< Back ×
2011 Ram 2500 Driveline, Axles & 4WD
My Vehicle Change Vehicle
2011 Ram 2500
$489.80Product Specifications- Notes: w/3.73 Axle Ratio; 11.5" Ring Gear
- Gear Ratio: 3.73
- Item Grade: Standard Replacement
- UPC: 037495170772
- Part Description: 2011 Ram 2500 OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
SKF® Driveshaft End Yoke for 2011 Ram 2500
PartNumber: UJ650$61.16Product Specifications- Notes: w/3 Joint Shaft:;w/2 Joint Shaft:
- Earhole Diameter: 1.0620"
- UPC: 085311556156
- Width: 3.469"
- Part Description: 2011 Ram 2500 Driveshaft End Yoke
Vehicle Fitment- 2011 Ram 2500 | All Trims | 6 Cyl 6.7L
- 2011 Ram 2500 | All Trims | 8 Cyl 5.7L
$451.48Product Specifications- Notes: Measurement taken from end of flange face to end of flange face;with 31-13/16" (808 mm) Long Driveshaft;Supplied as new
- Greasable: Yes
- Length: 31.812"
- Length (mm): 808
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2011 Ram 2500 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2011 Ram 2500 | All Trims | 6 Cyl 6.7L
- 2011 Ram 2500 | All Trims | 8 Cyl 5.7L
- 2011 Ram 2500 | All Trims | 8 Cyl 4.7L
$481.86Product Specifications- Notes: 11.5" Ring Gear; w/4.10 Axle Ratio
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- UPC: 037495170789
- Part Description: 2011 Ram 2500 OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
SKF® U Joint for 2011 Ram 2500
PartNumber: UJ479$48.41Product Specifications- Notes: w/3 Joint Shaft:;w/2 Joint Shaft:
- Inside Lock-Up 1: 3.702"
- Outer Diameter: 1.375"
- UPC: 085311541152
- Part Description: 2011 Ram 2500 U Joint
Vehicle Fitment- 2011 Ram 2500 | All Trims | 6 Cyl 6.7L
- 2011 Ram 2500 | All Trims | 8 Cyl 5.7L
$56.71 MSRP:$85.45You Save: $28.74 (34%)Product Specifications- Notes: 2 Wheel Drive, 2500 & 3500 W/11.5 Axle W/O Dual Rear Wheels; 4 Wheel Drive, 2500 & 3500 W/11.5 Axle W/O Dual Rear Wheels; Ram 2500; 11.50 Rear Axle
- Other Names: Cover Gasket, Gasket
- Item Dimensions: 0.4 x 20.5 x 19.5 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Ram 2500 Gasket-Rear Cover
Vehicle Fitment- 2011 Ram 2500 | Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Outdoorsman, Power Wagon, Rebel, SLT, ST, Tradesman | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
$56.17Product Specifications- Notes: with 9.250in Ring Gear;14 Bolt;with AAM Engine;w/Independent Front Susp
- Bolt Hole Quantity: 14
- Configuration: One Piece
- Contains Applications: Y
- Length (in): 13.06"
- Thickness (in): 0.130"
- UPC: 023913682828
- Width (in): 12.040"
- Part Description: 2011 Ram 2500 Differential Cover Gasket
Vehicle Fitment- 2011 Ram 2500 | All Trims | 6 Cyl 6.7L
- 2011 Ram 2500 | All Trims | 8 Cyl 4.7L
- 2011 Ram 2500 | All Trims | 8 Cyl 5.7L
$298.32Product Specifications- Drive Shaft Diameter (In): 2.5 In.
