< Back ×
2010 Lincoln Navigator Driveline, Axles & 4WD
My Vehicle Change Vehicle
2010 Lincoln Navigator
$153.48Product Specifications- Notes: 9.75" Axle
- Inside Diameter: 2.068"; 2.28"
- OE Part Number: 3L1Z4947AB, 6L1Z4947A, 9L3Z4947B, 9L3Z4947C, 9L3Z4947D
- Outside Diameter: 3.9"
- Package Contents: 1 Differential Clutch Kit
- Shim Material: Steel
- UPC: 037495175548
- Part Description: 2010 Lincoln Navigator OE Solution Differential Disc Kit
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
Dorman® OE Solutions Front Propeller Shaft Cv Joint Kit With Plunged End for 2010 Lincoln Navigator
PartNumber: 932-206$146.78Product Specifications- Notes: Propeller Shaft; Plunged End
- Additional Contents: Gasket Maker, Boot Clamp, Snap Ring
- Bolt Circle Diameter: 3.857"
- Bolt Diameter: 0.416"
- Bolt Hole Quantity: 6
- Bolt Thread Sizes: M10 X 1.5
- Color/Finish: Natural
- Grease Included: Yes
- Housing Outside Diameter (in): 4.487"
- Housing Thickness (in): 1.326"
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Steel
- Spline Count: 28
- Spline Diameter (In): 1.068"
- Spline Length (In): 1.469"
- UPC: 019495343219
- Part Description: 2010 Lincoln Navigator OE Solutions Front Propeller Shaft Cv Joint Kit With Plunged End
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$29.93Product Specifications- Notes: w/Borg-Warner 4417 Transfer Case; 1Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2010 Lincoln Navigator Driveshaft Center Support Bearing
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
Dorman® OE Solution Rear Ring And Pinion Bearing Installation Kit for 2010 Lincoln Navigator
PartNumber: 697-101$138.77Product Specifications- Notes: Std Design; 8.8" Ring Gear; wo/Intermediate Axle Bearings
- Bearing Type: Carrier
- Material: Steel
- UPC: 019495104889
- Part Description: 2010 Lincoln Navigator OE Solution Rear Ring And Pinion Bearing Installation Kit
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$13.41Product Specifications- Notes: Std Grade; Sealed Unit
- Dimension: 1.188" Cap Diameter
- Height (Inch): 1.30
- Length (Inch): 4.0
- UPC: 031447983809
- Weight (Gross Pounds): 1.40
- Width (Inch): 4.0
- Part Description: 2010 Lincoln Navigator Grade Standard Non Greasable U-Joint
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$136.72 MSRP:$201.67You Save: $64.95 (33%)Product Specifications- Notes: 4WD, Hub Lock; Expedition, Navigator
- Location: Driver Side; Passenger Side
- Other Names: Actuator, Lock Hub Assembly
- Item Dimensions: 7.1 x 6.7 x 3.4 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5L1Z-3C247-A
- Part Description: 2010 Lincoln Navigator Lock Hub Assembly
Vehicle Fitment- 2010 Lincoln Navigator | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
$28.92Product Specifications- Cone ID: 2.284"
- Cone Length: 0.866"
- Cone Radius: 0.16"
- OE Part Number: F75Z4221AA
- Outside Diameter: 3.780"
- UPC: 085311377362
- Part Description: 2010 Lincoln Navigator Rear Axle Shaft Bearing
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$21.86Product Specifications- Notes: w/Borg-Warner 4417 Transfer Case; 1Spd; w/Part Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2010 Lincoln Navigator Driveshaft Center Support Bearing
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$553.15Product Specifications- Notes: with 22-1/4" (565 mm) Long Driveshaft;Measurement taken from end of CV Joint Flange Face to end of Flange Face
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: No
- Length: 22.25; 565
- Measurement Method: Measurement taken from end of CV Joint Flange Face to end of Flange Face
- Product Condition: Remanufactured
- Tubing Outer Diameter: 2.51; 63.59
- UPC: 884548093201
- Part Description: 2010 Lincoln Navigator Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$120.03Product Specifications- Attachment Method: Bolt On
- Bolt Hole Diameter: 0.27"
- Bolt Hole Quantity: 3
- Bolt Pattern Diameter: 5.496"
- Color: Black; Silver
