< Back ×
2010 Honda CR-V Driveline, Axles & 4WD
My Vehicle Change Vehicle
2010 Honda CR-V
$48.24Product Specifications- Quantity Per Application: 1
- UPC: 826732057378
- Part Description: 2010 Honda CR-V Differential Bearing
Vehicle Fitment- 2010 Honda CR-V | All Trims | All Engines
$46.13Product Specifications- Notes: Repair Kit; Incls Bolts; Only works w/Dorman Driveshaft 936-002;Repair Kit; Only Works w/Dorman Driveshaft 936-002; Incls Bolts
- Bearing Cap Diameter Axis 1: 0.787"
- Bearing Cap Diameter Axis 2: 0.787"
- Bearing Cap Finish: Steel
- Coating Type: Not Applicable
- Color/Finish: Silver
- Greasable: No
- Grease Type: Multi Purpose Bearing Grease
- Grease Zerks Included: No
- Length Between Inside Snap Rings Axis 1 (In): 2.165"
- Length Between Inside Snap Rings Axis 2 (In): 2.165"
- Pre Greased: Yes
- Seal Material: Rubber
- Snap Ring Type: Lip Seals
- Universal Joint Cross Material: Steel
- Universal Joint Type: Only fits Dorman driveshafts 936-001, 936-002, 936-003 and 936-007
- UPC: 019495516873
- Part Description: 2010 Honda CR-V OE Solutions Driveshaft Repair Kit
Vehicle Fitment- 2010 Honda CR-V | All Trims | All Engines
$553.77Product Specifications- Drive Shaft Diameter (In): 2.5"
- Drive Shaft Wall Thickness (In): 0.065"
- Greaseable Drive Shaft: No
- Length: 80.7"
- Material: Steel
- OE Part Number: 40100SWAA01, 40100SXSA01
- Outside Diameter: 2.5"
- Overall Length Adjustable: No
- Product Condition: New
- UPC: 019495391791
- Wall Thickness: 0.065"
- Part Description: 2010 Honda CR-V OE Solutions Rear Driveshaft
Vehicle Fitment- 2010 Honda CR-V | All Trims | All Engines
$496.65Product Specifications- Notes: with 81-1/8" (2060 mm) Long Driveshaft;Mexico Built;USA Built;Measurement taken from end of flange face to end of flange face;Supplied as new
- Greasable: No
- Length: 81.125"
- Length (mm): 2060
- Material: Steel
- Measurement Method: Measurement is taken end of one flange to end of the flange on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2010 Honda CR-V Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2010 Honda CR-V | All Trims | All Engines
$7.91Product Specifications- Notes: Right
- Cone ID: 1.0630"
- Cone Length: 0.580"
- Cone Radius: 0.140"
- Cup Length: 0.420"
- Cup Radius: 0.050"
- Outer Diameter: 1.980"
- UPC: 085311058773
- Width: 0.560"
- Part Description: 2010 Honda CR-V Front Passenger Side Wheel Bearing
Vehicle Fitment- 2010 Honda CR-V | All Trims | All Engines
$51.15 MSRP:$72.27You Save: $21.12 (30%)Product Specifications- Notes: Cr-V
- Other Names: Bearing, Shaft Bearings
- Item Dimensions: 3.3 x 3.0 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Bearing, Half Shaft (Ntn)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE, Special Edition, Touring | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$6.92 MSRP:$9.77You Save: $2.85 (30%)Product Specifications- Notes: Outer
- Other Names: Bearing C-Clip
- Item Dimensions: 1.6 x 1.6 x 0.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Circlip, Outer (33MM)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE, Touring | 4 Cyl 2.4 L GAS
$2.42 MSRP:$3.40You Save: $0.98 (29%)Product Specifications- Notes: Inner
- Other Names: Bearing C-Clip
- Item Dimensions: 2.5 x 2.5 x 0.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Circlip, Inner (55MM)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE, Touring | 4 Cyl 2.4 L GAS
$14.17 MSRP:$20.00You Save: $5.83 (30%)Product Specifications- Notes: 4WD, Type 2; Cr-V; Left
- Other Names: Axle Seal
- Item Dimensions: 2.0 x 2.0 x 0.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91203-P6R-003, 91207-PE9-015
- Part Description: 2010 Honda CR-V Oil Seal (35X50X8.5) (Nok)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$12.97 MSRP:$18.30You Save: $5.33 (30%)Product Specifications- Notes: Cr-V
