< Back ×
2010 Chevrolet Traverse Fuel Line
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
$70.98Product Specifications- Notes: Pump to Rail Pipe
- Color: Silver
- End 1 Hose Connector Type: Hose Barb
- End 2 Hose Connector Type: Hose Barb
- Grade Type: Standard
- Inside Diameter: 0.1''
- Length: 4.''
- Material: Stainless Steel
- Maximum Pressure: 75 PSI
- Outside Diameter: 0.2''
- UPC: 885484360402
- Part Description: 2010 Chevrolet Traverse Fuel Feed Line
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
FAQ for Fuel Line Repair
Q: How to install the fuel feed pipe (LLT) (3.6L)?
A:
You shall position the new fuel feed pipe to the cylinder head and high-pressure fuel pump, install the fuel feed pipe fitting, the low side fuel pressure service port cap, the fuel tank cap, the high-pressure pump shield, and the fuel injection sight shield.
By Bob
GM Specialist
01/11/2022Q: How to install the chassis fuel line?
A:
You shall position the fuel feed and EVAP pipes to the vehicle individually, and install the plastic retainers, the fuel feed/EVAP pipe clip and nut, the fuel feed/EVAP pipe clip, the air cleaner assembly, and the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: How to remove the fuel feed pipe (LLT) (3.6L)?
A:
You shall remove the fuel injection sight shield, the high-pressure pump shield, the fuel feed pipe bolts from the cylinder heads, and the fuel feed pipe from the engine and high-pressure fuel pump.
By Bob
GM Specialist
01/11/2022Q: How to remove the fuel feed intermediate pipe (LLT) (3.6L)?
A:
You shall remove the fuel injection sight shield, the high-pressure pump shield, the foam insulator from the pipes, and the high-pressure fuel pipe from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel pump shield bolt?
A:
It is 10N.m(89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the fuel feed intermediate pipe (LLT) (3.6L)?
A:
You shall position the new high-pressure fuel pipe to the high-pressure fuel pump fitting and left fuel rail, and install the low-side fuel pressure service port cap, the fuel tank cap, the high-pressure pump shield, and the fuel injection sight shield.
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for servicing the fuel pipe shield?
A:
The procedure is to remove the fuel injection sight shield and the air cleaner assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the chassis fuel line?
A:
You shall remove the fuel injector sight shield, air cleaner assembly, the fuel feed/EVAP pipe assembly clip from the body, the fuel feed/EVAP pipe assembly clip nut and clip from the stud, and the plastic retainers from the old pipes using a soapy solution.
By Bob
GM Specialist
01/11/2022Q: How do you install the fuel feed intermediate pipe?
A:
You can install the fuel tank cap, the high-pressure pump shield, and the sight shield for fuel injection.
By Omar
GM Specialist
10/03/2022Q: How do you remove the fuel feed pipe?
A:
You can remove the fuel injection sight shield, the high-pressure pump shield, and the fuel feed pipe.
By Bob
GM Specialist
10/03/2022See more FAQs (10)