157 products about 2009 Dodge Charger A/C & Heating found
Filter Results
Sort
View by
Product Specifications- Notes: w/Manual AC Controls; Remanufactured
- Automatic Temperature Control: No
- Connector Gender: Female
- Connector Quantity: 2
- Housing Color: Black
- Instruction Manual Included: No
- Mounting Hardware Included: No
- Mounting Type: Bolt On
- OE Part Number: 55111870AC, 55111870AD, 55111870AE, 55111870AF, 55111870AG, 55111870AH, 55111870AI, 55111870AJ, 55111870AK, 55111870AL, 55111871AA, 55111871AB, 55111871AC, 55111871AD, 55111871AE
- Package Contents: 1 HVAC Control Module
- Programming Required: No
- Terminal Gender: Male
- Terminal Quantity: 7
- Terminal Type: Pin
- UPC: 019495911357
- Part Description: 2009 Dodge Charger Remanufactured Climate Control Module
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | All Engines
Product Specifications- Notes: Coolant Tube
- Color Finish: Black/Coated
- Coolant Hose Heat Shield Included: No Heat Shield Required
- Coolant Hose Length: 23"
- Coolant Hose Material: Steel
- Coolant Hose Protective Sleeve Included: No Protective Sleeve Required
- Coolant Hose Type: Single I.D. (Inside Diameter)
- End 1 Attachment Type: Hose
- End 2 Attachment Type: Straight
- Hose End 1 Inside Diameter in: 0.54"
- Hose End 1 outside Diameter in: 0.63"
- Hose End 2 Inside Diameter in: 0.45"
- Hose End 2 Outside Diameter In: 0.62"
- Maximum Working Pressure Psi: 100 PSI
- OE Part Number: 4892346AD
- Package Contents: Heater Hose Assembly
- Package Quantity: 1
- Packaging Type: Bag
- Thermostatically Controlled: No
- UPC: 885484528376
- With Clamps: No
- Part Description: 2009 Dodge Charger Hvac Heater Hose Assembly
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Product Specifications- Notes: w/ 10S17C Compressor; Reman w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.125
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10S17C
- Discharge Port Type: O-Ring
- Distance From Clutch To Mounting Flange: 2.265625
- Mount Distance MM: 57.404
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24068] / Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24069] / Gasket
- O-Ring B Quantity: 1
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 130.175
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 5.125
- Pulley Outside Diameter: 5.125
- Pulley Ridge Diameter: 5.125
- Refrigerant Type: R134a
- Suction Port Type: O-Ring
- Terminal Type: Pin
- UPC: 096361973091
- Part Description: 2009 Dodge Charger Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
Product Specifications- Notes: w/HD Cooling
- UPC: 671607210804
- Part Description: 2009 Dodge Charger A/C Accumulator
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | All Engines
Product Specifications- Clutch Maximum Diameter: 131.0 mm
- Compressor Mount Hole Quantity: 4
- Mounting Type: Bolt Tangent
- OE Part Number: 55111034AA, R5111034AB
- Pulley Belt Type: Serpentine
- Refrigerant Type: R134A
- UPC: 042511192720
- Part Description: 2009 Dodge Charger A/C Compressor with Clutch
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
$26.55 MSRP: $39.45
You Save: $12.90 (33%)
Product Specifications- Notes: 2008-10
- Item Dimensions: 1.1 x 1.4 x 3.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 4685590AB, 5026362AA, 6AL38LXHAA, 6AL38DX9AA
- Part Description: 2009 Dodge Charger Outlet
More Info Vehicle Fitment- 2009 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
Product Specifications- Notes: w/SUB COOL Design; Std & HD Cooling; w/PS Cooler
- Box Height (in): 6 1/2
- Box Length (in): 31 1/2
- Box Weight (lbs): 13 7/8
- Box Width (in): 26 3/8
- Construction: parallel flow
- Core Length: 24 3/8
- Core Thickness: 6/7
- Core Width: 19
- Hazardous Material: No
- Inlet Tube: Block Fitting
- OE Part Number: 68050127AB, CH3030241
- Outlet Tube: Block Fitting
- Tech Note: Supplied with SUB COOL Design Technology
- UPC: 710353105856