- Item Dimensions: 2.2 x 1.6 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Seal, Half Shaft (Outer)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE, Special Edition, Touring | 4 Cyl 1.5 L GAS, 4 Cyl 2.4 L GAS
$15.22 MSRP:$21.48You Save: $6.26 (30%)Product Specifications- Notes: 4WD, Type 1; Cr-V; Right
- Other Names: Axle Seal
- Item Dimensions: 3.2 x 3.1 x 0.4 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91202-P6R-003
- Part Description: 2010 Honda CR-V Oil Seal (35X78X8.5) (Nok)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$21.83 MSRP:$30.85You Save: $9.02 (30%)Product Specifications- Notes: Cr-V
- Item Dimensions: 2.2 x 2.3 x 0.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91206-PG2-005
- Part Description: 2010 Honda CR-V Oil Seal (40X56X9) (Nok)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
$252.42 MSRP:$356.53You Save: $104.11 (30%)Product Specifications- Notes: 4WD; Cr-V; 4WD
- Location: Driver Side; Passenger Side
- Other Names: Hub & Bearing, Hub & Bearing Assembly
- Item Dimensions: 9.5 x 6.2 x 6.2 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Bearing Assembly, Rear Hub Unit
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$2958.94 MSRP:$4215.03You Save: $1256.09 (30%)Product Specifications- Notes: 4WD; Cr-V
- Other Names: Case, Viscous Coupler
- Item Dimensions: 20.9 x 8.9 x 8.3 inches
- Item Weight: 18.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 41011-R09-000
- Part Description: 2010 Honda CR-V Case Kit, T.C.D.
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$662.29 MSRP:$943.45You Save: $281.16 (30%)Product Specifications- Notes: US Built; Cr-V; Left; Usa, Mexico Built
- Location: Driver Side
- Item Dimensions: 30.6 x 7.2 x 6.2 inches
- Item Weight: 13.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44306-SXS-A100, 44306-SXS-A10RM
- Part Description: 2010 Honda CR-V Driveshaft Assembly, Driver Side
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
- $662.29 MSRP:
$943.45You Save: $281.16 (30%)Product Specifications- Notes: US Built; Cr-V; Left; Usa, Mexico Built
- Location: Driver Side
- Item Dimensions: 30.6 x 7.2 x 6.2 inches
- Item Weight: 13.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44306-SXS-A100, 44306-SXS-A10RM
- Part Description: 2010 Honda CR-V Driveshaft Assembly, Driver Side
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$252.42 MSRP:$356.53You Save: $104.11 (30%)Product Specifications- Notes: Cr-V
- Location: Driver Side; Passenger Side
- Other Names: Bearing, Wheel Bearings
- Item Dimensions: 4.6 x 4.1 x 4.2 inches
- Item Weight: 2.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44300-SJK-J01
- Part Description: 2010 Honda CR-V Bearing Assembly, Front Hub
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
- $600.63 MSRP:
$855.62You Save: $254.99 (30%)Product Specifications- Notes: Japan Built; Cr-V; Right; Japan Built
- Location: Passenger Side
- Item Dimensions: 27.9 x 5.2 x 4.5 inches
- Item Weight: 17.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44305-SWA-900
- Part Description: 2010 Honda CR-V Driveshaft Assembly, Passenger Side
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
- $600.63 MSRP:
$855.62You Save: $254.99 (30%)Product Specifications- Notes: Japan Built; Cr-V; Right; Japan Built
- Location: Passenger Side
- Item Dimensions: 27.9 x 5.2 x 4.5 inches
- Item Weight: 17.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44305-SWA-900
- Part Description: 2010 Honda CR-V Driveshaft Assembly, Passenger Side
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
- $643.00 MSRP:
$915.97You Save: $272.97 (30%)Product Specifications- Notes: US Built; Cr-V; Right; Usa, Mexico Built
- Location: Passenger Side
- Item Dimensions: 30.9 x 6.3 x 6.3 inches
- Item Weight: 13.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44305-SXS-A10, 44305-SXS-A110, 44305-SXS-A11RM
