< Back ×
2013 Ram 3500 Driveline, Axles & 4WD
My Vehicle Change Vehicle
2013 Ram 3500
$489.80Product Specifications- Notes: w/3.73 Axle Ratio; 11.5" Ring Gear
- Gear Ratio: 3.73
- Item Grade: Standard Replacement
- UPC: 037495170772
- Part Description: 2013 Ram 3500 OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$59.07Product Specifications- Notes: American 11.50" Axle
- Cone ID: 2"
- Cone Length: 1.059"
- Cone Radius: 0.14"
- Outside Diameter: 4.375"
- UPC: 085311380645
- Width: 1.059"
- Part Description: 2013 Ram 3500 Rear Inner Axle Shaft Bearing
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$484.11Product Specifications- Notes: with 31-13/16" (808 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face;Supplied as new
- Greasable: Yes
- Length: 31.812"
- Length (mm): 808
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2013 Ram 3500 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2013 Ram 3500 | All Trims | 6 Cyl 6.7L
- 2013 Ram 3500 | All Trims | 8 Cyl 5.7L
$481.86Product Specifications- Notes: 11.5" Ring Gear; w/4.10 Axle Ratio
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- UPC: 037495170789
- Part Description: 2013 Ram 3500 OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$51.34Product Specifications- Notes: Dual Rr. Whls.
- Cone ID: 2.25"
- Cone Length: 1.219"
- Cone Radius: 0.25"
- Cup Length: 0.937"
- Cup Radius: 0.13"
- Outside Diameter: 4.125"
- UPC: 085311398541
- Width: 1.187"
- Part Description: 2013 Ram 3500 Rear Inner Axle Shaft Bearing Kit
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$56.71 MSRP:$85.45You Save: $28.74 (34%)Product Specifications- Notes: 3500 W/292 Mm Axle Single Rear Wheels; 3500 W/292 Mm Axle Dual Rear Wheels; 3500 W/300 Mm Axle Dual Rear Wheels
- Other Names: Cover Gasket, Gasket
- Item Dimensions: 0.4 x 20.5 x 19.5 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2013 Ram 3500 Gasket-Rear Cover
Vehicle Fitment- 2013 Ram 3500 | Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
$318.84Product Specifications- Notes: w/Serrated Pinion Flange
- Drive Shaft Diameter (In): 2.5 In.
- Drive Shaft Wall Thickness (In): 0.095 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 35.5"
- Material: Steel
- Outside Diameter: 2.5"
- Overall Length Adjustable: Yes
- Transmission Type: Manual
- UPC: 037495354998
- Wall Thickness: 0.095"
- Part Description: 2013 Ram 3500 OE Solutions Front Driveshaft
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$29.93Product Specifications- Notes: w/Borg-Warner 4447 Transfer Case; 2Spd; w/Part Time 4WD;w/Borg-Warner 4446 Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 2013 Ram 3500 Driveshaft Center Support Bearing
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
SKF® U Joint for 2013 Ram 3500
PartNumber: UJ479$48.41Product Specifications- Notes: w/2 Joint Rr. Shaft & Flat Faced Frt. Pin. Flange:;w/3 Joint Rr. Shaft & Flat Faced Frt. Pin. Flange:;w/2 Joint Rr. Shaft & Serrated Frt. Pin. Flange:;w/3 Joint Rr. Shaft & Serrated Frt. Pin. Flange:
- Inside Lock-Up 1: 3.702"
- Outer Diameter: 1.375"
- UPC: 085311541152
- Part Description: 2013 Ram 3500 U Joint
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
GMB® Universal Joint for 2013 Ram 3500
PartNumber: 230-0155$27.53Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft;Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft
- Bearing Cap Diameter Axis 1 (in): 1.3800
- Bearing Cap Diameter Axis 2 (in): 1.3800
