< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Avalanche
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Avalanche Booster Assembly
PartNumber: 19417219
Product Specifications- Other Names: Booster Assembly, Brake Booster
- Item Dimensions: 17.6 x 13.3 x 12.5 inches
- Item Weight: 10.80 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19432806
- Part Description: 2009 Chevrolet Avalanche Booster Assembly
Vehicle Fitment- 2009 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$136.72 MSRP:$258.00You Save: $121.28 (48%)
Cardone Reman® Remanufactured Vacuum Power Brake Booster w/o Master Cylinder for 2009 Chevrolet Avalanche
PartNumber: 54-77090Product Specifications- Notes: without Master Cylinder
- Booster Type: Vacuum
- Casting Material: Steel
- Color: Powder Coated Gray
- Diaphragm Diameter: 10.790"
- Diaphragm Type: Dual
- E-Waste: No
- Master Cylinder: Without
- Master Cylinder Stud Thread Size: M10 x 1.5
- Material: Steel
- Part Description: 2009 Chevrolet Avalanche Remanufactured Vacuum Power Brake Booster w/o Master Cylinder
Vehicle Fitment- 2009 Chevrolet Avalanche | All Trims | All Engines
$98.24
Centric® Power Brake Booster for 2009 Chevrolet Avalanche
PartNumber: 160.81241Product Specifications- UPC: 805890902096
- Part Description: 2009 Chevrolet Avalanche Power Brake Booster
Vehicle Fitment- 2009 Chevrolet Avalanche | All Trims | All Engines
FAQ for Brake Booster Repair
Q: What is the power vacuum brake booster installation procedure?
A:
Install a new brake booster gasket, the power vacuum brake booster, and the brake booster nuts. Make sure to tighten the nuts to 33 Nm, connect the brake booster pushrod to the brake pedal pivot and install the stop lamp switch. Next, install the brake booster pushrod retainer, and the retainer bolt and tighten to 10 Nm. Install the vacuum hose to the check valve, and install the master cylinder and the 2 master cylinder nuts. Tighten the nuts to 33 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the hydraulic brake booster installation procedure?
A:
First install the gasket, the booster assembly, and the 4 booster to bulkhead nuts and tighten to 33 Nm. Next, install the stop lamp switch and the master cylinder to the brake booster and tighten to 33 Nm. Connect the return hose, the steering gear, and the inlet hoses. Finally bleed the hydraulic booster system, release the park brake and unblock the wheels.
By Bob
GM Specialist
01/11/2022Q: What is the power brake booster vacuum sensor service procedure?
A:
Turn the ignition switch OFFF and apply the brake pedal several times until the brake pedal becomes firm to deplete the power brake booster vacuum reserve. Next disconnect the power brake booster vacuum sensor electrical connector.
By Bob
GM Specialist
01/11/2022