- Part Description: 2009 Dodge Charger A/C Condenser
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2009 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
Show More Product Specifications- Notes: K&N Cabin Filter
- Filter Material: Non-woven Synthetic
- Filter Quantity: 1
- Filter Type: Electrostatic
- Height: 1.188" (30 mm)
- Length: 12.25" (311 mm)
- UPC: 024844348258
- Width: 8.375" (213 mm)
- Part Description: 2009 Dodge Charger Cabin Air Filter
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2009 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Show More Product Specifications- Includes Drier: No
- Mounting Hardware Included: No
- UPC: 042511208070
- Part Description: 2009 Dodge Charger A/C Condenser
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2009 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Show More Product Specifications- Notes: Hose
- Branch Quantity: 3
- Color/Finish: Natural
- Contains Spring: No
- Coolant Hose Heat Shield Included: No
- Coolant Hose Length: 16.5"; 5"; 10"
- Coolant Hose Material: Steel/Rubber
- Coolant Hose Protective Sleeve Included: No
- Coolant Hose Type: Branched
- End 1 Attachment Type: Clamp
- End 2 Attachment Type: Clamp
- End 3 Attachment Type: Barbed
- Grade Type: Regular
- Hose End (1) Inside Diameter (In): 0.24"
- Hose End (1) Outside Diameter (In): 0.414"
- Hose End (2) Inside Diameter (In): 0.656"
- Hose End (2) Outside Diameter (In): 0.843"
- Hose End (3) Inside Diameter (In): 0.643"
- Hose End (3) Outside Diameter (In): 0.85"
- Hose Shape: Molded Assembly
- Maximum Working Pressure (psi): 100 PSI
- OE Part Number: 55038134AF
- Package Contents: 1 Heater Hose Assembly
- Thermostatically Controlled: No
- UPC: 885484272507
- With Clamps: Yes
- Part Description: 2009 Dodge Charger Hvac Heater Hose Assembly
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
Product Specifications- Notes: w/ 10S17C Compressor; Reman w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.750
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Head Type: X049
- Compressor Type: 10S17C
- Discharge Port Type: O-Ring
- Distance From Clutch To Mounting Flange: 1.59375
- Mount Distance MM: 40.386
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: Remanufactured
- O-Ring A Number/Desc: [24068] / Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24069] / Gasket
- O-Ring B Quantity: 1
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 120.650
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.750
- Pulley Outside Diameter: 4.750
- Pulley Ridge Diameter: 4.750
- Refrigerant Type: R134a
- Suction Port Type: O-Ring
- Terminal Type: Pin
- UPC: 096361973466
- Part Description: 2009 Dodge Charger Remanufactured A C Compressor With Clutch
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
$24.06 MSRP: $35.80
You Save: $11.74 (33%)
Product Specifications- Item Dimensions: 1.5 x 2.2 x 2.3 inches
- Item Weight: 0.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 68518243AA
- Part Description: 2009 Dodge Charger Sensor-Ambient Temperature
More Info Product Specifications- Notes: w/Severe Duty Cooling
- UPC: 671607228526
- Part Description: 2009 Dodge Charger A/C Accumulator
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | All Engines
Product Specifications- Notes: w/SUB COOL Design; w/o PS Cooler
- Box Height (in): 6
- Box Length (in): 31 1/9
- Box Weight (lbs): 12 6/7
- Box Width (in): 22
- Construction: parallel flow
- Core Length: 24 2/7
- Core Thickness: 6/7
- Core Width: 18 1/3
- Hazardous Material: No
- Inlet Tube: Block Fitting
- OE Part Number: 5137693AD, CH3030210, 5137693AC
- Outlet Tube: Block Fitting
- Tech Note: Supplied with SUB COOL Design Technology
- UPC: 710353105573
- Part Description: 2009 Dodge Charger A/C Condenser
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2009 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Show More Product Specifications- Notes: OE recommended replacement part.