- Bearing Cap Finish: Machined
- Greasable: Yes
- Grease Zerks Included: Yes
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Outside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (OSR) Outside Snap Ring Style
- UPC: 083286001558
- Part Description: 2013 Ram 3500 Universal Joint
Vehicle Fitment- 2013 Ram 3500 | All Trims | 6 Cyl 6.7L
$12.51Product Specifications- Bolt Hole Quantity: 8
- Inside Diameter: 72 mm
- Material: Non-Asbestos Fiber
- Mounting Hole Diameter: 11.5 mm
- Outside Diameter: 121 mm
- Shape: Circular
- Thickness: 0.3 mm
- UPC: 037495953733
- Part Description: 2013 Ram 3500 OE Solutions Rear Axle Shaft Flange Gasket
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$39.81 MSRP:$59.60You Save: $19.79 (34%)Product Specifications- Item Dimensions: 1.6 x 3.8 x 4.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 5086686AB
- Part Description: 2013 Ram 3500 Seal-Axle Drive Shaft
$17.07Product Specifications- Notes: with AAM Axle; with 11.5in Ring Gear
- UPC: 724956020683
- Part Description: 2013 Ram 3500 Front Outer Differential Pinion Bearing
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$44.57Product Specifications- Cone ID: 1.968"
- Cone Length: 0.905"
- Cone Radius: 0.059"
- Cup Length: 0.748"
- Cup Radius: 0.059"
- Outside Diameter: 3.543"
- UPC: 085311068505
- Width: 0.974"
- Part Description: 2013 Ram 3500 Axle Shaft Bearing Kit
Vehicle Fitment- 2013 Ram 3500 | All Trims | 6 Cyl 6.7L
GMB® U-Joint for 2013 Ram 3500
PartNumber: 214-0160$21.97Product Specifications- Notes: Non-Greasable; 3 Joint Driveshaft;Non-Greasable; 2 Joint Driveshaft
- Height (Inch): 1.30
- Length (Inch): 4.0
- UPC: 083286112797
- Weight (Gross Pounds): 1.80
- Width (Inch): 4.0
- Part Description: 2013 Ram 3500 U-Joint
Vehicle Fitment- 2013 Ram 3500 | All Trims | 8 Cyl 5.7L
$36.55Product Specifications- Notes: American 11.50" Axle
- Cup Length: 0.812"
- Cup Radius: 0.130"
- Outside Diameter: 4.375"
- UPC: 085311380652
- Width: 0.812"
- Part Description: 2013 Ram 3500 Rear Inner Axle Shaft Bearing Race
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$9.26Product Specifications- Notes: with AAM Differential; with 11.5in Ring Gear
- Cup Bore: 3.2500" / 82.55 mm
- Cup Length: 0.7950" / 20.193 mm
- Cup Radius: 0.1250" / 3,175 mm
- Part Description: 2013 Ram 3500 Automatic Transmission Transfer Shaft Race
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
OEM (Genuine) 2013 Ram 3500 U-Joint
PartNumber: 68206321AB$145.40 MSRP:$221.00You Save: $75.60 (35%)Product Specifications- Other Names: Universal Joints
- Item Dimensions: 5.6 x 5.1 x 3.7 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 68206321AC
- Part Description: 2013 Ram 3500 U-Joint
$13.41Product Specifications- Notes: Std Grade; 2 Joint Driveshaft; Sealed Unit;Std Grade; 3 Joint Driveshaft; Sealed Unit
- Dimension: 1.188" Cap Diameter
- Height (Inch): 1.30
- Length (Inch): 4.0
- UPC: 031447983809
- Weight (Gross Pounds): 1.40
- Width (Inch): 4.0
- Part Description: 2013 Ram 3500 Grade Standard Non Greasable U-Joint
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$36.28Product Specifications- Cone ID: 2.1654"
- Cone Length: 0.905"
- Cone Radius: 0.14"
- Cup Length: 0.807"
- Cup Radius: 0.02"
- Outside Diameter: 3.543"
- UPC: 085311885607
- Width: 0.984"
- Part Description: 2013 Ram 3500 Rear Axle Shaft Bearing Kit
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade
- Bearing Cap Diameter: 1.188"