- Drive Shaft Wall Thickness (In): 0.095 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 35.5"
- Material: Steel
- Outside Diameter: 2.5"
- Overall Length Adjustable: Yes
- Transmission Type: Manual
- UPC: 037495354998
- Wall Thickness: 0.095"
- Part Description: 2011 Ram 2500 OE Solutions Front Driveshaft
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$48.72Product Specifications- Type: A-1
- Part Description: 2011 Ram 2500 Differential Bearing
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$44.57Product Specifications- Cone ID: 1.968"
- Cone Length: 0.905"
- Cone Radius: 0.059"
- Cup Length: 0.748"
- Cup Radius: 0.059"
- Outside Diameter: 3.543"
- UPC: 085311068505
- Width: 0.974"
- Part Description: 2011 Ram 2500 Axle Shaft Bearing Kit
Vehicle Fitment- 2011 Ram 2500 | All Trims | 6 Cyl 6.7L
$12.51Product Specifications- Bolt Hole Quantity: 8
- Inside Diameter: 72 mm
- Material: Non-Asbestos Fiber
- Mounting Hole Diameter: 11.5 mm
- Outside Diameter: 121 mm
- Shape: Circular
- Thickness: 0.3 mm
- UPC: 037495953733
- Part Description: 2011 Ram 2500 OE Solutions Rear Axle Shaft Flange Gasket
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$39.81 MSRP:$59.60You Save: $19.79 (34%)Product Specifications- Item Dimensions: 1.6 x 3.8 x 4.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 5086686AB
- Part Description: 2011 Ram 2500 Seal-Axle Drive Shaft
$29.93Product Specifications- Type: A-1
- Part Description: 2011 Ram 2500 Driveshaft Center Support Bearing
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$20.70Product Specifications- Notes: Std Grade; 1.375" Bearing Cap Dia;Std Grade; 2 Joint Driveshaft; 1.375" Bearing Cap Dia;Std Grade; 3 Joint Driveshaft; 1.375" Bearing Cap Dia
- Dimension: 1.375" Cap Diameter
- Height (Inch): 2.30
- Length (Inch): 4.0
- UPC: 083286122468
- Weight (Gross Pounds): 2.30
- Width (Inch): 4.0
- Part Description: 2011 Ram 2500 Grade Standard U-Joint
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$24.55Product Specifications- Notes: with AAM Differential; with 11.5in Ring Gear; 4.125in O.D.
- Part Description: 2011 Ram 2500 Rear Inner Differential Pinion Race
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$12.83Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft; 1.188" Bearing Cap Dia;Std Grade; Grease Fitting in Cross; 1.188" Bearing Cap Dia;Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft; 1.188" Bearing Cap Dia
- Bearing Cap Axis 1 Diameter: 1.19"
- Bearing Cap Axis 2 Diameter: 1.19"
- Bearing Cap Type: Plain
- Dimension: 1.188" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30"
- Length (Inch): 4.0"
- Length Axis 1: 4.19"
- Length Axis 2: 30.18"
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 826732593661
- Weight (Gross Pounds): 1.80"
- Width (Inch): 4.0"
- Part Description: 2011 Ram 2500 Spicer 1410 Series Grade Standard U-Joint
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$35.60Product Specifications- Notes: American 9.25" Axle
- Cone ID: 1.875"
- Cone Length: 1.156"
- Cone Radius: 0.14"
- UPC: 085311071383
- Width: 1.187"
- Part Description: 2011 Ram 2500 Rear Inner Axle Shaft Bearing
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
OEM (Genuine) 2011 Ram 2500 U-Joint
PartNumber: 68206321AB$145.40 MSRP:$221.00You Save: $75.60 (35%)Product Specifications- Other Names: Universal Joints
- Item Dimensions: 5.6 x 5.1 x 3.7 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 68206321AC
- Part Description: 2011 Ram 2500 U-Joint
$17.07Product Specifications- Notes: with AAM Axle; with 10.5in Ring Gear;with AAM Axle; with 11.5in Ring Gear
- UPC: 724956020683
- Part Description: 2011 Ram 2500 Front Outer Differential Pinion Bearing
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$29.19Product Specifications- Cone ID: 2.25"