- OE Part Number: 5139687AA
- Type: Block valve
- UPC: 042511223448
- Part Description: 2009 Dodge Charger A/C Expansion Valve
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2009 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Show More Product Specifications- Notes: w/ 10SRE20C Compressor; New w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.875
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10SRE20C
- Discharge Port Type: O-Ring / Gasket
- Distance From Clutch To Mounting Flange: 0.609375
- Mount Distance MM: 15.494
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24068] / Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24069] / Gasket
- O-Ring B Quantity: 1
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 123.825
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.875
- Pulley Outside Diameter: 4.875
- Pulley Ridge Diameter: 4.875
- Refrigerant Type: R134a
- Suction Port Type: O-Ring / Gasket
- Terminal Type: Pin
- UPC: 096361622197
- Part Description: 2009 Dodge Charger A C Compressor With Clutch
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
Product Specifications- Notes: w/ 10S17C Compressor; New w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 5.125
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10S17C
- Discharge Port Type: O-Ring
- Distance From Clutch To Mounting Flange: 2.265625
- Mount Distance MM: 57.404
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24068] / Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24069] / Gasket
- O-Ring B Quantity: 1
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 130.175
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 5.125
- Pulley Outside Diameter: 5.125
- Pulley Ridge Diameter: 5.125
- Refrigerant Type: R134a
- Suction Port Type: O-Ring
- Terminal Type: Pin
- UPC: 096361983090
- Part Description: 2009 Dodge Charger A C Compressor With Clutch
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
$54.14 MSRP: $80.65
You Save: $26.51 (33%)
Product Specifications- Notes: Charger, Magnum, 300; 5.7 & 6.1 Liter
- Location: Driver Side; Passenger Side
- Other Names: Cooling Fan, Fan Blade, Fan Module, Fan Shroud
- Item Dimensions: 3.3 x 16.2 x 15.9 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Dodge Charger Fan-Cooling
More Info Vehicle Fitment- 2009 Dodge Charger | Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
Product Specifications- Notes: w/ 10S17C Compressor; Heavy Duty Cooling; Includes: 98346 (New Compressor), 83118 (Filter Drier), 39017 (Exp Valve), 59007 (Oil), O-Rings;w/10S17C Compressor; HD Cooling
- Components Included: New Compressor, Filter Drier, Expansion Valve, Oil, and O-Rings
- UPC: 096361087965
- Part Description: 2009 Dodge Charger Complete Air Conditioning Kit w/ New Compressor
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Product Specifications- Notes: w/ 10S17C Compressor; Severe Duty Cooling; Includes: 98346 (New Compressor), 83376 (Filter Drier), 39017 (Exp Valve), 59007 (Oil), O-Rings
- Components Included: New Compressor, Filter Drier, Expansion Valve, Oil, and O-Rings
- UPC: 096361129856
- Part Description: 2009 Dodge Charger A C Compressor Kit
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Product Specifications- Notes: w/ Auto. Temp Control
- Connector Gender: Female / Female
- Number of Terminals: 5 / 2
- Speed: Variable
- UPC: 096361029224
- Part Description: 2009 Dodge Charger Hvac Blower Motor Resistor Block
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | All Engines
Product Specifications- Notes: w/ 10S17C Compressor; New w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.875
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10S17C
- Discharge Port Type: O-Ring / Gasket
- Distance From Clutch To Mounting Flange: 0.609375
- Mount Distance MM: 15.494
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24068] / Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24069] / Gasket
- O-Ring B Quantity: 1
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 123.825
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.875
- Pulley Outside Diameter: 4.875
- Pulley Ridge Diameter: 4.875
- Refrigerant Type: R134a
- Suction Port Type: O-Ring/ Gasket
- Terminal Type: Pin
- UPC: 096361983892
- Part Description: 2009 Dodge Charger A C Compressor With Clutch
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 3.5L
Product Specifications- Notes: Evaporator replacement for this application may require considerable time, specialty tools, and training.
- Core Depth Fraction: 2-9/16
- Core Depth MM: 65.088
- Core Height Fraction: 12-1/8
- Core Height MM: 307.975
- Core Width Fraction: 9-1/4
- Core Width MM: 231.775
- Depth: 2.563
- Height: 12.125
- Inlet Fitting Outside Diameter: No. 8
- Material: Aluminum
- O-Ring A Number/Desc: [24622] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24649] / Green O-Ring
- O-Ring B Quantity: 1
- Outlet Fitting Outside Diameter: No. 12
- UPC: 096361548176
- Width: 9.250
- Part Description: 2009 Dodge Charger A C Evaporator Core
