< Back ×
2010 Ford F-250 Super Duty Driveline, Axles & 4WD
My Vehicle Change Vehicle
2010 Ford F-250 Super Duty
$164.19Product Specifications- Notes: Master Kit; Dana 60 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311500883
- Width: 2.50"
- Part Description: 2010 Ford F-250 Super Duty Front Master Differential Rebuild Kit
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$10.27Product Specifications- Notes: COMPAT w/SPICER SERIES: 1280, 1310, 1410;STYLE: SLIP YOKE; BEARING ID / BORE: 1.3780 INCH / 35 MM;CENTERLINE: 2.28 INCH / 58 MM;MOUNT WIDTH: 6.62 INCH / 168 MM;STYLE: ROUND FRAME;COMPLETE MOUNT;
- Centerline Length: 2.28"
- Inside Diameter: 1.378"
- Mount Width: 6.62"
- Shape: Round
- UPC: 081106060563
- Part Description: 2010 Ford F-250 Super Duty Driveshaft Center Support Bearing
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 5.4L
Dorman® OE Solutions U Bolt Type Differential End Yoke for 2010 Ford F-250 Super Duty
PartNumber: 697-544$145.43Product Specifications- Notes: U-Bolt Type; Dana 44 Axle; Dana 60 Axle; 1310 U-Joint; Dana 70 Axle; 29 Spline
- Color: Silver
- Inside Diameter: 1.18"
- Length: 3.63"
- Material: Carbon Steel
- Mounting Hardware Included: No
- Mounting Hole Diameter: 0.331"
- Mounting Hole Quantity: 4
- Package Contents: 1 Differential End Yoke
- Spline Quantity: 29
- U Bolt(s) Included: No
- Universal Joint(s) Included: No
- UPC: 037495173353
- Width: 3"
- Part Description: 2010 Ford F-250 Super Duty OE Solutions U Bolt Type Differential End Yoke
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$298.32Product Specifications- Drive Shaft Diameter (In): 2.75 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 41.5"
- Material: Steel
- Outside Diameter: 2.75"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic
- UPC: 037495362368
- Wall Thickness: 0.083"
- Part Description: 2010 Ford F-250 Super Duty OE Solutions Front Driveshaft
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 6.4L
$158.85Product Specifications- Notes: Standard Kit; Dana 60 Axle
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311500876
- Width: 2.50"
- Part Description: 2010 Ford F-250 Super Duty Front Differential Rebuild Kit With Sleeve
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$15.44 MSRP:$22.17You Save: $6.73 (31%)Product Specifications- Notes: F250, F350, W/Single Rear Wheel; F250 Super Duty
- Other Names: Front Seal, Oil Seal, Pinion Seal, Rear Seal, Seal
- Item Dimensions: 5.8 x 5.3 x 2.6 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1L3Z-4676-A, E8TZ-4676-B
- Part Description: 2010 Ford F-250 Super Duty Oil Seal
Vehicle Fitment- 2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL, 8 Cyl 7.3 L DIESEL
$9.15Product Specifications- Notes: with 10.500in Ring Gear;12 Bolt;Rear
- Bolt Hole Quantity: 12
- Configuration: One Piece
- Contains Applications: Y
- Length (in): 12.750"
- Thickness (in): 0.045"
- UPC: 023913682736
- Width (in): 12.250"
- Part Description: 2010 Ford F-250 Super Duty Differential Cover Gasket
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | 10 Cyl 6.8L
- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 5.4L
- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 6.4L
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2010 Ford F-250 Super Duty
PartNumber: 65-9546$371.25Product Specifications- Notes: with Single Rear Wheels (SRW);with 39-3/8" (1000 mm) Long Driveshaft;Supplied as new; Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 39.375"
- Length (mm): 1000
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2010 Ford F-250 Super Duty Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 6.4L
Dorman® OE Solutions U Bolt Type Differential End Yoke for 2010 Ford F-250 Super Duty
PartNumber: 697-529$143.10Product Specifications- Notes: U-Bolt Type; Dana 44 Axle; Dana 60 Axle; 1350 U-Joint; Dana 70 Axle; 29 Spline
- Color: Black
- Inside Diameter: 1.27"
- Length: 3.92"
- Material: Carbon Steel
- Mounting Hardware Included: No
- Mounting Hole Diameter: 1.19"
- Mounting Hole Quantity: 2
- Package Contents: 1 Differential End Yoke
- Spline Quantity: 29
- U Bolt(s) Included: No
