< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
Power Steering Lines & Hoses
- Department
- Brands
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Pressure Hose
PartNumber: 25858603
Product Specifications- Notes: 1/2 Ton; Escalade Esv
- Other Names: Power Steering Pressure Hose, Pressure Hose
- Item Dimensions: 7.5 x 3.0 x 14.6 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac Escalade ESV Pressure Hose
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$91.58 MSRP:$146.09You Save: $54.51 (38%)
OEM (Genuine) 2010 Cadillac Escalade ESV Return Hose
PartNumber: 15812565
Product Specifications- Notes: 1/2 Ton
- Other Names: Power Steering Return Hose, Return Hose
- Item Dimensions: 9.4 x 29.3 x 0.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac Escalade ESV Return Hose
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$55.80 MSRP:$92.39You Save: $36.59 (40%)
OEM (Genuine) 2010 Cadillac Escalade ESV Pipe Kit
PartNumber: 19167837
Product Specifications- Notes: 1/2 Ton
- Location: Passenger Side
- Other Names: Pipe Kit
- Item Dimensions: 3.3 x 2.8 x 19.5 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac Escalade ESV Pipe Kit
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
Gates® Power Steering Return Line Hose Assembly Cooler To Reservoir for 2010 Cadillac Escalade ESV
PartNumber: 352281Product Specifications- Notes: Cut to Length, 20"; Cut to fit
- End 1 Diameter: 0.375"
- End 1 Type: I.D. Hose
- Length: 37"
- UPC: 770075666301
- Part Description: 2010 Cadillac Escalade ESV Power Steering Return Line Hose Assembly Cooler To Reservoir
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | 8 Cyl 6.2L
OEM (Genuine) 2010 Cadillac Escalade ESV Pipe Kit, Steering Gear (Right)
PartNumber: 19167838
Product Specifications- Notes: 1/2 Ton
- Location: Driver Side
- Other Names: Pipe Kit
- Item Dimensions: 6.1 x 5.8 x 20.4 inches
- Item Weight: 2.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac Escalade ESV Pipe Kit, Steering Gear (Right)
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
Gates® Power Steering Pressure Line Hose Assembly for 2010 Cadillac Escalade ESV
PartNumber: 352182Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: Male Quick Connect
- End 2 Diameter (mm): 16 mm
- End 2 Type: Male O-Ring
- Length: 36"
- Switch Port: Without Switch Port
- UPC: 770075609070
- Part Description: 2010 Cadillac Escalade ESV Power Steering Pressure Line Hose Assembly
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | 8 Cyl 6.2L
Gates® Power Steering Return Line Hose Assembly Gear To Cooler for 2010 Cadillac Escalade ESV
PartNumber: 352183Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: Male Quick Connect
- End 2 Type: I.D. Hose
- Length: 28"
- UPC: 770075547501
- Part Description: 2010 Cadillac Escalade ESV Power Steering Return Line Hose Assembly Gear To Cooler
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | 8 Cyl 6.2L
FAQ for Power Steering Hose Repair
Q: What is the recommended torque for the Power Steering Gear inlet hose retaining plate bolt?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
02/11/2022Q: What should be done for the power steering gear inlet hose fitting?
A:
You should remove as much power steering fluid from the power steering fluid reservoir as possible, and then place drain pans under the vehicle as needed.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the power steering gear outlet pipe/hose?
A:
The proper way is to install the power steering gear outlet pipe to the steering gear, connect the power steering fluid cooler hose and hose clamp to the steering gear, clean any excess fluid from the vehicle and remove the drain pans, and then fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: What should be done for the power steering gear outlet hose service?
A:
You should disconnect the power steering gear outlet hose from the power steering fluid cooler, pull the power steering gear outlet hose out of the steering gear, keep all open connections in the power steering system clean and free of debris, use the remover/installer J44586 to replace the steering gear seals, and then fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the power steering gear outlet pipe/hose?
A:
The procedure is to place drain pans under the vehicle as needed, disconnect the power steering fluid cooler hose clamp and hose from the steering gear, and then remove the power steering gear outlet pipe from the steering gear.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the power steering gear inlet pipe/hose?
A:
The proper way is to install the power steering gear inlet hose to the power brake booster and hand tighten only, install the power steering gear inlet hose to the power steering gear, and then fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: What should be done before replacing the power steering gear outlet pipe/hose?
A:
You should remove the engine shield.
By Bob
GM Specialist
02/11/2022Q: What should be done before replacing the power steering gear inlet pipe/hose (Gas Without Hydroboost)?
A:
You should remove the engine shield.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the power steering gear inlet pipe/hose?
A:
The procedure is to remove the power steering gear inlet hose from the power brake booster, remove the power steering gear inlet hose from the power steering gear, and then remove the power steering gear inlet hose from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the Power Steering Gear Inlet Hose fitting?
A:
The recommended torque is 32 Nm (24 lb-ft).
By Bob
GM Specialist
02/11/2022See more FAQs (5)