- Lock Ring Size: 3.624"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501782
- Part Description: 2013 Ram 3500 Grade Performance™ Front U-Joint
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$11.34Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft;Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft
- Dimension: 1.188" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 4.0
- Lube Fitting Location: Grease Fitting in Cross
- UPC: 083286122444
- Weight (Gross Pounds): 1.80
- Width (Inch): 4.0
- Part Description: 2013 Ram 3500 Grade Standard U-Joint
Vehicle Fitment- 2013 Ram 3500 | All Trims | 8 Cyl 5.7L
$35.60Product Specifications- Notes: American 9.25" Axle
- Cone ID: 1.875"
- Cone Length: 1.156"
- Cone Radius: 0.14"
- UPC: 085311071383
- Width: 1.187"
- Part Description: 2013 Ram 3500 Rear Inner Axle Shaft Bearing
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
OEM (Genuine) 2013 Ram 3500 U-Joint
PartNumber: 68206321AB$145.40 MSRP:$221.00You Save: $75.60 (35%)Product Specifications- Other Names: Universal Joints
- Item Dimensions: 5.6 x 5.1 x 3.7 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 68206321AC
- Part Description: 2013 Ram 3500 U-Joint
$11.06Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft;Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft
- Bearing Cap Axis 1 Diameter: 30.18
- Bearing Cap Axis 2 Diameter: 30.18
- Bearing Cap Type: Plain
- Greasable: Yes
- Height: 1.300"
- Item Level GTIN: Item
- Length: 3.500"
- Length Axis 1: 92.05
- Length Axis 2: 3.62"
- Lock Ring Location: External
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Quantity Per Application: 1
- UPC: 083286001787
- Weight (Gross Pounds): 1.300
- Width: 3.500"
- Part Description: 2013 Ram 3500 Grade Standard U-Joint
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$29.19Product Specifications- Notes: Single Rr. Whls.
- Cone ID: 2.25"
- Outside Diameter: 3.843"
- UPC: 085311356725
- Width: 0.968"
- Part Description: 2013 Ram 3500 Rear Driver Side Axle Shaft Bearing Kit
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$27.46Product Specifications- Cone ID: 2.625"
- Cone Length: 1.183"
- Cone Radius: 0.14"
- UPC: 085311051934
- Width: 1.183"
- Part Description: 2013 Ram 3500 Rear Axle Shaft Bearing
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$19.04Product Specifications- Notes: American 11.50" Axle
- Bore: 3.541"
- Boretite: No
- Outer Diameter: 3.546"
- Shaft: 2.3240"
- UPC: 085311296601
- Width: 0.591"
- Part Description: 2013 Ram 3500 Rear Differential Pinion Seal
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$19.60Product Specifications- Notes: Single Rr. Whls.
- Cone ID: 2.25"
- Cone Length: 0.969"
- Cone Radius: 0.14"
- OE Part Number: 53430, TCAJ4242A, 925174, 181043, 95LX4221, 668100, BG57, 927017, 668102, SBN 28682SKF, 9759BR28682, 44302-5066, 1687505, 915680, B5Y4221A, EBN4260, 181041, 95LK4221, E8N4260, 915684, 94302-5066, E8W4260, NPN683
- UPC: 085311053105
- Width: 0.968"
- Part Description: 2013 Ram 3500 Rear Inner Axle Shaft Bearing
Vehicle Fitment- 2013 Ram 3500 | All Trims | All Engines
$30.45 MSRP:$45.60You Save: $15.15 (34%)Product Specifications- Notes: 4WD; Ram 2500, 3500
- Other Names: Pinion Seal, Seal
- Item Dimensions: 0.8 x 3.9 x 4.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2013 Ram 3500 Seal-Drive PINION
Vehicle Fitment- 2013 Ram 3500 | Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
1-30 of 239 Results
< Previous
12345
Next >