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | All Engines
$92.29 MSRP: $141.00
You Save: $48.71 (35%)
Product Specifications- Other Names: Actuator, Door Actuator
- Item Dimensions: 3.3 x 3.0 x 4.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 68033337AA, 68238243AA
- Part Description: 2009 Dodge Charger Hvac Temperature Valve Actuator
More Info Vehicle Fitment- 2009 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
Product Specifications- Notes: w/ 10S17C Compressor; New w/ Clutch
- Clutch Included: Yes
- Clutch Maximum Diameter: 4.750
- Coil Clock Position: Wire Lead
- Coil Voltage: 12
- Compatible Refrigerant Oil Type: PAG 46
- Compressor Type: 10S17C
- Discharge Port Type: O-Ring
- Distance From Clutch To Mounting Flange: 1.59375
- Mount Distance MM: 40.386
- Mounting Hardware: Not Included
- Mounting Type: Tangent Mount
- New or Reman: New
- O-Ring A Number/Desc: [24068] / Gasket
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24069] / Gasket
- O-Ring B Quantity: 1
- Printed Foot Note: May Require use of OE Manifold
- Pulley Belt Type: Serpentine
- Pulley Diameter MM: 120.650
- Pulley Groove Quantity: 6
- Pulley Lip Diameter: 4.750
- Pulley Outside Diameter: 4.750
- Pulley Ridge Diameter: 4.750
- Refrigerant Type: R134a
- Suction Port Type: O-Ring
- Terminal Type: Pin
- UPC: 096361983465
- Part Description: 2009 Dodge Charger A C Compressor With Clutch
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Product Specifications- Notes: HD Cooling; Incls: Filter Drier, Expansion Valve, Compressor Oil, Necessary O-Rings & Gaskets Kit, Cap & Valve Kit
- Compressor Oil Included: Yes
- Compressor Oil Type: PAG Oil / 46
- Expansion Device Type: Block Type
- Expansion Valve Inlet Type: Insert O-Ring
- Expansion Valve Outlet Type: Insert O-Ring
- Gasket or Seal Included: Yes
- Kit Includes: Filter Drier, Expansion Valve, Compressor Oil, O-Ring/Gasket Pack, Cap and Valve Kit
- Receiver Drier/Accumulator Diameter IN: 2.750
- Receiver Drier/Accumulator Length IN: 9.000
- Receiver Drier/Accumulator Outlet Fitting Size IN: .397
- Receiver Drier/Accumulator Outlet Fitting Type: Pad Mount
- UPC: 096361119796
- Part Description: 2009 Dodge Charger A C Installer Kits With Filter Drier
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2009 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Show More Product Specifications- Notes: w/ Wheel
- Cage Wheel Included: w/ Wheel
- Connector Gender: Female
- Connector qty: 1
- Flanged End: Yes
- Material: Plastic
- Motor Diameter: 3.000
- Motor Length: 3.5625
- Mount Type: OE Mount
- New or Reman: New
- Number of Terminals: 2
- O.E. Replacement: Yes
- Rotation: CCW
- Shaft Diameter: 0.3125
- Shaft Length: 1.0625
- Style: Flanged
- Terminal Type: 2 Lead Wires w/ Connector
- UPC: 096361758421
- Vented: Vented
- Voltage: 12
- Wheel Dia. IN: 6.250
- Wheel Height IN: 3.000
- Part Description: 2009 Dodge Charger Hvac Blower Motor With Wheel
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | All Engines
Product Specifications- Notes: Severe Duty Cooling; Incls: Filter Drier, Expansion Valve, Compressor Oil, Necessary O-Rings & Gaskets Kit, Cap & Valve Kit
- Compressor Oil Included: Yes
- Compressor Oil Type: PAG Oil / 46
- Expansion Device Type: Block Type
- Expansion Valve Inlet Type: Insert O-Ring
- Expansion Valve Outlet Type: Insert O-Ring
- Gasket or Seal Included: Yes
- Kit Includes: Filter Drier, Expansion Valve, Compressor Oil, O-Ring/Gasket Pack, Cap and Valve Kit
- Receiver Drier/Accumulator Diameter IN: 1.5
- Receiver Drier/Accumulator Length IN: 9.8
- Receiver Drier/Accumulator Outlet Fitting Size IN: .438
- Receiver Drier/Accumulator Outlet Fitting Type: Pad Mount
- UPC: 096361119901
- Part Description: 2009 Dodge Charger A C Installer Kits With Filter Drier
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | 6 Cyl 2.7L
- 2009 Dodge Charger | All Trims | 6 Cyl 3.5L
- 2009 Dodge Charger | All Trims | 8 Cyl 5.7L
- 2009 Dodge Charger | All Trims | 8 Cyl 6.1L
Show More Product Specifications- Notes: Harness Connector may be Reqd
- Comp Open/Closed: Variable
- Connector Gender: Female
- Connector Pin Qty: 2
- Connector Shape: Round
- Fitting Gender: Male
- Fitting Thread: 3/8 in. - 24
- Fitting Thread Size: M10 x 1.25
- Item Included A Desc: 24606
- Item Included A Qty.: 1
- Material: Plastic / Metal
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System Mounted
- Number of Terminals: 3
- Open (at 0 psi.): Yes
- Printed Foot Note: May require use of [20954] switch harness.
- UPC: 096361209510
- Weather Pack: Yes
- Part Description: 2009 Dodge Charger System Mounted Pressure Transducer
More Info Vehicle Fitment- 2009 Dodge Charger | All Trims | All Engines
$68.42 MSRP: $99.05
You Save: $30.63 (31%)
Product Specifications- Notes: Charger, Magnum, 300
- Item Dimensions: 0.9 x 1.1 x 2.6 inches
- Item Weight: 0.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Dodge Charger Sensor-Charge Air Temp
More Info Vehicle Fitment- 2009 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS