< Back ×
2010 Ford Ranger Driveline, Axles & 4WD
My Vehicle Change Vehicle
2010 Ford Ranger
$323.15Product Specifications- Drive Shaft Diameter (In): 1.75"
- Drive Shaft Wall Thickness (In): 0.095"
- Greaseable Drive Shaft: Yes
- Length: 30.75"
- Material: Steel
- OE Part Number: XL2Z-4A376-AA, ZZR0-25-100
- Outside Diameter: 1.75"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Automatic / Manual
- UPC: 037495119252
- Wall Thickness: 0.095"
- Part Description: 2010 Ford Ranger OE Solutions Front Driveshaft
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$14.19Product Specifications- Notes: 10 Bolt;with 8.800in Ring Gear;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 10
- Thickness (in): 0.031"
- UPC: 023913682552
- Part Description: 2010 Ford Ranger Axle Housing Cover Gasket
Vehicle Fitment- 2010 Ford Ranger | All Trims | 6 Cyl 4.0L
- 2010 Ford Ranger | All Trims | 4 Cyl 2.3L
$135.82Product Specifications- Notes: Master Kit; 7.5" Ring Gear;Master Kit; 7.50" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487047
- Width: 2.50"
- Part Description: 2010 Ford Ranger Rear Master Differential Rebuild Kit
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$111.31Product Specifications- Notes: Std Kit; w/Visteon Axle; w/8.8in Ring Gear
- Part Description: 2010 Ford Ranger Front Differential Master Bearing Kit
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$394.77Product Specifications- Notes: with 29-3/8" (746 mm) Long Driveshaft;Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: No
- Length: 29.375"
- Length (mm): 746
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2010 Ford Ranger Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2010 Ford Ranger | XL | 6 Cyl 4.0L
$14.56 MSRP:$21.27You Save: $6.71 (32%)Product Specifications- Notes: 4WD; Ranger; Left
- Location: Driver Side
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: F57Z-3254-BA
- Part Description: 2010 Ford Ranger Axle Seal
Vehicle Fitment- 2010 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$240.36Product Specifications- Notes: 8.8" Ring Gear; w/4.10 Axle Ratio
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- UPC: 019495105503
- Part Description: 2010 Ford Ranger OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$15.40Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 2010 Ford Ranger Grade Performance™ Rear U-Joint
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$253.32Product Specifications- Notes: 8.8" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- OE Part Number: 3L1Z4209AA, 5L3Z4209B, 8R3Z4209C, E3TZ-4209-J
- UPC: 019495105442
- Part Description: 2010 Ford Ranger OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$20.58Product Specifications- Notes: w/Spicer 35-SLA Axle; w/7.59in Ring Gear
- Part Description: 2010 Ford Ranger Front Inner Differential Pinion Bearing
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$99.62Product Specifications- ABS Ring Included: No
- Axle Nut Locking Type: Self Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 26 + 1 Blank
- Length: 20 3/8"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 27
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 32mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M22 x 1.5
- Part Description: 2010 Ford Ranger Remanufactured CV Axle Assembly
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$18.57 MSRP:$26.67You Save: $8.10 (31%)Product Specifications- Notes: Ranger
- Other Names: Oil Seal, Pinion Gear Seal, Pinion Seal
- Item Dimensions: 9.2 x 7.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: E8TZ-4676-C, F89Z-4676-AA
- Part Description: 2010 Ford Ranger Pinion Gear Seal
Vehicle Fitment- 2010 Ford Ranger | Base, Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 2010 Ford Ranger Grade Performance™ Rear U-Joint
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
Dorman® OE Solution Rear Ring And Pinion Bearing Installation Kit for 2010 Ford Ranger
PartNumber: 697-107$144.36Product Specifications- Notes: Std Design; 7.5" Ring Gear
- Bearing Type: Carrier and Pinion
- Material: Steel
- UPC: 019495105176
- Part Description: 2010 Ford Ranger OE Solution Rear Ring And Pinion Bearing Installation Kit
Vehicle Fitment- 2010 Ford Ranger | All Trims | 4 Cyl 2.3L
$12.30Product Specifications- Notes: with Visteon Axle; with 7.5in Ring Gear;w/Spicer 35-SLA Axle; w/7.59in Ring Gear
- Part Description: 2010 Ford Ranger Differential Bearing
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$230.78Product Specifications- Notes: 8.8" Ring Gear; w/4.56 Axle Ratio
- Gear Ratio: 4.56
- Item Grade: Standard Replacement
- UPC: 019495515678
- Part Description: 2010 Ford Ranger OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$31.60Product Specifications- Cone ID: 1.571"
- Cone Length: 0.851"
- Cone Radius: 0.09"
- Cup Length: 0.627"
- Cup Radius: 0.09"