- Grade Type: Standard
- Includes: 2 Wheel End Coupler
- Material: Aluminum; Plastic
- UPC: 037495586535
- Part Description: 2010 Lincoln Navigator OE Solutions 4Wd Hub Locking Actuator
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.188"
- Lock Ring Size: 3.624"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501782
- Part Description: 2010 Lincoln Navigator Grade Performance™ Front U-Joint
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$15.67 MSRP:$22.50You Save: $6.83 (31%)Product Specifications- Notes: Expedition, Navigator
- Other Names: Front Seal, Oil Seal, Pinion Seal, Rear Seal, Seal
- Item Dimensions: 5.8 x 5.3 x 2.6 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1L3Z-4676-A, E8TZ-4676-B
- Part Description: 2010 Lincoln Navigator Oil Seal
Vehicle Fitment- 2010 Lincoln Navigator | Base, Black Label, L, L Base, L Black Label, L Livery, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Premiere, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
$25.33Product Specifications- Notes: 9.75" Ring Gear
- Cone ID: 1.313"
- Cone Length: 1.125"
- Cone Radius: 0.03"
- Cup Length: 0.906"
- Cup Radius: 0.03"
- Outside Diameter: 3.000"
- UPC: 085311533485
- Width: 1.156"
- Part Description: 2010 Lincoln Navigator Rear Outer Axle Shaft Bearing Kit
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$19.07Product Specifications- Notes: with Visteon Axle; Independent Rear Suspension; with 9.75in Ring Gear
- Part Description: 2010 Lincoln Navigator Rear Outer Differential Pinion Race
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$17.42Product Specifications- Notes: (For Alum Drive Shaft)
- Outer Diameter: 1.188"
- Outside Lock-Up 1: 3.622"
- UPC: 085311561549
- Part Description: 2010 Lincoln Navigator Rear U Joint
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$15.72Product Specifications- Bore: 2.874"
- Boretite: No
- Outside Diameter: 2.883"
- Shaft: 1.811"
- UPC: 085311465465
- Width: 0.413"
- Part Description: 2010 Lincoln Navigator Axle Shaft Seal
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$445.41Product Specifications- Notes: Measurement taken from end of CV joint flange face to end of CV joint flange face;with 30-1/2" (774 mm) Long Driveshaft;Supplied as new
- Greasable: No
- Length: 30.5"
- Length (mm): 774
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2010 Lincoln Navigator Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
- $15.67 MSRP:
$22.50You Save: $6.83 (31%)Product Specifications- Notes: Expedition, Navigator
- Other Names: Front Seal, Oil Seal, Pinion Seal, Rear Seal, Seal
- Item Dimensions: 5.8 x 5.3 x 2.6 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1L3Z-4676-A, E8TZ-4676-B
- Part Description: 2010 Lincoln Navigator Oil Seal
Vehicle Fitment- 2010 Lincoln Navigator | Base, Black Label, L, L Base, L Black Label, L Livery, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Premiere, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
$99.79Product Specifications- ABS Ring Included: No
- Axle Nut Locking Type: Nylon Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 31
- Length: 24 15/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 45
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 17mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M10 x 1.5
- Part Description: 2010 Lincoln Navigator Remanufactured CV Axle Assembly
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$11.06Product Specifications- Notes: Std Grade; Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 30.18
- Bearing Cap Axis 2 Diameter: 30.18
- Bearing Cap Type: Plain
- Greasable: Yes
- Height: 1.300"
- Item Level GTIN: Item
- Length: 3.500"
- Length Axis 1: 92.05
- Length Axis 2: 3.62"
- Lock Ring Location: External
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Quantity Per Application: 1
- UPC: 083286001787
- Weight (Gross Pounds): 1.300
- Width: 3.500"
- Part Description: 2010 Lincoln Navigator Grade Standard U-Joint
