< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Trailblazer Throttle Body
PartNumber: 12679524
Product Specifications- Notes: 5.3L;6.0L
- Other Names: Throttle Body
- Item Dimensions: 10.7 x 6.9 x 5.4 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12572658, 12580760
- Part Description: 2008 Chevrolet Trailblazer Throttle Body
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$277.23 MSRP:$523.10You Save: $245.87 (48%)
Dorman® Throttle Body Assemblies for 2008 Chevrolet Trailblazer
PartNumber: 977-360Product Specifications- Adjustable: No
- Bore Diameter: 3.154''
- Color/Finish: Metal
- Connector/Terminal Type: Blade
- Electrical Connection Type: Female Socket
- Fuel Injectors Included: No
- Fuel System Type: Gas
- Gasket or Seal Included: No
- Housing Material: Cast Aluminum
- Idle Air Control Motor Included: No
- Inlet Quantity: 0
- Installation Hardware Included: No
- OE Part Number: 12616437
- Outlet Quantity: 0
- UPC: 019495280910
- Part Description: 2008 Chevrolet Trailblazer Throttle Body Assemblies
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 6 Cyl 4.2L
$162.83
Cardone Reman® Remanufactured Throttle Body for 2008 Chevrolet Trailblazer
PartNumber: 67-3008Product Specifications- Gaskets Included: No Gasket Required
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2008 Chevrolet Trailblazer Remanufactured Throttle Body
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 8 Cyl 5.3L
- 2008 Chevrolet Trailblazer | All Trims | 8 Cyl 6.0L
$83.15
Spectra Premium® Fuel Injection Throttle Body for 2008 Chevrolet Trailblazer
PartNumber: TB1073Product Specifications- UPC: 627785018602
- Part Description: 2008 Chevrolet Trailblazer Fuel Injection Throttle Body
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 6 Cyl 4.2L
$247.05
hitachi® Fuel Injection Throttle Body for 2008 Chevrolet Trailblazer
PartNumber: ETB0024Product Specifications- Notes: Includes: Gasket; Grade: Actual OE; Terminal Quantity: 6; Availability: Available to Order; Bore Dia: 87.0; Gasket Or Seal Included: Yes; Idle Air Control Motor Included: No; Throttle Body Type: Electric; Throttle Position Sensor Included: Yes
- Actuation Type: Electric
- Bore Diameter: 87.0 mm
- Gasket or Seal Included: Yes
- Hardware Included: No
- Idle Air Control Motor Included: No
- Manufacturer: Hitachi
- New or Remanufactured: New
- OE Part Number: 12580760
- Qty Needed Per Unit: 1
- Terminal Connector Type: Blade
- Terminal Gender: Male
- Terminal Quantity: 6
- Throttle Body Type: Electric
- Throttle Position Sensor Included: Yes
- UPC: 840151060283
- Part Description: 2008 Chevrolet Trailblazer Fuel Injection Throttle Body
Vehicle Fitment- 2008 Chevrolet Trailblazer | LT | 8 Cyl 5.3L
- 2008 Chevrolet Trailblazer | SS | 8 Cyl 6.0L
- 2008 Chevrolet Trailblazer | Base | 8 Cyl 5.3L
$126.10OEM (Genuine) 2008 Chevrolet Trailblazer Throttle Body
PartNumber: 12694872
Product Specifications- Notes: 4.2L
- Other Names: Throttle Body
- Item Dimensions: 8.4 x 6.7 x 5.7 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12616437
- Part Description: 2008 Chevrolet Trailblazer Throttle Body
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LT | 6 Cyl 4.2 L GAS
$237.10 MSRP:$447.38You Save: $210.28 (48%)
Dorman® Throttle Body Assemblies for 2008 Chevrolet Trailblazer
PartNumber: 977-014Product Specifications- Adjustable: No
- Color/Finish: Gray and Black
- Connector/Terminal Type: Male/Blade
- Electrical Connection Type: Female/Blade
- Housing Material: Aluminum
- Installation Hardware Included: No
- OE Part Number: 12580760, 217-2422
- UPC: 019495277194
- Part Description: 2008 Chevrolet Trailblazer Throttle Body Assemblies
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 8 Cyl 5.3L
- 2008 Chevrolet Trailblazer | All Trims | 8 Cyl 6.0L
$114.84
Cardone Reman® Remanufactured Throttle Body for 2008 Chevrolet Trailblazer
PartNumber: 67-3022Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- Bore Diameter: 77mm
- E-Waste: Yes
- Housing Color/Finish: Gray
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Inlet Diameter: 85mm
- Inlet Type: Circle
- Original Equipment Replacement: Yes
- Outlet Diameter: 77mm
- Outlet Type: Circle
- Part Description: 2008 Chevrolet Trailblazer Remanufactured Throttle Body
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 6 Cyl 4.2L
$83.60
Spectra Premium® Fuel Injection Throttle Body for 2008 Chevrolet Trailblazer
PartNumber: TB1011Product Specifications- Connector: 6 Pin Male
- Inside Diameter: 3 7/16"
- Length: 7 1/8"
- UPC: 627785015069
- Width: 5 3/4"
- Part Description: 2008 Chevrolet Trailblazer Fuel Injection Throttle Body
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | 8 Cyl 5.3L
- 2008 Chevrolet Trailblazer | All Trims | 8 Cyl 6.0L
$124.45
FAQ for Throttle Body Repair
Q: How to remove the FCI Connectors?