- Part Description: 2010 Honda CR-V Driveshaft Assembly, R
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
- $643.00 MSRP:
$915.97You Save: $272.97 (30%)Product Specifications- Notes: US Built; Cr-V; Right; Usa, Mexico Built
- Location: Passenger Side
- Item Dimensions: 30.9 x 6.3 x 6.3 inches
- Item Weight: 13.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44305-SXS-A10, 44305-SXS-A110, 44305-SXS-A11RM
- Part Description: 2010 Honda CR-V Driveshaft Assembly, R
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$14.18 MSRP:$20.02You Save: $5.84 (30%)Product Specifications- Notes: 4WD; Cr-V
- Other Names: Front Seal, Pinion Seal
- Item Dimensions: 2.3 x 2.3 x 0.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Oil Seal (40X56X9) (Nok)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
- $14.18 MSRP:
$20.02You Save: $5.84 (30%)Product Specifications- Notes: 4WD; Cr-V
- Other Names: Front Seal, Pinion Seal
- Item Dimensions: 2.3 x 2.3 x 0.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Oil Seal (40X56X9) (Nok)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$480.30 MSRP:$684.20You Save: $203.90 (30%)Product Specifications- Notes: Cr-V
- Other Names: Half-Shaft, Intermed Shaft
- Item Dimensions: 20.6 x 6.1 x 6.2 inches
- Item Weight: 8.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Shaft Assembly, Half (Automatic)
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$853.17 MSRP:$1215.35You Save: $362.18 (30%)Product Specifications- Notes: 4WD, Japan Built; Cr-V; Japan Built; Right
- Location: Passenger Side
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 37.9 x 5.5 x 4.4 inches
- Item Weight: 13.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Driveshaft Assembly, Passenger Side
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
- $853.17 MSRP:
$1215.35You Save: $362.18 (30%)Product Specifications- Notes: 4WD, Japan Built; Cr-V; Japan Built; Right
- Location: Passenger Side
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 37.9 x 5.5 x 4.4 inches
- Item Weight: 13.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Driveshaft Assembly, Passenger Side
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$53.13 MSRP:$75.05You Save: $21.92 (30%)Product Specifications- Notes: Japan Built; Cr-V; Japan Built
- Location: Driver Side; Passenger Side
- Other Names: Outer Boot
- Item Dimensions: 7.2 x 5.2 x 3.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44018-SJM-010, 44018-SJM-000
- Part Description: 2010 Honda CR-V Boot Set, Outboard
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE, Touring | 4 Cyl 1.5 L GAS, 4 Cyl 2.4 L GAS
$170.38 MSRP:$240.67You Save: $70.29 (30%)Product Specifications- Notes: 4WD, US Built; Cr-V; Usa, Mexico Built; Left
- Location: Driver Side
- Other Names: Inner Joint
- Item Dimensions: 7.5 x 6.0 x 4.7 inches
- Item Weight: 4.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Honda CR-V Joint, Inboard
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$41.63 MSRP:$58.82You Save: $17.19 (30%)Product Specifications- Notes: US Built; Cr-V; Usa, Mexico Built
- Location: Driver Side; Passenger Side
- Item Dimensions: 10.3 x 6.6 x 4.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 44018-SXS-A00
- Part Description: 2010 Honda CR-V Boot Set, Outboard
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
$83.18 MSRP:$117.50You Save: $34.32 (30%)Product Specifications- Notes: 4WD
- Other Names: Differential Assembly Insulator, Insulator
- Item Dimensions: 6.2 x 5.4 x 0.4 inches
- Item Weight: 1.00 Pounds
- Material: Rubber
- Fitment Type: Direct Replacement
- Replaces: 50721-S5C-003
- Part Description: 2010 Honda CR-V Rubber B, RR. Differential Mounting
Vehicle Fitment- 2010 Honda CR-V | EX, EX-L, LX, SE | 4 Cyl 2.4 L GAS
1-30 of 65 Results
< Previous
123
Next >