- Outside Diameter: 3.843"
- UPC: 085311356725
- Width: 0.968"
- Part Description: 2011 Ram 2500 Rear Driver Side Axle Shaft Bearing Kit
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$9.26Product Specifications- Notes: with AAM Differential; with 10.5in Ring Gear;with AAM Differential; with 11.5in Ring Gear
- Cup Bore: 3.2500" / 82.55 mm
- Cup Length: 0.7950" / 20.193 mm
- Cup Radius: 0.1250" / 3,175 mm
- Part Description: 2011 Ram 2500 Automatic Transmission Transfer Shaft Race
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$27.46Product Specifications- Notes: American 11.50" Axle
- Cone ID: 2.625"
- Cone Length: 1.183"
- Cone Radius: 0.14"
- UPC: 085311051934
- Width: 1.183"
- Part Description: 2011 Ram 2500 Rear Axle Shaft Bearing
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$19.60Product Specifications- Cone ID: 2.25"
- Cone Length: 0.969"
- Cone Radius: 0.14"
- OE Part Number: 53430, TCAJ4242A, 925174, 181043, 95LX4221, 668100, BG57, 927017, 668102, SBN 28682SKF, 9759BR28682, 44302-5066, 1687505, 915680, B5Y4221A, EBN4260, 181041, 95LK4221, E8N4260, 915684, 94302-5066, E8W4260, NPN683
- UPC: 085311053105
- Width: 0.968"
- Part Description: 2011 Ram 2500 Rear Inner Axle Shaft Bearing
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
OEM (Genuine) 2011 Ram 2500 U-Joint
PartNumber: 68206321AB$145.40 MSRP:$221.00You Save: $75.60 (35%)Product Specifications- Other Names: Universal Joints
- Item Dimensions: 5.6 x 5.1 x 3.7 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 68206321AC
- Part Description: 2011 Ram 2500 U-Joint
$21.08Product Specifications- Notes: w/3 Joint Shaft:; Brute Force Greaseable;w/2 Joint Shaft:; Brute Force Greaseable
- Outer Diameter: 1.188"
- Outside Lock-Up 1: 4.178"
- UPC: 085311541381
- Part Description: 2011 Ram 2500 Center Greaseable U Joint
Vehicle Fitment- 2011 Ram 2500 | All Trims | 8 Cyl 5.7L
$19.04Product Specifications- Notes: American 11.50" Axle;American 10.50" Axle
- Bore: 3.541"
- Boretite: No
- Outer Diameter: 3.546"
- Shaft: 2.3240"
- UPC: 085311296601
- Width: 0.591"
- Part Description: 2011 Ram 2500 Rear Differential Pinion Seal
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
$16.83Product Specifications- Notes: American 9.25" Axle
- Cone ID: 1.375"
- Cone Length: 1"
- Cone Radius: 0.09"
- OE Part Number: 8970844670, 9036634019, 0019816905, C0DW4625A, 3156066, XW3706, 1549628, 926803, C0WD4625A, COWD4625A, 79192186, 5086690AA, 90368-34049, 9759HM88649, 33 12 1 468 894, 1-206-573, 2070079, 8729113, N058570, C0WD4630A, 2070070, 1L2Z1201AA, 1-204-304, 1458HM8
- UPC: 085311056199
- Width: 1"
- Part Description: 2011 Ram 2500 Front Outer Axle Shaft Bearing
Vehicle Fitment- 2011 Ram 2500 | All Trims | All Engines
SKF® Center U Joint for 2011 Ram 2500
PartNumber: UJ330A$17.62Product Specifications- Notes: w/3 Joint Shaft:;w/2 Joint Shaft:
- Outer Diameter: 1.188"
- Outside Lock-Up 1: 4.178"
- UPC: 085311541398
- Part Description: 2011 Ram 2500 Center U Joint
Vehicle Fitment- 2011 Ram 2500 | All Trims | 8 Cyl 5.7L
SKF® Rear U Joint for 2011 Ram 2500
PartNumber: UJ331C$17.42Product Specifications- Notes: w/2 Joint Shaft:; (For Alum Drive Shaft);w/3 Joint Shaft:; (For Alum Drive Shaft)
- Outer Diameter: 1.188"
- Outside Lock-Up 1: 3.622"
- UPC: 085311561549
- Part Description: 2011 Ram 2500 Rear U Joint
Vehicle Fitment- 2011 Ram 2500 | All Trims | 6 Cyl 6.7L
- 2011 Ram 2500 | All Trims | 8 Cyl 5.7L
$30.45 MSRP:$45.60You Save: $15.15 (34%)Product Specifications- Notes: 4 Wheel Drive; Ram 2500, 3500
- Other Names: Pinion Seal, Seal
- Item Dimensions: 0.8 x 3.9 x 4.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Ram 2500 Seal-Drive PINION
Vehicle Fitment- 2011 Ram 2500 | Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
1-30 of 225 Results
< Previous
12345
Next >