A:
First, you should slide the lever lock forward while pressing down on the lever lock release tab. Next, you should disconnect the connector from the component, locate the dress cover locking tabs at the corners of the dress cover, and slide the terminal position assurance (TPA) up one notch on both ends of the connector. Finally, you should pull the wire out of the back of the connector.
By Bob
GM Specialist
02/11/2022Q: How to clean the Throttle Body?
A:
First, you should remove the air cleaner resonator outlet duct, inspect the throttle body bore and the throttle valve plate for deposits, and then clean the throttle body bore as well as the throttle valve plate. Next, you should install the air cleaner resonator outlet duct.
By Bob
GM Specialist
02/11/2022Q: How to test for a short to voltage in a circuit?
A:
First, you should set the rotary dial of the DMM to the V (DC) position. Next, you should connect the positive lead of the DMM to one end of the circuit to be tested. In addition, you should connect the negative lead of the DMM to good ground. Then, you should turn on the ignition and operate all accessories. If the voltage measured is greater than 1 volt, there is a short voltage in the circuit.
By Bob
GM Specialist
02/11/2022Q: How to remove the AFL/EPC Connectors?
A:
First, you should remove the connector, locate the connector position assurance (CPA) on the top of the wire dress cover, slide the lever lock forward, and disconnect the connector from the component. Next, you should locate the dress cover locking tabs at the corners of the dress cover, release the locking tabs, and remove the dress cover. In addition, you should release the rear lower half of the wire dress cover and remove the nosepiece. Finally, you should release the terminals and pull the wire out of the back of the connector.
By Bob
GM Specialist
02/11/2022Q: What should be noted when cleaning the Throttle Body?
A:
You should turn off the ignition before inserting your fingers into the throttle bore. Unexpected movement of the throttle blade could cause personal injury.
By Bob
GM Specialist
02/11/2022Q: How to install the Throttle Body Assembly?
A:
First, you should install the new throttle body gasket, the throttle body, and the air cleaner outlet duct. In addition, you should connect the throttle body engine coolant hoses and the throttle actuator motor electrical connector. In addition, you should refill the cooling system, operate the accelerator pedal and monitor the throttle angles. Finally, you should inspect for coolant leaks.
By Bob
GM Specialist
02/11/2022Q: What should be noted when removing the JST Connectors?
A:
You should be careful not to remove the TPA from the connector while there are terminals present in the connector body.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the throttle body bolts and nuts?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
02/11/2022Q: How to remove the JST Connectors?
A:
First, you should remove the connector from the component, locate the two indents of the terminal position assurance (TPA) located on the bottom of the connector body, raise the TPA on both sides of the connector, and release the terminals. Next, you should pull the wire out of the back of the connector.
By Bob
GM Specialist
02/11/2022Q: What should be noted when servicing the Handling Idle Air Control Valve?
A:
You should be careful not to push or pull on the IAC valve pintle or soak the IAC valve in any liquid cleaner or solvent.
By Bob
GM Specialist
01/11/2022See more FAQs (5)