29 products about Land Rover Range Rover Driveline, Axles & 4WD found
Filter Results
Sort
View by
Product Specifications- Greasable: Yes
- Length: 24.25"
- Length (mm): 615,95
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Land Rover Range Rover Remanufactured Driveshaft/ Prop Shaft
More Info Product Specifications- Type: A-1
- Part Description: Land Rover Range Rover Differential Bearing
Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 2.935"
- UPC: 085311099479
- Part Description: Land Rover Range Rover Rear U Joint
More Info Product Specifications- Greasable: Yes
- Length: 23.25"
- Length (mm): 590
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Land Rover Range Rover Remanufactured Driveshaft/ Prop Shaft
More Info Product Specifications- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: Land Rover Range Rover Grade Performance™ Rear U-Joint
More Info Product Specifications- Type: A-1
- Part Description: Land Rover Range Rover Driveshaft Center Support Bearing
Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099226
- Part Description: Land Rover Range Rover Front Greaseable U Joint
More Info Product Specifications- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.94
- Length Axis 2: 2.94
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286011007
- Weight (Gross Pounds): 1.0
- Width (Inch): 3.50
- Part Description: Land Rover Range Rover Grade Standard U-Joint
More Info Product Specifications- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: Land Rover Range Rover Driveshaft Center Support Bearing
More Info Product Specifications- Cone ID: 1.7812"
- Cone Length: 0.7812"
- Cone Radius: 0.1400"
- Cup Length: 0.5937"
- Cup Radius: 0.0300"
- Outer Diameter: 3.0625"
- UPC: 085311068840
- Width: 0.7812"
- Part Description: Land Rover Range Rover Rear Differential Bearing
More Info Product Specifications- Type: 87
- Part Description: Land Rover Range Rover Differential Crankshaft Seal
Product Specifications- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: Land Rover Range Rover Spicer 1310 Series Grade Standard U-Joint
More Info Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099219
- Part Description: Land Rover Range Rover Front Non Greaseable U Joint
More Info Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099677
- Part Description: Land Rover Range Rover Front U Joint
More Info Product Specifications- Cup Length: 0.593"
- Cup Radius: 0.030"
- Outside Diameter: 3.063"
- UPC: 085311057219
- Width: 0.781"
- Part Description: Land Rover Range Rover Rear Axle Shaft Bearing Race
More Info Product Specifications- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Finish: Steel
- Coating Type: Grease
- Color/Finish: Silver
- Greasable: No
- Grease Type: Multi Purpose Bearing Grease
- Grease Zerks Included: No
- Length Between Inside Snap Rings Axis 1: 3.219"
- Length Between Inside Snap Rings Axis 2: 3.219"
- Pre Greased: Yes
- Seal Material: Rubber
- Snap Ring Type: External
- Universal Joint Cross Material: Steel
- UPC: 885484839441
- Part Description: Land Rover Range Rover OE Solutions Rear Driveshaft Repair Kit
More Info Product Specifications- UPC: 805890720928
- Part Description: Land Rover Range Rover Premium™ Axle Shaft Seal
Product Specifications- UPC: 805890720935
- Part Description: Land Rover Range Rover Premium™ Axle Shaft Seal
Product Specifications- Cone ID: 1.5"
- Cone Length: 1.01"
- Cone Radius: 0.14"
- UPC: 085311051521
- Width: 0.937"
- Part Description: Land Rover Range Rover Rear Axle Shaft Bearing
More Info Product Specifications- Bearing Inside Diameter: 1.781; 45.242
- Length: 0.781; 19.842
- UPC: 670774290602
- Part Description: Land Rover Range Rover Differential Bearing
More Info Product Specifications- ABS Ring Tooth Quantity: 48
- Axle Nut Included: Yes
- Axle Nut Length: 16
- Axle Nut Socket Size: 40.2
- Axle Nut Thread Size: M27x1.5
- Axle Nut Type: Bihexagonal
- Boot Color: Black
- Boot Material: Neoprene
- Compressed Length: 27.17
- Inboard Joint Type: Flange
- Outboard Joint Type: Conventional
- Outboard Spline Quantity: 30
- Prop 65 - Short Label: Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
- Prop 65 Yes/No: Yes
- UPC: 883331016137
- Part Description: Land Rover Range Rover Rear Passenger Side CV Axle Assembly
More Info Product Specifications- Boot Color: Black
- Compressed Length: 40.47
- Inboard Spline Quantity: 29
- Outboard Spline Quantity: 31
- Prop 65 - Short Label: Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
- Prop 65 Yes/No: Yes
- UPC: 883331136019
- Part Description: Land Rover Range Rover Front Passenger Side CV Axle Assembly
More Info Product Specifications- ABS Ring Included: Yes
- ABS Ring Tooth Count: 48
- Axle Nut Locking Type: Stake
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 30
- Length: 38 1/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 30
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 43mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M27 x 1.5
- Part Description: Land Rover Range Rover Remanufactured CV Axle Assembly
More Info Product Specifications- ABS Count: 60
- ABS Style: Teeth
- Length: 25 3/4"
- OBJ Spline Count: 24
- UPC: 883331835202
- Part Description: Land Rover Range Rover Front Driver Side CV Axle Assembly
More Info Product Specifications- ABS Count: 60
- ABS Style: Teeth
- Length: 39 5/8"
- OBJ Spline Count: 24
- UPC: 883331835219
- Part Description: Land Rover Range Rover Front Passenger Side CV Axle Assembly
More Info Product Specifications- Bore: 1.772"
- Design: Single Row Radial
- Inner Race Bore: 45.000 mm
- Inner Race Radius: 0.040"
- Inner Race Width: 0.748"
- Outer Diameter: 85 mm
- Outer Race Outside Diameter: 3.347"
- Outer Race Radius: 0.040"
- Outer Race Width: 0.748"
- Outside Diameter: 3.347"
- Series: 200
- Type: A-1
- Width: 0.748"
- Part Description: Land Rover Range Rover Driveshaft Center Support Bearing
More Info Product Specifications- Part Description: Land Rover Range Rover Differential Bearing Race
Product Specifications- Part Description: Land Rover Range Rover Differential Bearing Race
Product Specifications- Part Description: Land Rover Range Rover Differential Pinion Bearing