6 Cyl 4.0L
- 2008 Toyota Tacoma | SR5 Prerunner | 6 Cyl 4.0L
- 2008 Toyota Tacoma | TRD Sport Prerunner | 6 Cyl 4.0L
$16.83Product Specifications- Notes: w/o Locking Diff.
- Cone ID: 1.375"
- Cone Length: 1"
- Cone Radius: 0.09"
- OE Part Number: 8970844670, 9036634019, 0019816905, C0DW4625A, 3156066, XW3706, 1549628, 926803, C0WD4625A, COWD4625A, 79192186, 5086690AA, 90368-34049, 9759HM88649, 33 12 1 468 894, 1-206-573, 2070079, 8729113, N058570, C0WD4630A, 2070070, 1L2Z1201AA, 1-204-304, 1458HM8
- UPC: 085311056199
- Width: 1"
- Part Description: 2008 Toyota Tacoma Front Outer Axle Shaft Bearing
Vehicle Fitment- 2008 Toyota Tacoma | All Trims | All Engines
$2429.92 MSRP:$3583.19You Save: $1153.27 (33%)Product Specifications- Notes: 2 Wheel Drive, W/Prerunner, W/Locking Diffrntl, Auto Trans; 4 Wheel Drive, Access Cab W/Locking Diffrntl., Auto Trans; Tacoma; 4.0l; W/O X-Runner; W/O Limited Slip; W/Rear Diff. Lock
- Other Names: Carrier Assembly
- Item Dimensions: 17.7 x 12.7 x 12.6 inches
- Item Weight: 76.30 Pounds
- Replaces: 41110-35A20
- Part Description: 2008 Toyota Tacoma Carrier Assembly
Vehicle Fitment- 2008 Toyota Tacoma | Base, Pre Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
1-30 of 154 Results
< Previous
12345
Next >