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$21.52Product Specifications- Notes: Uni-Fit; Joint Dia 3.5"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.5"
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.75"
- Material: Silicone
- Number of Clamps: 2
- Rib Quantity: 6
- Shaft End Inside Diameter: 1.15"
- Split Or Solid Type: Solid
- UPC: 019495800804
- Part Description: 2010 Lincoln Navigator OE Solutions Front Inner Cv Joint Boot Kit
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$25.52Product Specifications- Housing Material: Plastic
- Node at Position: at 6:00 O'Clock
- OE Part Number: 6L349H465BA, 6L3Z-9E441-A, 6L3Z-9H465-B, E8AE 9H465-BA, E8AZ 9H465-B
- Package Contents: 4wd Switches
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 019495256274
- Wide: 13 mm
- Wiring Harness Included: No
- Part Description: 2010 Lincoln Navigator OE Solutions 4Wd Hub Locking Solenoid
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$99.76Product Specifications- ABS Ring Included: No
- Axle Nut Locking Type: Nylon Lock
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 31
- Length: 22"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 45
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 17mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M10 x 1.5
- Part Description: 2010 Lincoln Navigator Remanufactured CV Axle Assembly
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$46.22 MSRP:$67.00You Save: $20.78 (32%)Product Specifications- Notes: Expedition, Navigator
- Other Names: Side Bearings
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Lincoln Navigator Side Bearings
Vehicle Fitment- 2010 Lincoln Navigator | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
$9.26Product Specifications- Notes: with Visteon Axle; Independent Front Suspension; with 8.8in Ring Gear
- Cup Bore: 3.2500" / 82.55 mm
- Cup Length: 0.7950" / 20.193 mm
- Cup Radius: 0.1250" / 3,175 mm
- Part Description: 2010 Lincoln Navigator Automatic Transmission Transfer Shaft Race
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$17.07Product Specifications- Notes: with Visteon Axle; Independent Front Suspension; with 8.8in Ring Gear
- UPC: 724956020683
- Part Description: 2010 Lincoln Navigator Front Outer Differential Pinion Bearing
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$15.97Product Specifications- Cone ID: 1.781"
- Cone Length: 0.781"
- Cone Radius: 0.14"
- Cup Length: 0.656"
- Cup Radius: 0.03"
- OE Part Number: ZZL127305, 9759BR36, BTC9001, 9739NO36SET, ZZL127307, 4864213, 5R3Z4220AA, 5135660AB
- Outside Diameter: 3.062"
- UPC: 085311068826
- Width: 0.843"
- Part Description: 2010 Lincoln Navigator Rear Axle Shaft Bearing Kit
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$18.24Product Specifications- Notes: Uni-Fit; Joint Dia 3.44"; Packaging Type: Box; Pkg Quantity: 1;Uni-Fit; Joint Dia 3.44"
- Boot Color: Black
- Boot Material: Neoprene
- Joint End Inside Diameter: 4"
- Package Contents: 1 CV Joint Boot; 1 CV Joint Grease Pack; 2 Clamps
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.98"
- Split Or Solid Type: Solid
- UPC: 019495800798
- Vented Boot: No
- Part Description: 2010 Lincoln Navigator OE Solutions Front Outer Cv Joint Boot Kit
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$15.79Product Specifications- Notes: Brute Force Non Greaseable
- Outer Diameter: 1.188"
- Outside Lock-Up 1: 3.622"
- UPC: 085311099158
- Part Description: 2010 Lincoln Navigator Front Non Greaseable U Joint
Vehicle Fitment- 2010 Lincoln Navigator | All Trims | All Engines
$23.70 MSRP:$34.67You Save: $10.97 (32%)Product Specifications- Notes: Navigator; To 4/29/11
- Item Weight: 2.40 Pounds
- Replaces: 7L1Z-4621-AB, 7L1Z-4621-A, E5TZ-4616-A, TBAA-4621-A
- Part Description: 2010 Lincoln Navigator Front Pinion Bearing
Vehicle Fitment- 2010 Lincoln Navigator | Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
1-30 of 119 Results
< Previous
1234
Next >