- Universal Joint(s) Included: No
- UPC: 037495173209
- Width: 3"
- Part Description: 2010 Ford F-250 Super Duty OE Solutions U Bolt Type Differential End Yoke
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$63.25Product Specifications- Bolt Quantity: 0
- Carrier Main Cap Support: No
- Differential Cover Bolt Count: 12
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Filler Plug Included: No
- Finish: Silver/zinc Phosphate
- Gasket or Seal Included: No
- Material: Aluminum
- Package Contents: 1 Differential Cover
- UPC: 037495174985
- Part Description: 2010 Ford F-250 Super Duty OE Solutions Differential Cover
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 6.4L
$28.01Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 1 Pc Rear Driveshaft;Std Grade; Grease Fitting in Cross; 2 Pc Rear Driveshaft
- Dimension: 1.375" Cap Diameter
- Greasable: Yes
- Height (Inch): 2.30
- Length (Inch): 4.0
- Lube Fitting Location: Grease Fitting in Cross
- UPC: 083286128200
- Weight (Gross Pounds): 2.30
- Width (Inch): 4.0
- Part Description: 2010 Ford F-250 Super Duty Grade Standard U-Joint
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
- $15.44 MSRP:
$22.17You Save: $6.73 (31%)Product Specifications- Notes: F250, F350, W/Single Rear Wheel; F250 Super Duty
- Other Names: Front Seal, Oil Seal, Pinion Seal, Rear Seal, Seal
- Item Dimensions: 5.8 x 5.3 x 2.6 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1L3Z-4676-A, E8TZ-4676-B
- Part Description: 2010 Ford F-250 Super Duty Oil Seal
Vehicle Fitment- 2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL, 8 Cyl 7.3 L DIESEL
$14.66Product Specifications- Notes: 1.575" Bearing ID (40mm); 2.25" Center Line Height; Bearings ID = 1.5748 - 1.5743";U-Shaped; 2.25" Centerline; Bearings ID = 1.5748 - 1.5743"
- UPC: 656591060383
- Part Description: 2010 Ford F-250 Super Duty Driveshaft Center Support
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$162.72Product Specifications- Notes: 2.56" Centerline Height & 1.57" ID
- Bolt Hole Center: 6.618"
- Inside Diameter: 1.575"
- Outside Diameter: 4.606"
- UPC: 085311567312
- Width: 2.165"
- Part Description: 2010 Ford F-250 Super Duty Driveshaft Center Support Bearing
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2010 Ford F-250 Super Duty
PartNumber: 65-9300$365.75Product Specifications- Notes: with 37-1/2" (952 mm) Long Driveshaft;Supplied as new; Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 37.5"
- Length (mm): 952
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2010 Ford F-250 Super Duty Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 5.4L
$45.02Product Specifications- Color/Finish: Black/Epoxy E-coat
- Differential Cover Bolt Count: 12
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: No
- Differential Cover/Case Material: Low Carbon Steel
- Gasket Material: Not Applicable
- Gasket or Seal Included: No
- OE Part Number: E5TZ-4033A
- UPC: 019495215981
- Part Description: 2010 Ford F-250 Super Duty OE Solutions Differential Cover
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | 10 Cyl 6.8L
- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 5.4L
$15.06Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; 1 Pc Rear Driveshaft;Grease Fitting in Cross; Perf Grade; 2 Pc Rear Driveshaft;Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade
- Bearing Cap Diameter: 1.188"
- Lock Ring Size: 4.185"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286351608
- Part Description: 2010 Ford F-250 Super Duty Grade Performance™ Front U-Joint
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$16.10 MSRP:$23.12You Save: $7.02 (31%)Product Specifications- Notes: F250, F350, W/Dual Rear Wheels;W/O Dual Wheels; F250 Super Duty; Outer
- Item Dimensions: 3.8 x 1.6 x 3.9 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: F81Z-1240-BA
- Part Description: 2010 Ford F-250 Super Duty Outer Bearing
Vehicle Fitment- 2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
$41.93Product Specifications- Inside Diameter: 1.771"
- Outside Diameter: 2.952"
- UPC: 085311064637
- Width: 0.629"
