< Back ×
Lincoln Mark VII Air Suspension & Components
Select vehicle to guarantee fit
Make
Model
Year
< Back to View All
Chassis & Brakes
- Department
- Brands
- Prices
$20.86Product Specifications- Connector Color: Blue
- Connector Gender: Female
- Housing Length: 1.66
- Housing Material: Plastic
- Housing Width: 1.2
- Mounting Hole Quantity: 0
- Package Contents: 1 Air Suspension Spring Solenoid; Hardware
- Port Outside Diameter: 0.37
- Port Quantity: 1
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Bullet
- UPC: 889245185921
- Wire Quantity: 0
- Part Description: Lincoln Mark VII Air Suspension Spring Solenoid
$99.75Product Specifications- UPC: 656591570066
- Part Description: Lincoln Mark VII Rear Air Spring
$67.88Product Specifications- Position: Front
- UPC: 813566027233
- Part Description: Lincoln Mark VII New Front Air Spring Bag
$25.10Product Specifications- UPC: 656591575504
- Part Description: Lincoln Mark VII Vibration Isolator Kit
- $67.88Product Specifications
- Position: Rear
- UPC: 813566027110
- Part Description: Lincoln Mark VII New Rear Air Spring Bag
$55.40Product Specifications- Fitting Thread Diameter: 10 mm
- Fittings Included: No
- Housing Material: Plastic
- Maximum Diameter: 85 mm
- Mounting Hardware Included: No
- Mounting Hole Quantity: 1
- Overall Height: 143.3 mm
- Package Contents: 1 Suspension Air Compressor Dryer
- Port 1 Outside Diameter: 4 mm
- Port 2 Outside Diameter: 13.9 mm
- Port Quantity: 5
- UPC: 889245185945
- Width: 48.5 mm
- Part Description: Lincoln Mark VII OE Solutions Air Suspension Compressor Dryer
$99.75Product Specifications- UPC: 656591570073
- Part Description: Lincoln Mark VII Front Air Spring
- Product Specifications
- Dryer: With Dryer
- Outlet: 4 Outlets
- Part Description: Lincoln Mark VII New Air Suspension Compressor
Product Specifications- UPC: 656591575900
- Part Description: Lincoln Mark VII Rear Suspension Air Spring Solenoid
Product Specifications- Other Names: Solenoid Valve, Spring Valve, Valve Solenoid
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: Lincoln Mark VII Spring Valve
Product Specifications- Color/Finish: Black
- E-Waste: No
- Fitting Connection Type: Quick Connect
- Fittings Included: Yes
- Housing Material: Plastic
- Maximum Diameter (in/mm): 80 mm
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Mount Hole Quantity: 1
- Mounting Hardware Included: No
- Overall Height (in/mm): 146 mm
- Port 1 Outside Diameter (in/mm): 10 mm
- Port 2 Outside Diameter (in/mm): 10 mm
- Port Quantity: 2
- Product Condition: New
- UPC: 884548226746
- Width (in/mm): 87 mm
- Part Description: Lincoln Mark VII Air Suspension Compressor Dryer
Product Specifications- Other Names: Air Spring, Coil Spring, Spring
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: Lincoln Mark VII Air Spring
- Product Specifications
- Other Names: Air Spring
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: Lincoln Mark VII Air Spring
Product Specifications- Bearing Plate Included: No
- Bellow Color: Black
- Bellow Material: Rubber
- E-Waste: No
- Grade Type: Regular
- Installation Hardware Included: No
- Lower Mount Type: Bottom Piston
- Lower Mounting Isolator Included: No Isolator Required
- Maintenance Info: Check for any debris buildup around the air springs, supply lines or mounting brackets. If necessary, clean debris off with an unpressurized water source.; Do not exceed your vehicle's load carrying capacity.; Periodically check condition of air spring bladders, air supply lines and air supply line connections for cracks, poor seals or any sign of deterioration.; The following tips will help maintain the proper operation of this part:
- Mounting Hardware Included: No
- Package Contents: Air Spring
- Product Condition: New
- Suspension Spring Design: Standard Replacement