- Outside Diameter: 2.875"
- UPC: 085311190367
- Width: 0.831"
- Part Description: 2010 Ford Ranger Center Axle Shaft Bearing Kit
Vehicle Fitment- 2010 Ford Ranger | All Trims | 4 Cyl 2.3L
- 2010 Ford Ranger | All Trims | 6 Cyl 4.0L
- $18.57 MSRP:
$26.67You Save: $8.10 (31%)Product Specifications- Notes: Ranger
- Other Names: Oil Seal, Pinion Gear Seal, Pinion Seal
- Item Dimensions: 9.2 x 7.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: E8TZ-4676-C, F89Z-4676-AA
- Part Description: 2010 Ford Ranger Pinion Gear Seal
Vehicle Fitment- 2010 Ford Ranger | Base, Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$17.07Product Specifications- Notes: with Visteon Axle; with 7.5in Ring Gear;with Visteon Axle; with 8.8in Ring Gear
- UPC: 724956020683
- Part Description: 2010 Ford Ranger Front Outer Differential Pinion Bearing
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$10.55Product Specifications- Notes: Incl Inside Lock Rings; Std Grade; Grease Fitting in Cross
- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Type: Plain
- Greasable: Yes
- Length Axis 1: 3.62
- Length Axis 2: 3.62
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Style: 4 Round Plain Bearings
- Universal Joint Style: Spicer 1330
- UPC: 083286002135
- Width: 3.622" Overall Axis
- Part Description: 2010 Ford Ranger Grade Standard U-Joint
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$198.08Product Specifications- Notes: 8.8" Ring Gear; w/3.73 Axle Ratio
- Gear Ratio: 3.73
- Item Grade: Standard Replacement
- UPC: 037495175883
- Part Description: 2010 Ford Ranger Oe Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$22.61Product Specifications- Cone ID: 1.406"
- Outside Diameter: 2.844"
- UPC: 085311256551
- Width: 1.218"
- Part Description: 2010 Ford Ranger Inner Axle Shaft Bearing Kit
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$16.19Product Specifications- Notes: Brute Force Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099226
- Part Description: 2010 Ford Ranger Front Greaseable U Joint
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$15.17 MSRP:$22.17You Save: $7.00 (32%)Product Specifications- Notes: All; Ranger
- Location: Driver Side; Passenger Side
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: E3TZ-1225-A
- Part Description: 2010 Ford Ranger Axle Shaft Bearing
Vehicle Fitment- 2010 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$121.24Product Specifications- Notes: Propeller Shaft
- Additional Contents: Boot Clamp, Snap Ring
- Bolt Circle Diameter: 3.596"
- Bolt Diameter: 0.347"
- Bolt Hole Quantity: 6
- Bolt Thread Sizes: M8 X 1.25
- Color/Finish: Natural
- Grease Included: Yes
- Housing Outside Diameter (in): 4.206"
- Housing Thickness (in): 1.394"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Steel
- Spline Count: 26
- Spline Diameter (In): 1.051"
- Spline Length (In): 1.297"
- UPC: 019495272397
- Part Description: 2010 Ford Ranger OE Solutions Front Propeller Shaft Cv Joint Kit
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$6.80Product Specifications- Notes: 1/4-28 Bolts
- Bolt Length: 1/4-28"
- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 083286108196
- Width (Inch): 3.50
- Part Description: 2010 Ford Ranger Universal Joint Strap Kit
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$9.26Product Specifications- Notes: with Visteon Axle; with 8.8in Ring Gear;with Visteon Axle; with 7.5in Ring Gear
- Cup Bore: 3.2500" / 82.55 mm
- Cup Length: 0.7950" / 20.193 mm
- Cup Radius: 0.1250" / 3,175 mm
- Part Description: 2010 Ford Ranger Automatic Transmission Transfer Shaft Race
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$45.86Product Specifications- Notes: 7.5" Ring Gear
- Color/Finish: Black/Epoxy E-coat
- Differential Cover Bolt Count: 10
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Differential Cover/Case Filler Plug Included: Yes
- Differential Cover/Case Material: Steel
- Gasket Material: Not Applicable
- Gasket or Seal Included: No
- OE Part Number: 1FAA26012, 6R3Z4033A, E3TZ4033A, ZZM026012
- UPC: 019495367093
- Part Description: 2010 Ford Ranger OE Solutions Differential Cover
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$6.48Product Specifications- Notes: 8.80" Ring Gear; FAG Global# FC67148.5; .830" Wide Brg.;FAG Global# FC67148.5; .830" Wide Brg.
- UPC: 670774196836
- Part Description: 2010 Ford Ranger Rear Axle Shaft Bearing
Vehicle Fitment- 2010 Ford Ranger | All Trims | All Engines
$60.01 MSRP:$90.93You Save: $30.92 (35%)Product Specifications- Notes: Ranger
- Other Names: U-Joint Kit, Universal Joints
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 4L5Z-4635-BA
- Part Description: 2010 Ford Ranger U-Joint Kit
Vehicle Fitment- 2010 Ford Ranger | Edge, FX4, Sport, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
1-30 of 175 Results
< Previous
12345
Next >