- Part Description: 2010 Ford F-250 Super Duty Front Driveshaft Center Support
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$19.07Product Specifications- Notes: with Visteon Axle; with 10.5in Ring Gear
- Part Description: 2010 Ford F-250 Super Duty Rear Outer Differential Pinion Race
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$38.73Product Specifications- Notes: Vac Activated
- Housing Material: Metal and Plastic
- OE Part Number: 7C3Z9H465A, F81A 9H465-BA, F81Z 9H465-BA
- Package Contents: 4wd Vacuum Actuator
- Terminal Quantity: 3
- Terminal Type: Blade
- UPC: 019495414346
- Wiring Harness Included: No
- Part Description: 2010 Ford F-250 Super Duty OE Solutions 4Wd Hub Locking Solenoid
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$35.41Product Specifications- Notes: w/Spicer 60-SF Axle; w/Monobeam; w/9.75in Ring Gear
- Part Description: 2010 Ford F-250 Super Duty Front Inner Differential Bearing
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$9.14Product Specifications- Notes: 2 Pc Rear Driveshaft; Hardware 0.75" Bolt Length;1 Pc Rear Driveshaft; Hardware 0.75" Bolt Length;Hardware 0.75" Bolt Length
- Bolt Length (Inch): 0.75
- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 083286108202
- Width (Inch): 3.50
- Part Description: 2010 Ford F-250 Super Duty Universal Joint Strap Kit
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
- $16.10 MSRP:
$23.12You Save: $7.02 (31%)Product Specifications- Notes: F250, F350, W/Dual Rear Wheels;W/O Dual Wheels; F250 Super Duty; Outer
- Item Dimensions: 3.8 x 1.6 x 3.9 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: F81Z-1240-BA
- Part Description: 2010 Ford F-250 Super Duty Outer Bearing
Vehicle Fitment- 2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
$12.83Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 2 Pc Rear Driveshaft;Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft;Std Grade; Grease Fitting in Cross; 1 Pc Rear Driveshaft;Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft
- Bearing Cap Axis 1 Diameter: 1.19"
- Bearing Cap Axis 2 Diameter: 1.19"
- Bearing Cap Type: Plain
- Dimension: 1.188" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30"
- Length (Inch): 4.0"
- Length Axis 1: 4.19"
- Length Axis 2: 30.18"
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 826732593661
- Weight (Gross Pounds): 1.80"
- Width (Inch): 4.0"
- Part Description: 2010 Ford F-250 Super Duty Spicer 1410 Series Grade Standard U-Joint
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$6.78Product Specifications- Notes: Packaging Type: Box
- Material: Carbon Steel
- OE Part Number: F5UZ-4022-A
- UPC: 037495103718
- Part Description: 2010 Ford F-250 Super Duty OE Solution Rear Axle Vent
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$36.80Product Specifications- Notes: 2.30" Centerline Height & 1.57" ID w/Slinger
- Bolt Hole Center: 6.625"
- Inside Diameter: 1.574"
- Outside Diameter: 4.980"
- UPC: 085311493604
- Width: 1.890"
- Part Description: 2010 Ford F-250 Super Duty Driveshaft Center Support Bearing
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | 10 Cyl 6.8L
- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 5.4L
- 2010 Ford F-250 Super Duty | All Trims | 8 Cyl 6.4L
$17.63Product Specifications- Notes: w/Spicer 60-SF Axle; w/Monobeam; w/9.75in Ring Gear
- Part Description: 2010 Ford F-250 Super Duty Front Differential Carrier Race
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$21.46Product Specifications- Notes: w/Spicer 60-SF Axle; w/Monobeam; w/9.75in Ring Gear
- Part Description: 2010 Ford F-250 Super Duty Front Outer Differential Pinion Bearing
Vehicle Fitment- 2010 Ford F-250 Super Duty | All Trims | All Engines
$22.69 MSRP:$36.20You Save: $13.51 (38%)Product Specifications- Notes: W/O Dual Wheels; F250 Super Duty
- Other Names: Axle Seal, Hub Seal, Inner Seal
- Item Dimensions: 0.3 x 7.8 x 9.5 inches
- Item Weight: 0.80 Pounds
- Replaces: 2C3Z-1177-AB, 4C3Z-1S177-A, BRS-180, BRS-116
- Part Description: 2010 Ford F-250 Super Duty Inner Seal
Vehicle Fitment- 2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
1-30 of 232 Results
< Previous
12345
Next >