- Troubleshooting Tip: Air compressor runs continuously; Bouncy or choppy ride; Common signs of wear indicating replacement may be required:; Related diagnostic trouble codes set; Sagging suspension; Suspension bottoms out; Vehicle stance is lower than normal; Warning on instrument panel cluster or driver information center
- UPC: 884548142336
- Upper Mount Type: Plate
- Upper Mounting Isolator Included: Yes
- Part Description: Lincoln Mark VII Remanufactured Suspension Air Spring
- Product Specifications
- Part Description: Lincoln Mark VII Air Suspension Spring
Product Specifications- Connector/Terminal Configuration: Blade/Male
- Module Housing Material: Plastic
- Part Description: Lincoln Mark VII Remanufactured Suspension Control Module
Product Specifications- Bearing Plate Included: No
- Bellow Color: Black
- Bellow Material: Rubber
- E-Waste: No
- Grade Type: Regular
- Installation Hardware Included: No
- Lower Mount Type: Eyelet (2)
- Lower Mounting Isolator Included: No Isolator Required
- Maintenance Info: Check for any debris buildup around the air springs, supply lines or mounting brackets. If necessary, clean debris off with an unpressurized water source.; Do not exceed your vehicle's load carrying capacity.; Periodically check condition of air spring bladders, air supply lines and air supply line connections for cracks, poor seals or any sign of deterioration.; The following tips will help maintain the proper operation of this part:
- Mounting Hardware Included: No
- Package Contents: Air Spring
- Product Condition: New
- Suspension Spring Design: Standard Replacement
- Troubleshooting Tip: Air compressor runs continuously; Bouncy or choppy ride; Common signs of wear indicating replacement may be required:; Related diagnostic trouble codes set; Sagging suspension; Suspension bottoms out; Vehicle stance is lower than normal; Warning on instrument panel cluster or driver information center
- UPC: 884548216372
- Upper Mount Type: Base Cup
- Upper Mounting Isolator Included: No Isolator Required
- Part Description: Lincoln Mark VII Suspension Air Spring
- Product Specifications
- Part Description: Lincoln Mark VII Air Suspension Solenoid
- Product Specifications
- Other Names: Dryer, Electronic Control
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: Lincoln Mark VII Electronic Control
- Product Specifications
- Compressor: W/O Air Compressor
- Gas Shocks: W/O Shock Absorbers
- Solenoids: W/O Air Spring Solenoid
- Part Description: Lincoln Mark VII New Front Air Spring Bag Set
- Product Specifications
- Compressor: W/O Air Compressor
- Gas Shocks: W/O Shock Absorbers
- Solenoids: With Air Spring Solenoid
- Part Description: Lincoln Mark VII Rear Air Spring Bag Set
- Product Specifications
- Part Description: Lincoln Mark VII Air Suspension Spring
- Product Specifications
- Part Description: Lincoln Mark VII Air Suspension Compressor
- Product Specifications
- UPC: 817778024110
- Part Description: Lincoln Mark VII Air Suspension Solenoid Valve Set
- Product Specifications
- Compressor: W/O Air Compressor
- Gas Shocks: W/O Shock Absorbers
- Solenoids: W/O Air Spring Solenoid
- Part Description: Lincoln Mark VII New Rear Air Spring Bag Set
- Product Specifications
- UPC: 813566029350
- Part Description: Lincoln Mark VII Air Suspension Solenoid Valve
- Product Specifications
- Compressor: With Air Suspension Compressor
- Gas Shocks: W/O Shock Absorbers
- Solenoids: W/O Air Spring Solenoid
- Part Description: Lincoln Mark VII Front and Rear Air Suspension Kit
- Product Specifications
- Part Description: Lincoln Mark VII Air Suspension Spring
- Product Specifications
- Part Description: Lincoln Mark VII Air Suspension Compressor
- Product Specifications
- UPC: 813566029305
- Part Description: Lincoln Mark VII Air Compressor Isolators
1-30 of 33 Results
< Previous
12
Next >